[PATCH AUTOSEL 5.4 03/35] drm/mediatek: Find the cursor plane instead of hard coding it

[PATCH AUTOSEL 5.4 03/35] drm/mediatek: Find the cursor plane instead of hard coding it

[Sasha Levin]

From: Evan Benn <evanbenn@chromium.org>

[ Upstream commit 318caac7c81cdf5806df30c3d72385659a5f0f53 ]

The cursor and primary planes were hard coded.
Now search for them for passing to drm_crtc_init_with_planes

Signed-off-by: Evan Benn <evanbenn@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index e6c049f4f08bb..f9455f2724d23 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -496,10 +496,18 @@ static const struct drm_crtc_helper_funcs mtk_crtc_helper_funcs = {
 
 static int mtk_drm_crtc_init(struct drm_device *drm,
 			     struct mtk_drm_crtc *mtk_crtc,
-			     struct drm_plane *primary,
-			     struct drm_plane *cursor, unsigned int pipe)
+			     unsigned int pipe)
 {
-	int ret;
+	struct drm_plane *primary = NULL;
+	struct drm_plane *cursor = NULL;
+	int i, ret;
+
+	for (i = 0; i < mtk_crtc->layer_nr; i++) {
+		if (mtk_crtc->planes[i].type == DRM_PLANE_TYPE_PRIMARY)
+			primary = &mtk_crtc->planes[i];
+		else if (mtk_crtc->planes[i].type == DRM_PLANE_TYPE_CURSOR)
+			cursor = &mtk_crtc->planes[i];
+	}
 
 	ret = drm_crtc_init_with_planes(drm, &mtk_crtc->base, primary, cursor,
 					&mtk_crtc_funcs, NULL);
@@ -608,9 +616,7 @@ int mtk_drm_crtc_create(struct drm_device *drm_dev,
 			return ret;
 	}
 
-	ret = mtk_drm_crtc_init(drm_dev, mtk_crtc, &mtk_crtc->planes[0],
-				mtk_crtc->layer_nr > 1 ? &mtk_crtc->planes[1] :
-				NULL, pipe);
+	ret = mtk_drm_crtc_init(drm_dev, mtk_crtc, pipe);
 	if (ret < 0)
 		return ret;
 
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 04/35] ARM: dts: imx6dl-colibri-eval-v3: fix sram compatible properties

[Sasha Levin]

From: Johan Hovold <johan@kernel.org>

[ Upstream commit bcbf53a0dab50980867476994f6079c1ec5bb3a3 ]

The sram-node compatible properties have mistakingly combined the
model-specific string with the generic "mtd-ram" string.

Note that neither "cy7c1019dv33-10zsxi, mtd-ram" or
"cy7c1019dv33-10zsxi" are used by any in-kernel driver and they are
not present in any binding.

The physmap driver will however bind to platform devices that specify
"mtd-ram".

Fixes: fc48e76489fd ("ARM: dts: imx6: Add support for Toradex Colibri iMX6 module")
Cc: Sanchayan Maity <maitysanchayan@gmail.com>
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
index 9a5d6c94cca4d..40d750fccf6d6 100644
--- a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
@@ -236,7 +236,7 @@
 
 	/* SRAM on Colibri nEXT_CS0 */
 	sram@0,0 {
-		compatible = "cypress,cy7c1019dv33-10zsxi, mtd-ram";
+		compatible = "cypress,cy7c1019dv33-10zsxi", "mtd-ram";
 		reg = <0 0 0x00010000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -247,7 +247,7 @@
 
 	/* SRAM on Colibri nEXT_CS1 */
 	sram@1,0 {
-		compatible = "cypress,cy7c1019dv33-10zsxi, mtd-ram";
+		compatible = "cypress,cy7c1019dv33-10zsxi", "mtd-ram";
 		reg = <1 0 0x00010000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 08/35] ASoC: meson: g12a: add tohdmitx reset

[Sasha Levin]

From: Jerome Brunet <jbrunet@baylibre.com>

[ Upstream commit 22946f37557e27697aabc8e4f62642bfe4a17fd8 ]

