public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
To: "devicetree@vger.kernel.org" <devicetree@vger.kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>,
	Marcel Ziswiler <marcel.ziswiler@toradex.com>,
	Fabio Estevam <festevam@gmail.com>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	Oleksandr Suvorov <oleksandr.suvorov@toradex.com>,
	Philippe Schenker <philippe.schenker@toradex.com>,
	Igor Opanyuk <igor.opanyuk@toradex.com>,
	Rob Herring <robh+dt@kernel.org>,
	NXP Linux Team <linux-imx@nxp.com>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Shawn Guo <shawnguo@kernel.org>,
	"linux-arm-kernel@lists.infradead.org"
	<linux-arm-kernel@lists.infradead.org>
Subject: [PATCH v2 3/3] ARM: dts: imx7-colibri: add support for Toradex Aster carrier board
Date: Wed, 19 Feb 2020 13:00:54 +0000	[thread overview]
Message-ID: <20200219130043.3563238-4-oleksandr.suvorov@toradex.com> (raw)
In-Reply-To: <20200219130043.3563238-1-oleksandr.suvorov@toradex.com>

Add support for the Toradex Aster carrier board.

Follow the usual hierarchic include model, maintaining shared
configuration imx7-colibri-aster.dtsi.

Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
---

Changes in v2:
- Change X11 license to MIT
- Sort nodes alphabetically
- Document compatibles for an Aster board in the separate commit of
  the series
- Drop the undocumented device (spidev-around work will be sent in
  the separate patchset)

