* [PATCH 1/2] ARM: dts: gemini: Rename IDE nodes
@ 2020-03-20 18:40 Linus Walleij
2020-03-20 18:40 ` [PATCH 2/2] ARM: dts: gemini: Add thermal zone to DIR-685 Linus Walleij
0 siblings, 1 reply; 2+ messages in thread
From: Linus Walleij @ 2020-03-20 18:40 UTC (permalink / raw)
To: linux-arm-kernel; +Cc: Linus Walleij
By renaming the ATA drive nodes to "ide@" we activate the
semantic checks to the DT schema for the controller and use
the correct notation for PATA drives.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
arch/arm/boot/dts/gemini-dlink-dir-685.dts | 2 +-
arch/arm/boot/dts/gemini-dlink-dns-313.dts | 2 +-
arch/arm/boot/dts/gemini-nas4220b.dts | 4 ++--
arch/arm/boot/dts/gemini-sl93512r.dts | 4 ++--
arch/arm/boot/dts/gemini-sq201.dts | 2 +-
arch/arm/boot/dts/gemini.dtsi | 8 ++++++--
6 files changed, 13 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/gemini-dlink-dir-685.dts b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
index e2030ba16512..055b03440bdb 100644
--- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts
+++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
@@ -443,7 +443,7 @@
};
};
- ata@63000000 {
+ ide@63000000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/gemini-dlink-dns-313.dts b/arch/arm/boot/dts/gemini-dlink-dns-313.dts
index 360642a02a48..c6f3d90e3e90 100644
--- a/arch/arm/boot/dts/gemini-dlink-dns-313.dts
+++ b/arch/arm/boot/dts/gemini-dlink-dns-313.dts
@@ -297,7 +297,7 @@
};
};
- ata@63000000 {
+ ide@63000000 {
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/gemini-nas4220b.dts b/arch/arm/boot/dts/gemini-nas4220b.dts
index 521714f38eed..43c45f7e1e0a 100644
--- a/arch/arm/boot/dts/gemini-nas4220b.dts
+++ b/arch/arm/boot/dts/gemini-nas4220b.dts
@@ -170,11 +170,11 @@
};
};
- ata@63000000 {
+ ide@63000000 {
status = "okay";
};
- ata@63400000 {
+ ide@63400000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/gemini-sl93512r.dts b/arch/arm/boot/dts/gemini-sl93512r.dts
index a98af0351906..a0916d3c1059 100644
--- a/arch/arm/boot/dts/gemini-sl93512r.dts
+++ b/arch/arm/boot/dts/gemini-sl93512r.dts
@@ -293,11 +293,11 @@
};
};
- ata@63000000 {
+ ide@63000000 {
status = "okay";
};
- ata@63400000 {
+ ide@63400000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/gemini-sq201.dts b/arch/arm/boot/dts/gemini-sq201.dts
index 239dfacaae4d..0c6e6d35bfaa 100644
--- a/arch/arm/boot/dts/gemini-sq201.dts
+++ b/arch/arm/boot/dts/gemini-sq201.dts
@@ -289,7 +289,7 @@
};
};
- ata@63000000 {
+ ide@63000000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/gemini.dtsi b/arch/arm/boot/dts/gemini.dtsi
index 8cf67b11751f..065ed10a79fa 100644
--- a/arch/arm/boot/dts/gemini.dtsi
+++ b/arch/arm/boot/dts/gemini.dtsi
@@ -356,7 +356,7 @@
};
};
- ata@63000000 {
+ ide@63000000 {
compatible = "cortina,gemini-pata", "faraday,ftide010";
reg = <0x63000000 0x1000>;
interrupts = <4 IRQ_TYPE_EDGE_RISING>;
@@ -365,9 +365,11 @@
clock-names = "PCLK";
sata = <&sata>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
- ata@63400000 {
+ ide@63400000 {
compatible = "cortina,gemini-pata", "faraday,ftide010";
reg = <0x63400000 0x1000>;
interrupts = <5 IRQ_TYPE_EDGE_RISING>;
@@ -376,6 +378,8 @@
clock-names = "PCLK";
sata = <&sata>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
dma-controller@67000000 {
--
2.21.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 2+ messages in thread* [PATCH 2/2] ARM: dts: gemini: Add thermal zone to DIR-685
2020-03-20 18:40 [PATCH 1/2] ARM: dts: gemini: Rename IDE nodes Linus Walleij
@ 2020-03-20 18:40 ` Linus Walleij
0 siblings, 0 replies; 2+ messages in thread
From: Linus Walleij @ 2020-03-20 18:40 UTC (permalink / raw)
To: linux-arm-kernel; +Cc: Linus Walleij
The DIR-685 can now exploit the thermal zone added by the
drive temperature sensor inside the hard drive. We have
patched the libata subsystem to assign the device nodes
properly to the SCSI devices and this is what the drivetemp
driver will use to populate the sensor and the thermal
zone, so pick that up into the thermal zone and let this
control the fan.
The hardware lacks an embedded temperature sensor so the
D-Link vendor firmware uses this method to control the
temperature of the NAS enclosure using the thermal sensor
inside the hard drive.
The drive temperature trigger points to be used comes from
the vendor firmware.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
arch/arm/boot/dts/gemini-dlink-dir-685.dts | 48 ++++++++++++++++++++--
1 file changed, 45 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/gemini-dlink-dir-685.dts b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
index 055b03440bdb..cc39289e99dd 100644
--- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts
+++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
@@ -119,13 +119,11 @@
/*
* This is a Sunon Maglev GM0502PFV2-8 cooling fan @10000 RPM.
- * Since the platform has no temperature sensor, this is controlled
- * from userspace by using the hard disks S.M.A.R.T. temperature
* sensor. It is turned on when the temperature exceeds 46 degrees
* and turned off when the temperatures goes below 41 degrees
* (celsius).
*/
- gpio-fan {
+ fan0: gpio-fan {
compatible = "gpio-fan";
/* Collides with IDE */
gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
@@ -133,6 +131,40 @@
#cooling-cells = <2>;
};
+ thermal-zones {
+ chassis-thermal {
+ /* Poll every 20 seconds */
+ polling-delay = <20000>;
+ /* Poll every 2nd second when cooling */
+ polling-delay-passive = <2000>;
+ /* Use the thermal sensor in the hard drive */
+ thermal-sensors = <&drive0>;
+
+ /* Tripping points from the fan.script in the rootfs */
+ trips {
+ alert: chassis-alert {
+ /* At 43 degrees turn on the fan */
+ temperature = <43000>;
+ hysteresis = <3000>;
+ type = "active";
+ };
+ crit: chassis-crit {
+ /* Just shut down at 60 degrees */
+ temperature = <60000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&alert>;
+ cooling-device = <&fan0 1 1>;
+ };
+ };
+ };
+ };
+
/*
* The touchpad input is connected to a GPIO bit-banged
* I2C bus.
@@ -445,6 +477,16 @@
ide@63000000 {
status = "okay";
+
+ /*
+ * This drive may have a temperature sensor with a
+ * thermal zone we can use for thermal control of the
+ * chassis temperature using the fan.
+ */
+ drive0: ide-port@0 {
+ reg = <0>;
+ #thermal-sensor-cells = <0>;
+ };
};
display-controller@6a000000 {
--
2.21.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-03-20 18:41 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-03-20 18:40 [PATCH 1/2] ARM: dts: gemini: Rename IDE nodes Linus Walleij
2020-03-20 18:40 ` [PATCH 2/2] ARM: dts: gemini: Add thermal zone to DIR-685 Linus Walleij
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).