Reset the g12a hdmi codec glue on probe. This ensure a sane startup state.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200221121146.1498427-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/meson/g12a-tohdmitx.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/sound/soc/meson/g12a-tohdmitx.c b/sound/soc/meson/g12a-tohdmitx.c
index 9cfbd343a00c8..8a0db28a6a406 100644
--- a/sound/soc/meson/g12a-tohdmitx.c
+++ b/sound/soc/meson/g12a-tohdmitx.c
@@ -8,6 +8,7 @@
 #include <linux/module.h>
 #include <sound/pcm_params.h>
 #include <linux/regmap.h>
+#include <linux/reset.h>
 #include <sound/soc.h>
 #include <sound/soc-dai.h>
 
@@ -378,6 +379,11 @@ static int g12a_tohdmitx_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	void __iomem *regs;
 	struct regmap *map;
+	int ret;
+
+	ret = device_reset(dev);
+	if (ret)
+		return ret;
 
 	regs = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(regs))
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH AUTOSEL 5.4 08/35] ASoC: meson: g12a: add tohdmitx reset

[Jerome Brunet]

On Mon 16 Mar 2020 at 03:33, Sasha Levin <sashal@kernel.org> wrote:

> From: Jerome Brunet <jbrunet@baylibre.com>
>
> [ Upstream commit 22946f37557e27697aabc8e4f62642bfe4a17fd8 ]
>
> Reset the g12a hdmi codec glue on probe. This ensure a sane startup state.
>
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
> Link: https://lore.kernel.org/r/20200221121146.1498427-1-jbrunet@baylibre.com
> Signed-off-by: Mark Brown <broonie@kernel.org>
> Signed-off-by: Sasha Levin <sashal@kernel.org>

Hi Sasha,

The tohdmitx reset property is not in the amlogic g12a DT in v5.4.
Backporting this patch on v5.4 would break the hdmi sound, and probably
the related sound card since the reset is not optional.

Could you please drop this from v5.4 stable ?
It is ok to keep it for v5.5.

Thanks
Jerome

> ---
>  sound/soc/meson/g12a-tohdmitx.c | 6 ++++++
>  1 file changed, 6 insertions(+)
>
> diff --git a/sound/soc/meson/g12a-tohdmitx.c b/sound/soc/meson/g12a-tohdmitx.c
> index 9cfbd343a00c8..8a0db28a6a406 100644
> --- a/sound/soc/meson/g12a-tohdmitx.c
> +++ b/sound/soc/meson/g12a-tohdmitx.c
> @@ -8,6 +8,7 @@
>  #include <linux/module.h>
>  #include <sound/pcm_params.h>
>  #include <linux/regmap.h>
> +#include <linux/reset.h>
>  #include <sound/soc.h>
>  #include <sound/soc-dai.h>
>  
> @@ -378,6 +379,11 @@ static int g12a_tohdmitx_probe(struct platform_device *pdev)
>  	struct device *dev = &pdev->dev;
>  	void __iomem *regs;
>  	struct regmap *map;
> +	int ret;
> +
> +	ret = device_reset(dev);
> +	if (ret)
> +		return ret;
>  
>  	regs = devm_platform_ioremap_resource(pdev, 0);
>  	if (IS_ERR(regs))


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH AUTOSEL 5.4 08/35] ASoC: meson: g12a: add tohdmitx reset

[Jerome Brunet]

On Mon 16 Mar 2020 at 09:28, Jerome Brunet <jbrunet@baylibre.com> wrote:

> On Mon 16 Mar 2020 at 03:33, Sasha Levin <sashal@kernel.org> wrote:
>
>> From: Jerome Brunet <jbrunet@baylibre.com>
>>
>> [ Upstream commit 22946f37557e27697aabc8e4f62642bfe4a17fd8 ]
>>
>> Reset the g12a hdmi codec glue on probe. This ensure a sane startup state.
>>
>> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
>> Link: https://lore.kernel.org/r/20200221121146.1498427-1-jbrunet@baylibre.com
>> Signed-off-by: Mark Brown <broonie@kernel.org>
>> Signed-off-by: Sasha Levin <sashal@kernel.org>
>
> Hi Sasha,
>
> The tohdmitx reset property is not in the amlogic g12a DT in v5.4.
> Backporting this patch on v5.4 would break the hdmi sound, and probably
> the related sound card since the reset is not optional.
>
> Could you please drop this from v5.4 stable ?

Hi Sasha,

I just received a notification that this patch has been applied to 5.4
stable.

As explained above, it will cause a regression.
Could you please drop it from v5.4 stable ?

