From: Shawn Guo <shawnguo@kernel.org>
To: soc@kernel.org, arm@kernel.org
Cc: Shawn Guo <shawnguo@kernel.org>, Stefan Agner <stefan@agner.ch>,
Li Yang <leoyang.li@nxp.com>,
linux-imx@nxp.com, kernel@pengutronix.de,
Fabio Estevam <festevam@gmail.com>,
linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL 5/6] i.MX arm64 DTS update for 5.7
Date: Wed, 18 Mar 2020 13:19:17 +0800 [thread overview]
Message-ID: <20200318051918.32579-5-shawnguo@kernel.org> (raw)
In-Reply-To: <20200318051918.32579-1-shawnguo@kernel.org>
Hi,
To resolve dependency on new clock, this request is built on the
following commit from clk tree.
16e71d4da799 ("clk: imx8mn: add SNVS clock to clock tree")
I have been asking Stephen to keep it stable. Please consider to pull
for 5.7. Thanks!
Shawn
The following changes since commit 16e71d4da7999ddef87f5ba2274d77da0cab2772:
clk: imx8mn: add SNVS clock to clock tree (2020-02-13 11:08:30 +0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt64-5.7
for you to fetch changes up to 630952e1f816814e2fafbbaecfe90bcfe3e117d3:
arm64: dts: ls1028a: disable the felix switch by default (2020-03-16 16:16:00 +0800)
----------------------------------------------------------------
i.MX arm64 DTS update for 5.7:
- New support for Kontron LS1028A based boards and NXP i.MX8MP EVK.
- Add Ethernet PHY reset GPIO for imx8mm-evk and imx8mq-evk board.
- Add gpio-fan, thermal and Ethernet support for imx8mq-phanbell board.
- Add SNVS clock description to pwrkey device for i.MX8 SoCs.
- A number of updates on librem5-devkit board to add audio, proximity
sensor, lsm9ds1 mount matrix support, and improve WoWWAN, DVFS, SD
devices as well.
- A series of patches from Anson Huang to update i.MX8 EVK boards
for support of I2C PCA6416, thermal, GPIO LED, OPP table etc.
- Add PCIe device nodes for LX2160A and LS1028A SoC.
- Add FSPI deivce support for LX2160A evaluation boards.
- Add EEPROM and LTC3882 regulator support for lx2160a-cex7 board.
- Other small and random updates on LS1028A and i.MX8 support.
----------------------------------------------------------------
Adam Ford (1):
arm64: dts: enable fspi in imx8mm dts
Alifer Moraes (4):
arm64: dts: imx8mq-phanbell: Add support for ethernet
arm64: dts: imx8mm-evk: add phy-reset-gpios for fec1
arm64: dts: imx8mq-evk: add phy-reset-gpios for fec1
arm64: dts: imx8mq-phanbell: Fix Ethernet PHY post-reset duration
André Draszik (2):
arm64: dts: imx8mm: add snvs clock to pwrkey
arm64: dts: imx8mq: add snvs clock to pwrkey
Angus Ainslie (Purism) (7):
arm64: dts: librem5-devkit: add a vbus supply to usb0
arm64: dts: librem5-devkit: add the sgtl5000 i2c audio codec
arm64: dts: librem5-devkit: add the simcom 7100 modem and audio
arm64: dts: librem5-devkit: allow modem to wake the system from suspend
arm64: dts: librem5-devkit: add the regulators for DVFS
arm64: dts: librem5-devkit: allow the redpine card to be removed
arm64: dts: librem5-devkit: increase the VBUS current in the kernel
Anson Huang (16):
arm64: dts: freescale: Add i.MX8MP dtsi support
arm64: dts: freescale: Add i.MX8MP EVK board support
arm64: dts: imx8mp-evk: Add GPIO LED support
arm64: dts: imx8mp: Add system counter timer node
arm64: dts: imx8mn: Adjust 1.2GHz OPP voltage to OD mode
arm64: dts: imx: add i.MX8QXP thermal support
arm64: dts: imx8mq: Align iomuxc node name
arm64: dts: imx8mp: Add src node
arm64: dts: imx8mn-evk: Add i2c3 support
arm64: dts: imx8mn-evk: Enable pca6416 on i2c3 bus
arm64: dts: imx8mp-evk: Add i2c3 support
arm64: dts: imx8mp-evk: Enable pca6416 on i2c3 bus
arm64: dts: imx8mm: Add thermal zone support
arm64: dts: imx8mn: Add CPU thermal zone support
arm64: dts: imx8mn: Add snvs clock to powerkey
arm64: dts: imx8mp: Add snvs clock to powerkey
Claudiu Manoil (2):
arm64: dts: ls1028a: add node for Felix switch
arm64: dts: ls1028a: enable switch PHYs on RDB
Guido Günther (1):
arm64: dts: imx8mq-librem5-devkit: Add proximity sensor
Horia Geantă (2):
arm64: dts: imx8mn: add clock for snvs rtc node
arm64: dts: imx8mp: add crypto node
Hou Zhiqiang (2):
arm64: dts: lx2160a: Add PCIe controller DT nodes
arm64: dts: layerscape: add iommu-map property to pci nodes
Kuldeep Singh (2):
