[PATCH v3] ARM: orion: replace setup_irq() by request_irq()

From: afzal mohammed <afzal.mohd.ma@gmail.com>
To: Viresh Kumar <viresh.kumar@linaro.org>,
	Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
	Gregory Clement <gregory.clement@bootlin.com>,
	Russell King <linux@armlinux.org.uk>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Cc: afzal mohammed <afzal.mohd.ma@gmail.com>
Subject: [PATCH v3] ARM: orion: replace setup_irq() by request_irq()
Date: Sun,  1 Mar 2020 17:53:30 +0530	[thread overview]
Message-ID: <20200301122330.4296-1-afzal.mohd.ma@gmail.com> (raw)

request_irq() is preferred over setup_irq(). Invocations of setup_irq()
occur after memory allocators are ready.

Per tglx[1], setup_irq() existed in olden days when allocators were not
ready by the time early interrupts were initialized.

Hence replace setup_irq() by request_irq().

[1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos

Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
---
Hi sub-arch maintainers,

If the patch is okay, please take it thr' your tree.

Regards
afzal

v3:
 * Split out from series, also split out from ARM patch to subarch level
	as Thomas suggested to take it thr' respective maintainers
 * Modify string displayed in case of error as suggested by Thomas
 * Re-arrange code as required to improve readability
 * Remove irrelevant parts from commit message & improve
 
v2:
 * Replace pr_err("request_irq() on %s failed" by
           pr_err("%s: request_irq() failed"
 * Commit message massage

 arch/arm/plat-orion/time.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c
index ffb93db68e9c..509d4824dc1c 100644
--- a/arch/arm/plat-orion/time.c
+++ b/arch/arm/plat-orion/time.c
@@ -177,12 +177,6 @@ static irqreturn_t orion_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction orion_timer_irq = {
-	.name		= "orion_tick",
-	.flags		= IRQF_TIMER,
-	.handler	= orion_timer_interrupt
-};
-
 void __init
 orion_time_set_base(void __iomem *_timer_base)
 {
@@ -236,7 +230,9 @@ orion_time_init(void __iomem *_bridge_base, u32 _bridge_timer1_clr_mask,
 	/*
 	 * Setup clockevent timer (interrupt-driven).
 	 */
-	setup_irq(irq, &orion_timer_irq);
+	if (request_irq(irq, orion_timer_interrupt, IRQF_TIMER, "orion_tick",
+			NULL))
+		pr_err("Failed to request irq %u (orion_tick)\n", irq);
 	orion_clkevt.cpumask = cpumask_of(0);
 	clockevents_config_and_register(&orion_clkevt, tclk, 1, 0xfffffffe);
 }
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