Thanks
Jerome

> It is ok to keep it for v5.5.
>
> Thanks
> Jerome
>
>> ---
>>  sound/soc/meson/g12a-tohdmitx.c | 6 ++++++
>>  1 file changed, 6 insertions(+)
>>
>> diff --git a/sound/soc/meson/g12a-tohdmitx.c b/sound/soc/meson/g12a-tohdmitx.c
>> index 9cfbd343a00c8..8a0db28a6a406 100644
>> --- a/sound/soc/meson/g12a-tohdmitx.c
>> +++ b/sound/soc/meson/g12a-tohdmitx.c
>> @@ -8,6 +8,7 @@
>>  #include <linux/module.h>
>>  #include <sound/pcm_params.h>
>>  #include <linux/regmap.h>
>> +#include <linux/reset.h>
>>  #include <sound/soc.h>
>>  #include <sound/soc-dai.h>
>>  
>> @@ -378,6 +379,11 @@ static int g12a_tohdmitx_probe(struct platform_device *pdev)
>>  	struct device *dev = &pdev->dev;
>>  	void __iomem *regs;
>>  	struct regmap *map;
>> +	int ret;
>> +
>> +	ret = device_reset(dev);
>> +	if (ret)
>> +		return ret;
>>  
>>  	regs = devm_platform_ioremap_resource(pdev, 0);
>>  	if (IS_ERR(regs))


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH AUTOSEL 5.4 08/35] ASoC: meson: g12a: add tohdmitx reset

[Sasha Levin]

On Sun, Mar 22, 2020 at 07:31:31PM +0100, Jerome Brunet wrote:
>
>On Mon 16 Mar 2020 at 09:28, Jerome Brunet <jbrunet@baylibre.com> wrote:
>
>> On Mon 16 Mar 2020 at 03:33, Sasha Levin <sashal@kernel.org> wrote:
>>
>>> From: Jerome Brunet <jbrunet@baylibre.com>
>>>
>>> [ Upstream commit 22946f37557e27697aabc8e4f62642bfe4a17fd8 ]
>>>
>>> Reset the g12a hdmi codec glue on probe. This ensure a sane startup state.
>>>
>>> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
>>> Link: https://lore.kernel.org/r/20200221121146.1498427-1-jbrunet@baylibre.com
>>> Signed-off-by: Mark Brown <broonie@kernel.org>
>>> Signed-off-by: Sasha Levin <sashal@kernel.org>
>>
>> Hi Sasha,
>>
>> The tohdmitx reset property is not in the amlogic g12a DT in v5.4.
>> Backporting this patch on v5.4 would break the hdmi sound, and probably
>> the related sound card since the reset is not optional.
>>
>> Could you please drop this from v5.4 stable ?
>
>Hi Sasha,
>
>I just received a notification that this patch has been applied to 5.4
>stable.
>
>As explained above, it will cause a regression.
>Could you please drop it from v5.4 stable ?

Hi Jerome,

Sorry - I've missed your previous mail. Now dropped from all trees.

-- 
Thanks,
Sasha

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 14/35] spi: pxa2xx: Add CS control clock quirk

[Sasha Levin]

From: Evan Green <evgreen@chromium.org>

[ Upstream commit 683f65ded66a9a7ff01ed7280804d2132ebfdf7e ]

In some circumstances on Intel LPSS controllers, toggling the LPSS
CS control register doesn't actually cause the CS line to toggle.
This seems to be failure of dynamic clock gating that occurs after
going through a suspend/resume transition, where the controller
is sent through a reset transition. This ruins SPI transactions
that either rely on delay_usecs, or toggle the CS line without
sending data.

Whenever CS is toggled, momentarily set the clock gating register
to "Force On" to poke the controller into acting on CS.

Signed-off-by: Rajat Jain <rajatja@google.com>
Signed-off-by: Evan Green <evgreen@chromium.org>
Link: https://lore.kernel.org/r/20200211223700.110252-1-rajatja@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-pxa2xx.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index 2fd843b18297d..7231456732068 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -68,6 +68,10 @@ MODULE_ALIAS("platform:pxa2xx-spi");
 #define LPSS_CAPS_CS_EN_SHIFT			9
 #define LPSS_CAPS_CS_EN_MASK			(0xf << LPSS_CAPS_CS_EN_SHIFT)
 
+#define LPSS_PRIV_CLOCK_GATE 0x38
+#define LPSS_PRIV_CLOCK_GATE_CLK_CTL_MASK 0x3
+#define LPSS_PRIV_CLOCK_GATE_CLK_CTL_FORCE_ON 0x3
+
 struct lpss_config {
 	/* LPSS offset from drv_data->ioaddr */
 	unsigned offset;
@@ -84,6 +88,8 @@ struct lpss_config {
 	unsigned cs_sel_shift;
 	unsigned cs_sel_mask;
 	unsigned cs_num;
+	/* Quirks */
+	unsigned cs_clk_stays_gated : 1;
 };
 