arm64: dts: lx2160ardb: Update FSPI node properties
arm64: dts: lx2160aqds: Add FSPI node properties
Martin Kepplinger (1):
arm64: dts: librem5-devkit: add lsm9ds1 mount matrix
Michael Walle (8):
arm64: dts: freescale: add Kontron sl28 support
arm64: dts: ls1028a: add missing SPI nodes
arm64: dts: ls1028: sl28: explicitly enable network ports
arm64: dts: freescale: sl28: add SPI flash
arm64: dts: ls1028a: sl28: fix on-board EEPROMS
arm64: dts: ls1028a: sl28: expose switch ports in KBox A-230-LS
arm64: dts: ls1028a: sl28: add support for variant 2
arm64: dts: ls1028a: disable the felix switch by default
Peng Fan (4):
arm64: dts: imx8mn: Init rates and parents configs for clocks
arm64: dts: freescale: s32v234: use generic name bus
arm64: dts: imx8mm: drop redundant interrupt-parent
arm64: dts: imx8m: fix aips dts node
Rabeeh Khoury (1):
arm64: dts: lx2160a-cex7: add on-module eeproms
Russell King (1):
arm64: dts: lx2160a-cex7: add support for ltc3882 regulator
Silvano di Ninno (1):
arm64: dts: imx8mn: align name for crypto child nodes
Vitor Massaru Iha (1):
arm64: dts: imx8mq-phanbell: Add gpio-fan/thermal support
Vladimir Oltean (2):
arm64: dts: ls1028a: delete extraneous #interrupt-cells for ENETC RCIE
arm64: dts: ls1028a: disable all enetc ports by default
Xiaowei Bao (1):
arm64: dts: ls1028a: Add PCIe controller DT nodes
Yangbo Lu (2):
arm64: dts: ls1088a: support eMMC HS200 speed mode for RDB board
arm64: dts: ls1028a: support external trigger timestamp fifo of PTP timer
arch/arm64/boot/dts/freescale/Makefile | 6 +
.../fsl-ls1028a-kontron-kbox-a-230-ls.dts | 91 ++
.../freescale/fsl-ls1028a-kontron-sl28-var2.dts | 72 ++
.../fsl-ls1028a-kontron-sl28-var3-ads2.dts | 117 +++
.../freescale/fsl-ls1028a-kontron-sl28-var4.dts | 51 ++
.../dts/freescale/fsl-ls1028a-kontron-sl28.dts | 187 +++++
arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 1 +
arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 65 +-
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 184 +++-
arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 1 +
arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 4 +
arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 4 +
.../arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi | 37 +
arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts | 15 +
arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts | 4 +-
arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 168 ++++
arch/arm64/boot/dts/freescale/imx8mm-evk.dts | 2 +
arch/arm64/boot/dts/freescale/imx8mm.dtsi | 74 +-
arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi | 21 +
arch/arm64/boot/dts/freescale/imx8mn.dtsi | 81 +-
arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 270 ++++++
arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h | 931 +++++++++++++++++++++
arch/arm64/boot/dts/freescale/imx8mp.dtsi | 654 +++++++++++++++
arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 2 +
.../boot/dts/freescale/imx8mq-librem5-devkit.dts | 148 +++-
arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts | 104 +++
arch/arm64/boot/dts/freescale/imx8mq.dtsi | 18 +-
arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 39 +
arch/arm64/boot/dts/freescale/s32v234.dtsi | 4 +-
29 files changed, 3320 insertions(+), 35 deletions(-)
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-evk.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h
create mode 100644 arch/arm64/boot/dts/freescale/imx8mp.dtsi
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-03-18 5:20 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-18 5:19 [GIT PULL 1/6] i.MX drivers update for 5.7 Shawn Guo
2020-03-18 5:19 ` [GIT PULL 2/6] i.MX SoC changes " Shawn Guo
2020-03-18 5:19 ` [GIT PULL 3/6] i.MX DT bindings update " Shawn Guo
2020-03-18 5:19 ` [GIT PULL 4/6] i.MX arm DTS changes " Shawn Guo
2020-03-18 5:19 ` Shawn Guo [this message]
2020-03-18 5:19 ` [GIT PULL 6/6] i.MX defconfig " Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200318051918.32579-5-shawnguo@kernel.org \
--to=shawnguo@kernel.org \
--cc=arm@kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=soc@kernel.org \
--cc=stefan@agner.ch \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).