[PATCH v3] ARM: ep93xx: Replace setup_irq() by request_irq()

[afzal mohammed <afzal.mohd.ma@gmail.com>]

request_irq() is preferred over setup_irq(). Invocations of setup_irq()
occur after memory allocators are ready.

Per tglx[1], setup_irq() existed in olden days when allocators were not
ready by the time early interrupts were initialized.

Hence replace setup_irq() by request_irq().

[1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos

Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
---
Hi sub-arch maintainers,

If the patch is okay, please take it thr' your tree.

Regards
afzal

v3:
 * Split out from series, also create subarch level patch as Thomas
	suggested to take it thr' respective maintainers
 * Modify string displayed in case of error as suggested by Thomas
 * Re-arrange code as required to improve readability
 * Remove irrelevant parts from commit message & improve
 
v2:
 * Replace pr_err("request_irq() on %s failed" by
           pr_err("%s: request_irq() failed"
 * Commit message massage

 arch/arm/mach-ep93xx/timer-ep93xx.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/arch/arm/mach-ep93xx/timer-ep93xx.c b/arch/arm/mach-ep93xx/timer-ep93xx.c
index de998830f534..dd4b164d1831 100644
--- a/arch/arm/mach-ep93xx/timer-ep93xx.c
+++ b/arch/arm/mach-ep93xx/timer-ep93xx.c
@@ -117,15 +117,11 @@ static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction ep93xx_timer_irq = {
-	.name		= "ep93xx timer",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= ep93xx_timer_interrupt,
-	.dev_id		= &ep93xx_clockevent,
-};
-
 void __init ep93xx_timer_init(void)
 {
+	int irq = IRQ_EP93XX_TIMER3;
+	unsigned long flags = IRQF_TIMER | IRQF_IRQPOLL;
+
 	/* Enable and register clocksource and sched_clock on timer 4 */
 	writel(EP93XX_TIMER4_VALUE_HIGH_ENABLE,
 	       EP93XX_TIMER4_VALUE_HIGH);
@@ -136,7 +132,9 @@ void __init ep93xx_timer_init(void)
 			     EP93XX_TIMER4_RATE);
 
 	/* Set up clockevent on timer 3 */
-	setup_irq(IRQ_EP93XX_TIMER3, &ep93xx_timer_irq);
+	if (request_irq(irq, ep93xx_timer_interrupt, flags, "ep93xx timer",
+			&ep93xx_clockevent))
+		pr_err("Failed to request irq %d (ep93xx timer)\n", irq);
 	clockevents_config_and_register(&ep93xx_clockevent,
 					EP93XX_TIMER123_RATE,
 					1,
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel