[PATCHv3 5/5] clk: samsung: exynos542x: Move FSYS subsystem clocks to its sub-CMU

From: Anand Moon <linux.amoon@gmail.com>
To: linux-usb@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-clk@vger.kernel.org
Cc: Felipe Balbi <balbi@kernel.org>,
	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
	Stephen Boyd <sboyd@kernel.org>,
	Michael Turquette <mturquette@baylibre.com>,
	Tomasz Figa <tomasz.figa@gmail.com>,
	Krzysztof Kozlowski <krzk@kernel.org>,
	Chanwoo Choi <cw00.choi@samsung.com>,
	Rob Herring <robh+dt@kernel.org>, Kukjin Kim <kgene@kernel.org>,
	Sylwester Nawrocki <s.nawrocki@samsung.com>,
	Marek Szyprowski <m.szyprowski@samsung.com>
Subject: [PATCHv3 5/5] clk: samsung: exynos542x: Move FSYS subsystem clocks to its sub-CMU
Date: Tue, 10 Mar 2020 19:48:54 +0000	[thread overview]
Message-ID: <20200310194854.831-6-linux.amoon@gmail.com> (raw)
In-Reply-To: <20200310194854.831-1-linux.amoon@gmail.com>

FSYS power domain support usbdrd3, pdma and usb2 power gaiting,
hence move FSYS clk setting to sub-CMU block to support power domain
on/off sequences for device nodes.

Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
New patch in the series
---
 drivers/clk/samsung/clk-exynos5420.c | 45 +++++++++++++++++++++-------
 1 file changed, 34 insertions(+), 11 deletions(-)

diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c
index c9e5a1fb6653..6c4c47dfcdce 100644
--- a/drivers/clk/samsung/clk-exynos5420.c
+++ b/drivers/clk/samsung/clk-exynos5420.c
@@ -859,12 +859,6 @@ static const struct samsung_div_clock exynos5x_div_clks[] __initconst = {
 	DIV(0, "dout_maudio0", "mout_maudio0", DIV_MAU, 20, 4),
 	DIV(0, "dout_maupcm0", "dout_maudio0", DIV_MAU, 24, 8),
 
-	/* USB3.0 */
-	DIV(0, "dout_usbphy301", "mout_usbd301", DIV_FSYS0, 12, 4),
-	DIV(0, "dout_usbphy300", "mout_usbd300", DIV_FSYS0, 16, 4),
-	DIV(0, "dout_usbd301", "mout_usbd301", DIV_FSYS0, 20, 4),
-	DIV(0, "dout_usbd300", "mout_usbd300", DIV_FSYS0, 24, 4),
-
 	/* MMC */
 	DIV(0, "dout_mmc0", "mout_mmc0", DIV_FSYS1, 0, 10),
 	DIV(0, "dout_mmc1", "mout_mmc1", DIV_FSYS1, 10, 10),
@@ -1031,8 +1025,6 @@ static const struct samsung_gate_clock exynos5x_gate_clks[] __initconst = {
 
 	/* FSYS Block */
 	GATE(CLK_TSI, "tsi", "aclk200_fsys", GATE_BUS_FSYS0, 0, 0, 0),
-	GATE(CLK_PDMA0, "pdma0", "aclk200_fsys", GATE_BUS_FSYS0, 1, 0, 0),
-	GATE(CLK_PDMA1, "pdma1", "aclk200_fsys", GATE_BUS_FSYS0, 2, 0, 0),
 	GATE(CLK_UFS, "ufs", "aclk200_fsys2", GATE_BUS_FSYS0, 3, 0, 0),
 	GATE(CLK_RTIC, "rtic", "aclk200_fsys", GATE_IP_FSYS, 9, 0, 0),
 	GATE(CLK_MMC0, "mmc0", "aclk200_fsys2", GATE_IP_FSYS, 12, 0, 0),
@@ -1040,9 +1032,6 @@ static const struct samsung_gate_clock exynos5x_gate_clks[] __initconst = {
 	GATE(CLK_MMC2, "mmc2", "aclk200_fsys2", GATE_IP_FSYS, 14, 0, 0),
 	GATE(CLK_SROMC, "sromc", "aclk200_fsys2",
 			GATE_IP_FSYS, 17, CLK_IGNORE_UNUSED, 0),
-	GATE(CLK_USBH20, "usbh20", "aclk200_fsys", GATE_IP_FSYS, 18, 0, 0),
-	GATE(CLK_USBD300, "usbd300", "aclk200_fsys", GATE_IP_FSYS, 19, 0, 0),
-	GATE(CLK_USBD301, "usbd301", "aclk200_fsys", GATE_IP_FSYS, 20, 0, 0),
 	GATE(CLK_SCLK_UNIPRO, "sclk_unipro", "dout_unipro",
 			SRC_MASK_FSYS, 24, CLK_SET_RATE_PARENT, 0),
 
