From: Shawn Guo <shawnguo@kernel.org>
To: soc@kernel.org, arm@kernel.org
Cc: Stefan Agner <stefan@agner.ch>, Li Yang <leoyang.li@nxp.com>,
linux-imx@nxp.com, kernel@pengutronix.de,
Fabio Estevam <festevam@gmail.com>,
linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL] i.MX fixes for 5.6
Date: Mon, 24 Feb 2020 20:03:35 +0800 [thread overview]
Message-ID: <20200224120334.GH27688@dragon> (raw)
The following changes since commit bb6d3fb354c5ee8d6bde2d576eb7220ea09862b9:
Linux 5.6-rc1 (2020-02-09 16:08:48 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-fixes-5.6
for you to fetch changes up to f10e58a5d20e1cf3a39a842da92c9dd0c3c23849:
soc: imx-scu: Align imx sc msg structs to 4 (2020-02-24 15:29:43 +0800)
----------------------------------------------------------------
i.MX fixes for 5.6:
- Build v7_cpu_resume() unconditionally to fix system hang in case that
suspend is disabled but cpuidle support is enabled.
- Drop unexisting Ethernet PHY device from imx8qxp-mek board.
- Fix SRAM compatible strings on imx6dl-colibri-eval-v3 board.
- Fix imx-scu driver to make sure that all messages words are written
sequentially.
- A series from Leonard Crestez to fix i.MX SC API users, having all
messages aligned on 4 bytes.
- Fix eMMC supply for phycore-som board.
- Drop bogus frequency setting from imx7-colibri SD/MMC device, so that
HS200 mode starts working and delivers better performance.
- Fix opp-supported-hw for i.MX7D to get consumer and industrial parts
work with correct frequency settings.
- Restore MDIO compatible to the correct one for LS1021A SoC.
----------------------------------------------------------------
Ahmad Fatoum (1):
ARM: imx: build v7_cpu_resume() unconditionally
Fabio Estevam (1):
arm64: dts: imx8qxp-mek: Remove unexisting Ethernet PHY
Johan Hovold (1):
ARM: dts: imx6dl-colibri-eval-v3: fix sram compatible properties
Leonard Crestez (5):
firmware: imx: scu: Ensure sequential TX
firmware: imx: misc: Align imx sc msg structs to 4
firmware: imx: scu-pd: Align imx sc msg structs to 4
firmware: imx: Align imx_sc_msg_req_cpu_start to 4
soc: imx-scu: Align imx sc msg structs to 4
Marco Felsch (1):
ARM: dts: imx6: phycore-som: fix emmc supply
Oleksandr Suvorov (1):
ARM: dts: imx7-colibri: Fix frequency for sd/mmc
Peng Fan (1):
ARM: dts: imx7d: fix opp-supported-hw
Vladimir Oltean (1):
ARM: dts: ls1021a: Restore MDIO compatible to gianfar
arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts | 4 ++--
arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi | 1 -
arch/arm/boot/dts/imx7-colibri.dtsi | 1 -
arch/arm/boot/dts/imx7d.dtsi | 6 ++---
arch/arm/boot/dts/ls1021a.dtsi | 4 ++--
arch/arm/mach-imx/Makefile | 2 ++
arch/arm/mach-imx/common.h | 4 ++--
arch/arm/mach-imx/resume-imx6.S | 24 ++++++++++++++++++++
arch/arm/mach-imx/suspend-imx6.S | 14 ------------
arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 5 -----
drivers/firmware/imx/imx-scu.c | 27 +++++++++++++++++++++++
drivers/firmware/imx/misc.c | 8 +++----
drivers/firmware/imx/scu-pd.c | 2 +-
drivers/soc/imx/soc-imx-scu.c | 2 +-
14 files changed, 68 insertions(+), 36 deletions(-)
create mode 100644 arch/arm/mach-imx/resume-imx6.S
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
reply other threads:[~2020-02-24 12:03 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200224120334.GH27688@dragon \
--to=shawnguo@kernel.org \
--cc=arm@kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=soc@kernel.org \
--cc=stefan@agner.ch \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).