 arch/arm/boot/dts/Makefile                    |   3 +
 arch/arm/boot/dts/imx7-colibri-aster.dtsi     | 169 ++++++++++++++++++
 arch/arm/boot/dts/imx7-colibri.dtsi           |   2 -
 arch/arm/boot/dts/imx7d-colibri-aster.dts     |  20 +++
 .../arm/boot/dts/imx7d-colibri-emmc-aster.dts |  20 +++
 arch/arm/boot/dts/imx7s-colibri-aster.dts     |  15 ++
 6 files changed, 227 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/boot/dts/imx7-colibri-aster.dtsi
 create mode 100644 arch/arm/boot/dts/imx7d-colibri-aster.dts
 create mode 100644 arch/arm/boot/dts/imx7d-colibri-emmc-aster.dts
 create mode 100644 arch/arm/boot/dts/imx7s-colibri-aster.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 732933318a61..bceeafccf1cf 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -610,6 +610,8 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
 	imx6ulz-14x14-evk.dtb
 dtb-$(CONFIG_SOC_IMX7D) += \
 	imx7d-cl-som-imx7.dtb \
+	imx7d-colibri-aster.dtb \
+	imx7d-colibri-emmc-aster.dtb \
 	imx7d-colibri-emmc-eval-v3.dtb \
 	imx7d-colibri-eval-v3.dtb \
 	imx7d-mba7.dtb \
@@ -623,6 +625,7 @@ dtb-$(CONFIG_SOC_IMX7D) += \
 	imx7d-sdb-sht11.dtb \
 	imx7d-zii-rmu2.dtb \
 	imx7d-zii-rpu2.dtb \
+	imx7s-colibri-aster.dtb \
 	imx7s-colibri-eval-v3.dtb \
 	imx7s-mba7.dtb \
 	imx7s-warp.dtb
diff --git a/arch/arm/boot/dts/imx7-colibri-aster.dtsi b/arch/arm/boot/dts/imx7-colibri-aster.dtsi
new file mode 100644
index 000000000000..9fa701bec2ec
--- /dev/null
+++ b/arch/arm/boot/dts/imx7-colibri-aster.dtsi
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2017-2020 Toradex AG
+ *
+ */
+
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiokeys>;
+
+		power {
+			label = "Wake-Up";
+			gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	panel: panel {
+		compatible = "edt,et057090dhu";
+		backlight = <&bl>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lcdif_out>;
+			};
+		};
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh_reg>;
+		regulator-name = "VCC_USB[1-4]";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 7 GPIO_ACTIVE_LOW>;
+		vin-supply = <&reg_5v0>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+};
+
+/*
+ * ADC2 is not available on the Aster board and
+ * conflicts with AD7879 resistive touchscreen.
+ */
+&adc2 {
+	status = "disabled";
+};
+
+&bl {
+	brightness-levels = <0 4 8 16 32 64 128 255>;
+	default-brightness-level = <6>;
+	power-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&fec1 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	/* Microchip/Atmel maxtouch controller */
+	touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiotouch>;
+		reg = <0x4a>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;	/* SODIMM 107 */
+		reset-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;	/* SODIMM 106 */
+	};
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc: m41t0m6@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	pinctrl_gpiotouch: touchgpios {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA15__GPIO2_IO15        0x74
+			MX7D_PAD_EPDC_BDR0__GPIO2_IO28          0x14
+		>;
+	};
+};
+
+&lcdif {
+	status = "okay";
+
+	port {
+		lcdif_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbotg1 {
+	status = "okay";
+};
+
+&usdhc1 {
+	keep-power-in-suspend;
+	no-1-8-v;
+	wakeup-source;
+	vmmc-supply = <&reg_3v3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index e078487a1347..973fe5715e96 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -499,7 +499,6 @@ MX7D_PAD_LCD_RESET__GPIO3_IO4		0x14 /* SODIMM 93 */
 			MX7D_PAD_EPDC_DATA13__GPIO2_IO13	0x14 /* SODIMM 95 */
 			MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11	0x14 /* SODIMM 99 */
 			MX7D_PAD_EPDC_DATA10__GPIO2_IO10	0x74 /* SODIMM 105 */
-			MX7D_PAD_EPDC_DATA15__GPIO2_IO15	0x74 /* SODIMM 107 */
 			MX7D_PAD_EPDC_DATA00__GPIO2_IO0		0x14 /* SODIMM 111 */
 			MX7D_PAD_EPDC_DATA01__GPIO2_IO1		0x14 /* SODIMM 113 */
 			MX7D_PAD_EPDC_DATA02__GPIO2_IO2		0x14 /* SODIMM 115 */
@@ -516,7 +515,6 @@ MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17	0x14 /* SODIMM 24 */
 			MX7D_PAD_SD2_DATA2__GPIO5_IO16		0x14 /* SODIMM 100 */
 			MX7D_PAD_SD2_DATA3__GPIO5_IO17		0x14 /* SODIMM 102 */
 			MX7D_PAD_EPDC_GDSP__GPIO2_IO27		0x14 /* SODIMM 104 */
-			MX7D_PAD_EPDC_BDR0__GPIO2_IO28		0x74 /* SODIMM 106 */
 			MX7D_PAD_EPDC_BDR1__GPIO2_IO29		0x14 /* SODIMM 110 */
 			MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30	0x14 /* SODIMM 112 */
 			MX7D_PAD_EPDC_SDCLK__GPIO2_IO16		0x14 /* SODIMM 114 */
diff --git a/arch/arm/boot/dts/imx7d-colibri-aster.dts b/arch/arm/boot/dts/imx7d-colibri-aster.dts
new file mode 100644
index 000000000000..f3f0537d5a37
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-colibri-aster.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2017-2020 Toradex AG
+ *
+ */
+
+/dts-v1/;
+#include "imx7d-colibri.dtsi"
+#include "imx7-colibri-aster.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7D on Aster Carrier Board";
+	compatible = "toradex,colibri-imx7d-aster", "toradex,colibri-imx7d",
+		     "fsl,imx7d";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usbh_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx7d-colibri-emmc-aster.dts b/arch/arm/boot/dts/imx7d-colibri-emmc-aster.dts
new file mode 100644
index 000000000000..20480276cb0e
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-colibri-emmc-aster.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2017-2020 Toradex AG
+ *
+ */
+
+/dts-v1/;
+#include "imx7d-colibri-emmc.dtsi"
+#include "imx7-colibri-aster.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7D 1GB (eMMC) on Aster Carrier Board";
+	compatible = "toradex,colibri-imx7d-emmc-aster",
+		     "toradex,colibri-imx7d-emmc", "fsl,imx7d";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usbh_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx7s-colibri-aster.dts b/arch/arm/boot/dts/imx7s-colibri-aster.dts
new file mode 100644
index 000000000000..fca4e0a95c1b
--- /dev/null
+++ b/arch/arm/boot/dts/imx7s-colibri-aster.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2017-2020 Toradex AG
+ *
+ */
+
+/dts-v1/;
+#include "imx7s-colibri.dtsi"
+#include "imx7-colibri-aster.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7S on Aster Carrier Board";
+	compatible = "toradex,colibri-imx7s-aster", "toradex,colibri-imx7s",
+		     "fsl,imx7s";
+};
-- 
2.24.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2020-02-19 13:01 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-19 13:00 [PATCH v2 0/3] Add Aster carrier board support for Colibri iMX7 CoM Oleksandr Suvorov
2020-02-19 13:00 ` [PATCH v2 1/3] ARM: dts: imx7-colibri: Convert to SPDX license tags for Colibri iMX7 Oleksandr Suvorov
2020-02-19 13:00 ` Oleksandr Suvorov [this message]
2020-02-24  6:23 ` [PATCH v2 0/3] Add Aster carrier board support for Colibri iMX7 CoM Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200219130043.3563238-4-oleksandr.suvorov@toradex.com \
    --to=oleksandr.suvorov@toradex.com \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=igor.opanyuk@toradex.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marcel.ziswiler@toradex.com \
    --cc=mark.rutland@arm.com \
    --cc=philippe.schenker@toradex.com \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox