From: Russell King - ARM Linux admin <linux@armlinux.org.uk>
To: Andre Przywara <andre.przywara@arm.com>
Cc: Andrew Lunn <andrew@lunn.ch>,
Florian Fainelli <f.fainelli@gmail.com>,
netdev@vger.kernel.org,
Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>,
Michal Simek <michal.simek@xilinx.com>,
"David S. Miller" <davem@davemloft.net>,
linux-arm-kernel@lists.infradead.org,
Heiner Kallweit <hkallweit1@gmail.com>
Subject: Re: [CFT 4/8] net: axienet: use resolved link config in mac_link_up()
Date: Thu, 20 Feb 2020 10:29:27 +0000 [thread overview]
Message-ID: <20200220102927.GX25745@shell.armlinux.org.uk> (raw)
In-Reply-To: <E1j3k7t-00072J-RS@rmk-PC.armlinux.org.uk>
Hi Andre,
Are you able to give this (along with patch 1) some testing please?
The series can be grabbed from:
https://patchwork.ozlabs.org/series/159037/mbox/
Strangely, google doesn't find it in the lore.kernel.org archives,
but does in spinics.net archives and patchwork...
On Mon, Feb 17, 2020 at 05:24:09PM +0000, Russell King wrote:
> Convert the Xilinx AXI ethernet driver to use the finalised link
> parameters in mac_link_up() rather than the parameters in mac_config().
>
> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
> ---
> .../net/ethernet/xilinx/xilinx_axienet_main.c | 38 +++++++++----------
> 1 file changed, 19 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
> index 197740781157..c2f4c5ca2e80 100644
> --- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
> +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
> @@ -1440,6 +1440,22 @@ static void axienet_mac_an_restart(struct phylink_config *config)
>
> static void axienet_mac_config(struct phylink_config *config, unsigned int mode,
> const struct phylink_link_state *state)
> +{
> + /* nothing meaningful to do */
> +}
> +
> +static void axienet_mac_link_down(struct phylink_config *config,
> + unsigned int mode,
> + phy_interface_t interface)
> +{
> + /* nothing meaningful to do */
> +}
> +
> +static void axienet_mac_link_up(struct phylink_config *config,
> + struct phy_device *phy,
> + unsigned int mode, phy_interface_t interface,
> + int speed, int duplex,
> + bool tx_pause, bool rx_pause)
> {
> struct net_device *ndev = to_net_dev(config->dev);
> struct axienet_local *lp = netdev_priv(ndev);
> @@ -1448,7 +1464,7 @@ static void axienet_mac_config(struct phylink_config *config, unsigned int mode,
> emmc_reg = axienet_ior(lp, XAE_EMMC_OFFSET);
> emmc_reg &= ~XAE_EMMC_LINKSPEED_MASK;
>
> - switch (state->speed) {
> + switch (speed) {
> case SPEED_1000:
> emmc_reg |= XAE_EMMC_LINKSPD_1000;
> break;
> @@ -1467,33 +1483,17 @@ static void axienet_mac_config(struct phylink_config *config, unsigned int mode,
> axienet_iow(lp, XAE_EMMC_OFFSET, emmc_reg);
>
> fcc_reg = axienet_ior(lp, XAE_FCC_OFFSET);
> - if (state->pause & MLO_PAUSE_TX)
> + if (tx_pause)
> fcc_reg |= XAE_FCC_FCTX_MASK;
> else
> fcc_reg &= ~XAE_FCC_FCTX_MASK;
> - if (state->pause & MLO_PAUSE_RX)
> + if (rx_pause)
> fcc_reg |= XAE_FCC_FCRX_MASK;
> else
> fcc_reg &= ~XAE_FCC_FCRX_MASK;
> axienet_iow(lp, XAE_FCC_OFFSET, fcc_reg);
> }
>
> -static void axienet_mac_link_down(struct phylink_config *config,
> - unsigned int mode,
> - phy_interface_t interface)
> -{
> - /* nothing meaningful to do */
> -}
> -
> -static void axienet_mac_link_up(struct phylink_config *config,
> - struct phy_device *phy,
> - unsigned int mode, phy_interface_t interface,
> - int speed, int duplex,
> - bool tx_pause, bool rx_pause)
> -{
> - /* nothing meaningful to do */
> -}
> -
> static const struct phylink_mac_ops axienet_phylink_ops = {
> .validate = axienet_validate,
> .mac_pcs_get_state = axienet_mac_pcs_get_state,
> --
> 2.20.1
>
>
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up
According to speedtest.net: 11.9Mbps down 500kbps up
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-02-20 10:31 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-17 17:22 [CFT 0/8] rework phylink interface for split MAC/PCS support Russell King - ARM Linux admin
2020-02-17 17:33 ` Andrew Lunn
2020-02-17 18:51 ` Russell King - ARM Linux admin
2020-02-18 10:29 ` Russell King - ARM Linux admin
[not found] ` <E1j3k7e-00071q-3R@rmk-PC.armlinux.org.uk>
2020-02-17 18:03 ` [CFT 1/8] net: phylink: propagate resolved link config via mac_link_up() Matthew Wilcox
2020-02-17 18:48 ` Russell King - ARM Linux admin
2020-02-17 21:54 ` Florian Fainelli
2020-02-18 1:53 ` Russell King - ARM Linux admin
[not found] ` <E1j3k7t-00072J-RS@rmk-PC.armlinux.org.uk>
2020-02-20 10:29 ` Russell King - ARM Linux admin [this message]
2020-02-24 12:24 ` [CFT 4/8] net: axienet: use resolved link config in mac_link_up() Andre Przywara
2020-02-24 13:01 ` Russell King - ARM Linux admin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200220102927.GX25745@shell.armlinux.org.uk \
--to=linux@armlinux.org.uk \
--cc=andre.przywara@arm.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=hkallweit1@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=michal.simek@xilinx.com \
--cc=netdev@vger.kernel.org \
--cc=radhey.shyam.pandey@xilinx.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).