 /* Keep these sorted with enum pxa_ssp_type */
@@ -154,6 +160,7 @@ static const struct lpss_config lpss_platforms[] = {
 		.tx_threshold_hi = 56,
 		.cs_sel_shift = 8,
 		.cs_sel_mask = 3 << 8,
+		.cs_clk_stays_gated = true,
 	},
 };
 
@@ -381,6 +388,22 @@ static void lpss_ssp_cs_control(struct spi_device *spi, bool enable)
 	else
 		value |= LPSS_CS_CONTROL_CS_HIGH;
 	__lpss_ssp_write_priv(drv_data, config->reg_cs_ctrl, value);
+	if (config->cs_clk_stays_gated) {
+		u32 clkgate;
+
+		/*
+		 * Changing CS alone when dynamic clock gating is on won't
+		 * actually flip CS at that time. This ruins SPI transfers
+		 * that specify delays, or have no data. Toggle the clock mode
+		 * to force on briefly to poke the CS pin to move.
+		 */
+		clkgate = __lpss_ssp_read_priv(drv_data, LPSS_PRIV_CLOCK_GATE);
+		value = (clkgate & ~LPSS_PRIV_CLOCK_GATE_CLK_CTL_MASK) |
+			LPSS_PRIV_CLOCK_GATE_CLK_CTL_FORCE_ON;
+
+		__lpss_ssp_write_priv(drv_data, LPSS_PRIV_CLOCK_GATE, value);
+		__lpss_ssp_write_priv(drv_data, LPSS_PRIV_CLOCK_GATE, clkgate);
+	}
 }
 
 static void cs_assert(struct spi_device *spi)
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 15/35] spi/zynqmp: remove entry that causes a cs glitch

[Sasha Levin]

From: Thommy Jakobsson <thommyj@gmail.com>

[ Upstream commit 5dd8304981ecffa77bb72b1c57c4be5dfe6cfae9 ]

In the public interface for chipselect, there is always an entry
commented as "Dummy generic FIFO entry" pushed down to the fifo right
after the activate/deactivate command. The dummy entry is 0x0,
irregardless if the intention was to activate or deactive the cs. This
causes the cs line to glitch rather than beeing activated in the case
when there was an activate command.

This has been observed on oscilloscope, and have caused problems for at
least one specific flash device type connected to the qspi port. After
the change the glitch is gone and cs goes active when intended.

The reason why this worked before (except for the glitch) was because
when sending the actual data, the CS bits are once again set. Since
most flashes uses mode 0, there is always a half clk period anyway for
cs to clk active setup time. If someone would rely on timing from a
chip_select call to a transfer_one, it would fail though.

It is unknown why the dummy entry was there in the first place, git log
seems to be of no help in this case. The reference manual gives no
indication of the necessity of this. In fact the lower 8 bits are a
setup (or hold in case of deactivate) time expressed in cycles. So this
should not be needed to fulfill any setup/hold timings.

Signed-off-by: Thommy Jakobsson <thommyj@gmail.com>
Reviewed-by: Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com>
Link: https://lore.kernel.org/r/20200224162643.29102-1-thommyj@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-zynqmp-gqspi.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/spi/spi-zynqmp-gqspi.c b/drivers/spi/spi-zynqmp-gqspi.c
index 60c4de4e44856..7412a3042a8d2 100644
--- a/drivers/spi/spi-zynqmp-gqspi.c
+++ b/drivers/spi/spi-zynqmp-gqspi.c
@@ -401,9 +401,6 @@ static void zynqmp_qspi_chipselect(struct spi_device *qspi, bool is_high)
 
 	zynqmp_gqspi_write(xqspi, GQSPI_GEN_FIFO_OFST, genfifoentry);
 
-	/* Dummy generic FIFO entry */
-	zynqmp_gqspi_write(xqspi, GQSPI_GEN_FIFO_OFST, 0x0);
-
 	/* Manually start the generic FIFO command */
 	zynqmp_gqspi_write(xqspi, GQSPI_CONFIG_OFST,
 			zynqmp_gqspi_read(xqspi, GQSPI_CONFIG_OFST) |
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 16/35] drm/exynos: dsi: propagate error value and silence meaningless warning

[Sasha Levin]

From: Marek Szyprowski <m.szyprowski@samsung.com>

[ Upstream commit 0a9d1e3f3f038785ebc72d53f1c409d07f6b4ff5 ]

Properly propagate error value from devm_regulator_bulk_get() and don't
confuse user with meaningless warning about failure in getting regulators
in case of deferred probe.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/exynos/exynos_drm_dsi.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index 6926cee91b367..2767408c4750e 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -1750,8 +1750,9 @@ static int exynos_dsi_probe(struct platform_device *pdev)
 	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(dsi->supplies),
 				      dsi->supplies);
 	if (ret) {
-		dev_info(dev, "failed to get regulators: %d\n", ret);
-		return -EPROBE_DEFER;
+		if (ret != -EPROBE_DEFER)
+			dev_info(dev, "failed to get regulators: %d\n", ret);
+		return ret;
 	}
 
 	dsi->clks = devm_kcalloc(dev,
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 17/35] drm/exynos: dsi: fix workaround for the legacy clock name

[Sasha Levin]

From: Marek Szyprowski <m.szyprowski@samsung.com>

[ Upstream commit c0fd99d659ba5582e09625c7a985d63fc2ca74b5 ]

Writing to the built-in strings arrays doesn't work if driver is loaded
as kernel module. This is also considered as a bad pattern. Fix this by
adding a call to clk_get() with legacy clock name. This fixes following
kernel oops if driver is loaded as module:

Unable to handle kernel paging request at virtual address bf047978
 pgd = (ptrval)
 [bf047978] *pgd=59344811, *pte=5903c6df, *ppte=5903c65f
 Internal error: Oops: 80f [#1] SMP ARM
 Modules linked in: mc exynosdrm(+) analogix_dp rtc_s3c exynos_ppmu i2c_gpio
 CPU: 1 PID: 212 Comm: systemd-udevd Not tainted 5.6.0-rc2-next-20200219 #326
 videodev: Linux video capture interface: v2.00
 Hardware name: Samsung Exynos (Flattened Device Tree)
 PC is at exynos_dsi_probe+0x1f0/0x384 [exynosdrm]
 LR is at exynos_dsi_probe+0x1dc/0x384 [exynosdrm]
 ...
 Process systemd-udevd (pid: 212, stack limit = 0x(ptrval))
 ...
 [<bf03cf14>] (exynos_dsi_probe [exynosdrm]) from [<c09b1ca0>] (platform_drv_probe+0x6c/0xa4)
 [<c09b1ca0>] (platform_drv_probe) from [<c09afcb8>] (really_probe+0x210/0x350)
 [<c09afcb8>] (really_probe) from [<c09aff74>] (driver_probe_device+0x60/0x1a0)
 [<c09aff74>] (driver_probe_device) from [<c09b0254>] (device_driver_attach+0x58/0x60)
 [<c09b0254>] (device_driver_attach) from [<c09b02dc>] (__driver_attach+0x80/0xbc)
 [<c09b02dc>] (__driver_attach) from [<c09ade00>] (bus_for_each_dev+0x68/0xb4)
 [<c09ade00>] (bus_for_each_dev) from [<c09aefd8>] (bus_add_driver+0x130/0x1e8)
 [<c09aefd8>] (bus_add_driver) from [<c09b0d64>] (driver_register+0x78/0x110)
 [<c09b0d64>] (driver_register) from [<bf038558>] (exynos_drm_init+0xe8/0x11c [exynosdrm])
 [<bf038558>] (exynos_drm_init [exynosdrm]) from [<c0302fa8>] (do_one_initcall+0x50/0x220)
 [<c0302fa8>] (do_one_initcall) from [<c03dd02c>] (do_init_module+0x60/0x210)
 [<c03dd02c>] (do_init_module) from [<c03dbf44>] (load_module+0x1c0c/0x2310)
 [<c03dbf44>] (load_module) from [<c03dc85c>] (sys_finit_module+0xac/0xbc)
 [<c03dc85c>] (sys_finit_module) from [<c0301000>] (ret_fast_syscall+0x0/0x54)
 Exception stack(0xd979bfa8 to 0xd979bff0)
 ...
 ---[ end trace db16efe05faab470 ]---

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/exynos/exynos_drm_dsi.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index 2767408c4750e..8ed94c9948008 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -1765,9 +1765,10 @@ static int exynos_dsi_probe(struct platform_device *pdev)
 		dsi->clks[i] = devm_clk_get(dev, clk_names[i]);
 		if (IS_ERR(dsi->clks[i])) {
 			if (strcmp(clk_names[i], "sclk_mipi") == 0) {
-				strcpy(clk_names[i], OLD_SCLK_MIPI_CLK_NAME);
-				i--;
-				continue;
+				dsi->clks[i] = devm_clk_get(dev,
+							OLD_SCLK_MIPI_CLK_NAME);
+				if (!IS_ERR(dsi->clks[i]))
+					continue;
 			}
 
 			dev_info(dev, "failed to get the clock: %s\n",
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 18/35] drm/exynos: hdmi: don't leak enable HDMI_EN regulator if probe fails

[Sasha Levin]

From: Marek Szyprowski <m.szyprowski@samsung.com>

[ Upstream commit 3b6a9b19ab652efac7ad4c392add6f1235019568 ]

Move enabling and disabling HDMI_EN optional regulator to probe() function
to keep track on the regulator status. This fixes following warning if
probe() fails (for example when I2C DDC adapter cannot be yet gathered
due to the missing driver). This fixes following warning observed on
Arndale5250 board with multi_v7_defconfig:

[drm] Failed to get ddc i2c adapter by node
------------[ cut here ]------------
WARNING: CPU: 0 PID: 214 at drivers/regulator/core.c:2051 _regulator_put+0x16c/0x184
Modules linked in: ...
CPU: 0 PID: 214 Comm: systemd-udevd Not tainted 5.6.0-rc2-next-20200219-00040-g38af1dfafdbb #7570
Hardware name: Samsung Exynos (Flattened Device Tree)
[<c0312258>] (unwind_backtrace) from [<c030cc10>] (show_stack+0x10/0x14)
[<c030cc10>] (show_stack) from [<c0f0d3a0>] (dump_stack+0xcc/0xe0)
[<c0f0d3a0>] (dump_stack) from [<c0346a58>] (__warn+0xe0/0xf8)
[<c0346a58>] (__warn) from [<c0346b20>] (warn_slowpath_fmt+0xb0/0xb8)
[<c0346b20>] (warn_slowpath_fmt) from [<c0893f58>] (_regulator_put+0x16c/0x184)
[<c0893f58>] (_regulator_put) from [<c0893f8c>] (regulator_put+0x1c/0x2c)
[<c0893f8c>] (regulator_put) from [<c09b2664>] (release_nodes+0x17c/0x200)
[<c09b2664>] (release_nodes) from [<c09aebe8>] (really_probe+0x10c/0x350)
[<c09aebe8>] (really_probe) from [<c09aefa8>] (driver_probe_device+0x60/0x1a0)
[<c09aefa8>] (driver_probe_device) from [<c09af288>] (device_driver_attach+0x58/0x60)
[<c09af288>] (device_driver_attach) from [<c09af310>] (__driver_attach+0x80/0xbc)
[<c09af310>] (__driver_attach) from [<c09ace34>] (bus_for_each_dev+0x68/0xb4)
[<c09ace34>] (bus_for_each_dev) from [<c09ae00c>] (bus_add_driver+0x130/0x1e8)
[<c09ae00c>] (bus_add_driver) from [<c09afd98>] (driver_register+0x78/0x110)
[<c09afd98>] (driver_register) from [<bf139558>] (exynos_drm_init+0xe8/0x11c [exynosdrm])
[<bf139558>] (exynos_drm_init [exynosdrm]) from [<c0302fa8>] (do_one_initcall+0x50/0x220)
[<c0302fa8>] (do_one_initcall) from [<c03dc02c>] (do_init_module+0x60/0x210)
[<c03dc02c>] (do_init_module) from [<c03daf44>] (load_module+0x1c0c/0x2310)
[<c03daf44>] (load_module) from [<c03db85c>] (sys_finit_module+0xac/0xbc)
[<c03db85c>] (sys_finit_module) from [<c0301000>] (ret_fast_syscall+0x0/0x54)
Exception stack(0xecca3fa8 to 0xecca3ff0)
...
---[ end trace 276c91214635905c ]---

