From: Corentin Labbe <clabbe.montjoie@gmail.com>
To: Robin Murphy <robin.murphy@arm.com>
Cc: mark.rutland@arm.com, lorenzo.pieralisi@arm.com, maz@kernel.org,
linux-kernel@vger.kernel.org, mripard@kernel.org,
linux@armlinux.org.uk, wens@csie.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: sunxi: a83t: does not boot anymore in BigEndian
Date: Tue, 3 Mar 2020 15:21:04 +0100 [thread overview]
Message-ID: <20200303142104.GA8327@Red> (raw)
In-Reply-To: <65498b8e-a6c3-9edb-873f-6c011582a2eb@arm.com>
On Tue, Mar 03, 2020 at 01:47:02PM +0000, Robin Murphy wrote:
> On 03/03/2020 7:43 am, Corentin Labbe wrote:
> > Hello
> >
> > My sun8i-a83t-bananapi-m3 does not boot anymore in BE.
> > Others sunxi platform I have seems not affected (a10, a20, a64, h3, h5, h6)
> >
> > I have bisected this problem:
> > git bisect start
> > # bad: [98d54f81e36ba3bf92172791eba5ca5bd813989b] Linux 5.6-rc4
> > git bisect bad 98d54f81e36ba3bf92172791eba5ca5bd813989b
> > # bad: [d5226fa6dbae0569ee43ecfc08bdcd6770fc4755] Linux 5.5
> > git bisect bad d5226fa6dbae0569ee43ecfc08bdcd6770fc4755
> > # good: [219d54332a09e8d8741c1e1982f5eae56099de85] Linux 5.4
> > git bisect good 219d54332a09e8d8741c1e1982f5eae56099de85
> > # bad: [8c39f71ee2019e77ee14f88b1321b2348db51820] Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
> > git bisect bad 8c39f71ee2019e77ee14f88b1321b2348db51820
> > # bad: [3b397c7ccafe0624018cb09fc96729f8f6165573] Merge tag 'regmap-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
> > git bisect bad 3b397c7ccafe0624018cb09fc96729f8f6165573
> > # good: [924ea58dadea23cc28b60d02b9c0896b7b168a6f] Merge tag 'mt76-for-kvalo-2019-11-20' of https://github.com/nbd168/wireless
> > git bisect good 924ea58dadea23cc28b60d02b9c0896b7b168a6f
> > # good: [3f3c8be973af10875cfa1e7b85a535b6ba76b44f] Merge tag 'for-linus-5.5a-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
> > git bisect good 3f3c8be973af10875cfa1e7b85a535b6ba76b44f
> > # bad: [642356cb5f4a8c82b5ca5ebac288c327d10df236] Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
> > git bisect bad 642356cb5f4a8c82b5ca5ebac288c327d10df236
> > # good: [57d8154f15e89f53dfb412f4ed32ebe3c3d755a0] crypto: atmel-aes - Change data type for "lastc" buffer
> > git bisect good 57d8154f15e89f53dfb412f4ed32ebe3c3d755a0
> > # bad: [752272f16dd18f2cac58a583a8673c8e2fb93abb] Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
> > git bisect bad 752272f16dd18f2cac58a583a8673c8e2fb93abb
> > # good: [9477f4449b0b011ce1d058c09ec450bfcdaab784] KVM: VMX: Add helper to check reserved bits in IA32_PERF_GLOBAL_CTRL
> > git bisect good 9477f4449b0b011ce1d058c09ec450bfcdaab784
> > # bad: [cd7056ae34af0e9424da97bbc7d2b38246ba8a2c] Merge remote-tracking branch 'kvmarm/misc-5.5' into kvmarm/next
> > git bisect bad cd7056ae34af0e9424da97bbc7d2b38246ba8a2c
> > # bad: [c7892db5dd6afe921ead502aff7440a1e450d947] KVM: arm64: Select TASK_DELAY_ACCT+TASKSTATS rather than SCHEDSTATS
> > git bisect bad c7892db5dd6afe921ead502aff7440a1e450d947
> > # bad: [8564d6372a7d8a6d440441b8ed8020f97f744450] KVM: arm64: Support stolen time reporting via shared structure
> > git bisect bad 8564d6372a7d8a6d440441b8ed8020f97f744450
> > # bad: [55009c6ed2d24fc0f5521ab2482f145d269389ea] KVM: arm/arm64: Factor out hypercall handling from PSCI code
> > git bisect bad 55009c6ed2d24fc0f5521ab2482f145d269389ea
> > # bad: [6a7458485b390f48e481fcd4a0b20e6c5c843d2e] KVM: arm64: Document PV-time interface
> > git bisect bad 6a7458485b390f48e481fcd4a0b20e6c5c843d2e
> > # bad: [dcac930e9901d765234bc15004db4f7d4416db71] Merge remote-tracking branch 'arm64/for-next/smccc-conduit-cleanup' into kvm-arm64/stolen-time
> > git bisect bad dcac930e9901d765234bc15004db4f7d4416db71
> > # first bad commit: [dcac930e9901d765234bc15004db4f7d4416db71] Merge remote-tracking branch 'arm64/for-next/smccc-conduit-cleanup' into kvm-arm64/stolen-time
> >
> > But bisect lead to a merge request.
>
> FWIW once you've bisected to a merge commit, you can always then try
> bisecting down the merged branch itself (i.e. between 5.4-rc3 and
> e6ea46511b1a in this case) to narrow things down further.
>
> Given that that branch is supposed to be a functionally-inert cleanup,
> and (judging by the DTS) this platform apparently isn't using PSCI
> anyway, it does seem a bit odd. Can you get any earlycon/earlyprintk
> output to suggest what the actual cause of the boot failure is?
>
Hello
With earlycon I got:
bootz 0x42000000 0x43300000 0x43000000
## Loading init Ramdisk from Legacy Image at 43300000 ...
Image Name:
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 32397255 Bytes = 30.9 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 43000000
Booting using the fdt blob at 0x43000000
Using Device Tree in place at 43000000, end 43008f07
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 5.6.0-rc4 (compile@Red) (gcc version 8.3.0 (Gentoo 8.3.0-r1 p1.1)) #21 SMP Tue Mar 3 15:07:20 CET 2020
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=12c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Banana Pi BPI-M3
[ 0.000000] earlycon: uart0 at MMIO32 0x01c28000 (options '')
[ 0.000000] printk: bootconsole [uart0] enabled
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] cma: Reserved 16 MiB at 0xbf000000
[ 0.000000] percpu: Embedded 15 pages/cpu s31320 r8192 d21928 u61440
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522752
[ 0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/ram0 earlycon=uart,mmio32,0x01c28000 ip=dhcp
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 2019352K/2097152K available (7168K kernel code, 485K rwdata, 2832K rodata, 1024K init, 248K bss, 61416K reserved, 16384K cma-reserved, 1294336K highmem)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] random: get_random_bytes called from start_kernel+0x2a4/0x440 with crng_init=0
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000008] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.008636] Switching to timer-based delay loop, resolution 41ns
[ 0.015439] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[ 0.025876] Console: colour dummy device 80x30
[ 0.030743] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[ 0.041927] pid_max: default: 32768 minimum: 301
[ 0.047093] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.055003] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.064553] CPU: Testing write buffer coherency: ok
[ 0.070534] /cpus/cpu@0 missing clock-frequency property
[ 0.076282] /cpus/cpu@1 missing clock-frequency property
[ 0.082071] /cpus/cpu@2 missing clock-frequency property
[ 0.087816] /cpus/cpu@3 missing clock-frequency property
[ 0.093560] /cpus/cpu@100 missing clock-frequency property
[ 0.099498] /cpus/cpu@101 missing clock-frequency property
[ 0.105441] /cpus/cpu@102 missing clock-frequency property
[ 0.111363] /cpus/cpu@103 missing clock-frequency property
[ 0.117292] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.124164] Setting up static identity map for 0x40100000 - 0x40100060
[ 0.131496] ARM CCI driver probed
[ 0.135832] sunxi multi cluster SMP support installed
[ 0.141784] rcu: Hierarchical SRCU implementation.
[ 0.147537] smp: Bringing up secondary CPUs ...
I will try to redo the bisect
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-03-03 14:21 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-03 7:43 sunxi: a83t: does not boot anymore in BigEndian Corentin Labbe
2020-03-03 13:47 ` Robin Murphy
2020-03-03 14:21 ` Corentin Labbe [this message]
2020-03-03 17:50 ` Robin Murphy
2020-03-06 14:45 ` Corentin Labbe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200303142104.GA8327@Red \
--to=clabbe.montjoie@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=lorenzo.pieralisi@arm.com \
--cc=mark.rutland@arm.com \
--cc=maz@kernel.org \
--cc=mripard@kernel.org \
--cc=robin.murphy@arm.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).