From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Sasha Levin <sashal@kernel.org>,
alsa-devel@alsa-project.org,
Olivier Moysan <olivier.moysan@st.com>,
Mark Brown <broonie@kernel.org>,
linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH AUTOSEL 5.5 29/41] ASoC: stm32: sai: manage rebind issue
Date: Sun, 15 Mar 2020 22:33:07 -0400 [thread overview]
Message-ID: <20200316023319.749-29-sashal@kernel.org> (raw)
In-Reply-To: <20200316023319.749-1-sashal@kernel.org>
From: Olivier Moysan <olivier.moysan@st.com>
[ Upstream commit 0d6defc7e0e437a9fd53622f7fd85740f38d5693 ]
The commit e894efef9ac7 ("ASoC: core: add support to card rebind")
allows to rebind the sound card after a rebind of one of its component.
With this commit, the sound card is actually rebound,
but may be no more functional. The following problems have been seen
with STM32 SAI driver.
1) DMA channel is not requested:
With the sound card rebind the simplified call sequence is:
stm32_sai_sub_probe
snd_soc_register_component
snd_soc_try_rebind_card
snd_soc_instantiate_card
devm_snd_dmaengine_pcm_register
The problem occurs because the pcm must be registered,
before snd_soc_instantiate_card() is called.
Modify SAI driver, to change the call sequence as follows:
stm32_sai_sub_probe
devm_snd_dmaengine_pcm_register
snd_soc_register_component
snd_soc_try_rebind_card
2) DMA channel is not released:
dma_release_channel() is not called when
devm_dmaengine_pcm_release() is executed.
This occurs because SND_DMAENGINE_PCM_DRV_NAME component,
has already been released through devm_component_release().
devm_dmaengine_pcm_release() should be called before
devm_component_release() to avoid this problem.
Call snd_dmaengine_pcm_unregister() and snd_soc_unregister_component()
explicitly from SAI driver, to have the right sequence.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Message-Id: <20200304102406.8093-1-olivier.moysan@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/stm/stm32_sai_sub.c | 18 ++++++++++--------
1 file changed, 10 insertions(+), 8 deletions(-)
diff --git a/sound/soc/stm/stm32_sai_sub.c b/sound/soc/stm/stm32_sai_sub.c
index 30bcd5d3a32a8..10eb4b8e8e7ee 100644
--- a/sound/soc/stm/stm32_sai_sub.c
+++ b/sound/soc/stm/stm32_sai_sub.c
@@ -1543,20 +1543,20 @@ static int stm32_sai_sub_probe(struct platform_device *pdev)
return ret;
}
- ret = devm_snd_soc_register_component(&pdev->dev, &stm32_component,
- &sai->cpu_dai_drv, 1);
+ ret = snd_dmaengine_pcm_register(&pdev->dev, conf, 0);
+ if (ret) {
+ dev_err(&pdev->dev, "Could not register pcm dma\n");
+ return ret;
+ }
+
+ ret = snd_soc_register_component(&pdev->dev, &stm32_component,
+ &sai->cpu_dai_drv, 1);
if (ret)
return ret;
if (STM_SAI_PROTOCOL_IS_SPDIF(sai))
conf = &stm32_sai_pcm_config_spdif;
- ret = devm_snd_dmaengine_pcm_register(&pdev->dev, conf, 0);
- if (ret) {
- dev_err(&pdev->dev, "Could not register pcm dma\n");
- return ret;
- }
-
return 0;
}
@@ -1565,6 +1565,8 @@ static int stm32_sai_sub_remove(struct platform_device *pdev)
struct stm32_sai_sub_data *sai = dev_get_drvdata(&pdev->dev);
clk_unprepare(sai->pdata->pclk);
+ snd_dmaengine_pcm_unregister(&pdev->dev);
+ snd_soc_unregister_component(&pdev->dev);
return 0;
}
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
prev parent reply other threads:[~2020-03-16 2:38 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20200316023319.749-1-sashal@kernel.org>
2020-03-16 2:32 ` [PATCH AUTOSEL 5.5 03/41] drm/mediatek: Find the cursor plane instead of hard coding it Sasha Levin
2020-03-16 2:32 ` [PATCH AUTOSEL 5.5 04/41] drm/mediatek: Ensure the cursor plane is on top of other overlays Sasha Levin
2020-03-16 2:32 ` [PATCH AUTOSEL 5.5 05/41] ARM: dts: imx6dl-colibri-eval-v3: fix sram compatible properties Sasha Levin
2020-03-16 7:21 ` Johan Hovold
2020-03-22 12:54 ` Sasha Levin
2020-03-16 2:32 ` [PATCH AUTOSEL 5.5 09/41] ASoC: meson: g12a: add tohdmitx reset Sasha Levin
2020-03-16 2:32 ` [PATCH AUTOSEL 5.5 15/41] spi: pxa2xx: Add CS control clock quirk Sasha Levin
2020-03-16 2:32 ` [PATCH AUTOSEL 5.5 16/41] spi/zynqmp: remove entry that causes a cs glitch Sasha Levin
2020-03-16 2:32 ` [PATCH AUTOSEL 5.5 17/41] ARM: dts: bcm283x: Add missing properties to the PWR LED Sasha Levin
2020-03-16 2:32 ` [PATCH AUTOSEL 5.5 18/41] drm/exynos: dsi: propagate error value and silence meaningless warning Sasha Levin
2020-03-16 2:32 ` [PATCH AUTOSEL 5.5 19/41] drm/exynos: dsi: fix workaround for the legacy clock name Sasha Levin
2020-03-16 2:32 ` [PATCH AUTOSEL 5.5 20/41] drm/exynos: hdmi: don't leak enable HDMI_EN regulator if probe fails Sasha Levin
2020-03-16 2:32 ` [PATCH AUTOSEL 5.5 21/41] drivers/perf: fsl_imx8_ddr: Correct the CLEAR bit definition Sasha Levin
2020-03-16 2:33 ` [PATCH AUTOSEL 5.5 22/41] drivers/perf: arm_pmu_acpi: Fix incorrect checking of gicc pointer Sasha Levin
2020-03-16 2:33 ` [PATCH AUTOSEL 5.5 24/41] ARM: bcm2835_defconfig: Explicitly restore CONFIG_DEBUG_FS Sasha Levin
2020-03-16 2:33 ` Sasha Levin [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200316023319.749-29-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=olivier.moysan@st.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).