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/exynos/exynos_hdmi.c | 22 ++++++++++++----------
 1 file changed, 12 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c
index 09aa73c0f2add..0073a2b3b80a2 100644
--- a/drivers/gpu/drm/exynos/exynos_hdmi.c
+++ b/drivers/gpu/drm/exynos/exynos_hdmi.c
@@ -1802,18 +1802,10 @@ static int hdmi_resources_init(struct hdmi_context *hdata)
 
 	hdata->reg_hdmi_en = devm_regulator_get_optional(dev, "hdmi-en");
 
-	if (PTR_ERR(hdata->reg_hdmi_en) != -ENODEV) {
+	if (PTR_ERR(hdata->reg_hdmi_en) != -ENODEV)
 		if (IS_ERR(hdata->reg_hdmi_en))
 			return PTR_ERR(hdata->reg_hdmi_en);
 
-		ret = regulator_enable(hdata->reg_hdmi_en);
-		if (ret) {
-			DRM_DEV_ERROR(dev,
-				      "failed to enable hdmi-en regulator\n");
-			return ret;
-		}
-	}
-
 	return hdmi_bridge_init(hdata);
 }
 
@@ -2020,6 +2012,15 @@ static int hdmi_probe(struct platform_device *pdev)
 		}
 	}
 
+	if (!IS_ERR(hdata->reg_hdmi_en)) {
+		ret = regulator_enable(hdata->reg_hdmi_en);
+		if (ret) {
+			DRM_DEV_ERROR(dev,
+			      "failed to enable hdmi-en regulator\n");
+			goto err_hdmiphy;
+		}
+	}
+
 	pm_runtime_enable(dev);
 
 	audio_infoframe = &hdata->audio.infoframe;
@@ -2044,7 +2045,8 @@ static int hdmi_probe(struct platform_device *pdev)
 
 err_rpm_disable:
 	pm_runtime_disable(dev);
-
+	if (!IS_ERR(hdata->reg_hdmi_en))
+		regulator_disable(hdata->reg_hdmi_en);
 err_hdmiphy:
 	if (hdata->hdmiphy_port)
 		put_device(&hdata->hdmiphy_port->dev);
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 19/35] drivers/perf: fsl_imx8_ddr: Correct the CLEAR bit definition

[Sasha Levin]

From: Joakim Zhang <qiangqing.zhang@nxp.com>

[ Upstream commit 049d919168458ac54e7fad27cd156a958b042d2f ]

When disabling a counter from ddr_perf_event_stop(), the counter value
is reset to 0 at the same time.

Preserve the counter value by performing a read-modify-write of the
PMU register and clearing only the enable bit.

Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/perf/fsl_imx8_ddr_perf.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/perf/fsl_imx8_ddr_perf.c b/drivers/perf/fsl_imx8_ddr_perf.c
index 0e51baa48b149..6eef47de8fccc 100644
--- a/drivers/perf/fsl_imx8_ddr_perf.c
+++ b/drivers/perf/fsl_imx8_ddr_perf.c
@@ -327,9 +327,10 @@ static void ddr_perf_counter_enable(struct ddr_pmu *pmu, int config,
 
 	if (enable) {
 		/*
-		 * must disable first, then enable again
-		 * otherwise, cycle counter will not work
-		 * if previous state is enabled.
+		 * cycle counter is special which should firstly write 0 then
+		 * write 1 into CLEAR bit to clear it. Other counters only
+		 * need write 0 into CLEAR bit and it turns out to be 1 by
+		 * hardware. Below enable flow is harmless for all counters.
 		 */
 		writel(0, pmu->base + reg);
 		val = CNTL_EN | CNTL_CLEAR;
@@ -337,7 +338,8 @@ static void ddr_perf_counter_enable(struct ddr_pmu *pmu, int config,
 		writel(val, pmu->base + reg);
 	} else {
 		/* Disable counter */
-		writel(0, pmu->base + reg);
+		val = readl_relaxed(pmu->base + reg) & CNTL_EN_MASK;
+		writel(val, pmu->base + reg);
 	}
 }
 
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 20/35] drivers/perf: arm_pmu_acpi: Fix incorrect checking of gicc pointer

[Sasha Levin]

From: luanshi <zhangliguang@linux.alibaba.com>

[ Upstream commit 3ba52ad55b533760a1f65836aa0ec9d35e36bb4f ]

Fix bogus NULL checks on the return value of acpi_cpu_get_madt_gicc()
by checking for a 0 'gicc->performance_interrupt' value instead.