@@ -1258,6 +1247,28 @@ static struct exynos5_subcmu_reg_dump exynos5x_gsc_suspend_regs[] = {
 	{ DIV2_RATIO0, 0, 0x30 },	/* DIV dout_gscl_blk_300 */
 };
 
+/* USB3.0 */
+static const struct samsung_div_clock exynos5x_fsys_div_clks[] __initconst = {
+	DIV(0, "dout_usbphy301", "mout_usbd301", DIV_FSYS0, 12, 4),
+	DIV(0, "dout_usbphy300", "mout_usbd300", DIV_FSYS0, 16, 4),
+	DIV(0, "dout_usbd301", "mout_usbd301", DIV_FSYS0, 20, 4),
+	DIV(0, "dout_usbd300", "mout_usbd300", DIV_FSYS0, 24, 4),
+};
+
+static const struct samsung_gate_clock exynos5x_fsys_gate_clks[] __initconst = {
+	GATE(CLK_PDMA0, "pdma0", "aclk200_fsys", GATE_BUS_FSYS0, 1, 0, 0),
+	GATE(CLK_PDMA1, "pdma1", "aclk200_fsys", GATE_BUS_FSYS0, 2, 0, 0),
+	GATE(CLK_USBH20, "usbh20", "aclk200_fsys", GATE_IP_FSYS, 18, 0, 0),
+	GATE(CLK_USBD300, "usbd300", "aclk200_fsys", GATE_IP_FSYS, 19, 0, 0),
+	GATE(CLK_USBD301, "usbd301", "aclk200_fsys", GATE_IP_FSYS, 20, 0, 0),
+};
+
+static struct exynos5_subcmu_reg_dump exynos5x_fsys_suspend_regs[] = {
+	{ GATE_IP_FSYS, 0xffffffff, 0xffffffff }, /* FSYS gates */
+	{ SRC_TOP3, 0, BIT(24) },                 /* SW_MUX_PCLK_200_FSYS_SEL */
+	{ SRC_TOP3, 0, BIT(28) },                 /* SW_MUX_ACLK_200_FSYS_SEL */
+};
+
 static const struct samsung_gate_clock exynos5x_g3d_gate_clks[] __initconst = {
 	GATE(CLK_G3D, "g3d", "mout_user_aclk_g3d", GATE_IP_G3D, 9,
 	     CLK_SET_RATE_PARENT, 0),
@@ -1376,12 +1387,23 @@ static const struct exynos5_subcmu_info exynos5800_mau_subcmu = {
 	.pd_name	= "MAU",
 };
 
+static const struct exynos5_subcmu_info exynos5x_fsys_subcmu = {
+	.div_clks       = exynos5x_fsys_div_clks,
+	.nr_div_clks    = ARRAY_SIZE(exynos5x_fsys_div_clks),
+	.gate_clks	= exynos5x_fsys_gate_clks,
+	.nr_gate_clks	= ARRAY_SIZE(exynos5x_fsys_gate_clks),
+	.suspend_regs	= exynos5x_fsys_suspend_regs,
+	.nr_suspend_regs = ARRAY_SIZE(exynos5x_fsys_suspend_regs),
+	.pd_name	= "FSYS",
+};
+
 static const struct exynos5_subcmu_info *exynos5x_subcmus[] = {
 	&exynos5x_disp_subcmu,
 	&exynos5x_gsc_subcmu,
 	&exynos5x_g3d_subcmu,
 	&exynos5x_mfc_subcmu,
 	&exynos5x_mscl_subcmu,
+	&exynos5x_fsys_subcmu,
 };
 
 static const struct exynos5_subcmu_info *exynos5800_subcmus[] = {
@@ -1391,6 +1413,7 @@ static const struct exynos5_subcmu_info *exynos5800_subcmus[] = {
 	&exynos5x_mfc_subcmu,
 	&exynos5x_mscl_subcmu,
 	&exynos5800_mau_subcmu,
+	&exynos5x_fsys_subcmu,
 };
 
 static const struct samsung_pll_rate_table exynos5420_pll2550x_24mhz_tbl[] __initconst = {
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