Signed-off-by: Liguang Zhang <zhangliguang@linux.alibaba.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/perf/arm_pmu_acpi.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/drivers/perf/arm_pmu_acpi.c b/drivers/perf/arm_pmu_acpi.c
index acce8781c456c..f5c7a845cd7bf 100644
--- a/drivers/perf/arm_pmu_acpi.c
+++ b/drivers/perf/arm_pmu_acpi.c
@@ -24,8 +24,6 @@ static int arm_pmu_acpi_register_irq(int cpu)
 	int gsi, trigger;
 
 	gicc = acpi_cpu_get_madt_gicc(cpu);
-	if (WARN_ON(!gicc))
-		return -EINVAL;
 
 	gsi = gicc->performance_interrupt;
 
@@ -64,11 +62,10 @@ static void arm_pmu_acpi_unregister_irq(int cpu)
 	int gsi;
 
 	gicc = acpi_cpu_get_madt_gicc(cpu);
-	if (!gicc)
-		return;
 
 	gsi = gicc->performance_interrupt;
-	acpi_unregister_gsi(gsi);
+	if (gsi)
+		acpi_unregister_gsi(gsi);
 }
 
 #if IS_ENABLED(CONFIG_ARM_SPE_PMU)
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 25/35] ASoC: stm32: sai: manage rebind issue

[Sasha Levin]

From: Olivier Moysan <olivier.moysan@st.com>

[ Upstream commit 0d6defc7e0e437a9fd53622f7fd85740f38d5693 ]

The commit e894efef9ac7 ("ASoC: core: add support to card rebind")
allows to rebind the sound card after a rebind of one of its component.
With this commit, the sound card is actually rebound,
but may be no more functional. The following problems have been seen
with STM32 SAI driver.

1) DMA channel is not requested:

With the sound card rebind the simplified call sequence is:
stm32_sai_sub_probe
	snd_soc_register_component
		snd_soc_try_rebind_card
			snd_soc_instantiate_card
	devm_snd_dmaengine_pcm_register

The problem occurs because the pcm must be registered,
before snd_soc_instantiate_card() is called.

Modify SAI driver, to change the call sequence as follows:
stm32_sai_sub_probe
	devm_snd_dmaengine_pcm_register
	snd_soc_register_component
		snd_soc_try_rebind_card

2) DMA channel is not released:

dma_release_channel() is not called when
devm_dmaengine_pcm_release() is executed.
This occurs because SND_DMAENGINE_PCM_DRV_NAME component,
has already been released through devm_component_release().

devm_dmaengine_pcm_release() should be called before
devm_component_release() to avoid this problem.

Call snd_dmaengine_pcm_unregister() and snd_soc_unregister_component()
explicitly from SAI driver, to have the right sequence.

Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Message-Id: <20200304102406.8093-1-olivier.moysan@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/stm/stm32_sai_sub.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

diff --git a/sound/soc/stm/stm32_sai_sub.c b/sound/soc/stm/stm32_sai_sub.c
index 30bcd5d3a32a8..10eb4b8e8e7ee 100644
--- a/sound/soc/stm/stm32_sai_sub.c
+++ b/sound/soc/stm/stm32_sai_sub.c
@@ -1543,20 +1543,20 @@ static int stm32_sai_sub_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	ret = devm_snd_soc_register_component(&pdev->dev, &stm32_component,
-					      &sai->cpu_dai_drv, 1);
+	ret = snd_dmaengine_pcm_register(&pdev->dev, conf, 0);
+	if (ret) {
+		dev_err(&pdev->dev, "Could not register pcm dma\n");
+		return ret;
+	}
+
+	ret = snd_soc_register_component(&pdev->dev, &stm32_component,
+					 &sai->cpu_dai_drv, 1);
 	if (ret)
 		return ret;
 
 	if (STM_SAI_PROTOCOL_IS_SPDIF(sai))
 		conf = &stm32_sai_pcm_config_spdif;
 
-	ret = devm_snd_dmaengine_pcm_register(&pdev->dev, conf, 0);
-	if (ret) {
-		dev_err(&pdev->dev, "Could not register pcm dma\n");
-		return ret;
-	}
-
 	return 0;
 }
 
@@ -1565,6 +1565,8 @@ static int stm32_sai_sub_remove(struct platform_device *pdev)
 	struct stm32_sai_sub_data *sai = dev_get_drvdata(&pdev->dev);
 
 	clk_unprepare(sai->pdata->pclk);
+	snd_dmaengine_pcm_unregister(&pdev->dev);
+	snd_soc_unregister_component(&pdev->dev);
 
 	return 0;
 }
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel