* [v2] arm64: dts: meson: odroid-n2: extend cpu opp-points
@ 2020-04-18 21:42 Tim Lewis
2020-04-22 14:54 ` Christian Hewitt
0 siblings, 1 reply; 3+ messages in thread
From: Tim Lewis @ 2020-04-18 21:42 UTC (permalink / raw)
To: elatllat
Cc: mark.rutland, devicetree, joy.cho, narmstrong, khilman,
christianshewitt, linux-kernel, robh+dt, tobetter, linux-amlogic,
linux-arm-kernel
Odroid N2 has a large heatsink and HardKernel supports overclock
through the addition to extra opp points in their official kernel
sources [1]. Add these to the N2 dts only, as other S922X devices
may not have suitable heatsinks.
[1] https://github.com/hardkernel/linux/commit/f86cd9487c7483b2a05f448b9ebacf6bd5a2ad2f
Signed-off-by: Tim Lewis <elatllat@gmail.com>
---
.../boot/dts/amlogic/meson-g12b-odroid-n2.dts | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
index 42f154057..6f32ac83f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
@@ -260,6 +260,25 @@
};
};
};
+
+ cpu_opp_table_0: opp-table-0 {
+ opp-1992000000 {
+ opp-hz = /bits/ 64 <1992000000>;
+ opp-microvolt = <1001000>;
+ };
+ };
+
+ cpub_opp_table_1: opp-table-1 {
+ opp-1800000000 {
+ opp-hz = /bits/ 64 <1800000000>;
+ opp-microvolt = <981000>;
+ };
+
+ opp-1908000000 {
+ opp-hz = /bits/ 64 <1908000000>;
+ opp-microvolt = <1022000>;
+ };
+ };
};
&arb {
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 3+ messages in thread* Re: [v2] arm64: dts: meson: odroid-n2: extend cpu opp-points
2020-04-18 21:42 [v2] arm64: dts: meson: odroid-n2: extend cpu opp-points Tim Lewis
@ 2020-04-22 14:54 ` Christian Hewitt
2020-04-22 15:08 ` Neil Armstrong
0 siblings, 1 reply; 3+ messages in thread
From: Christian Hewitt @ 2020-04-22 14:54 UTC (permalink / raw)
To: Tim Lewis
Cc: mark.rutland, devicetree, joy.cho, Neil Armstrong, khilman,
linux-kernel, robh+dt, tobetter, linux-amlogic, linux-arm-kernel
> On 19 Apr 2020, at 1:42 am, Tim Lewis <elatllat@gmail.com> wrote:
>
> Odroid N2 has a large heatsink and HardKernel supports overclock
> through the addition to extra opp points in their official kernel
> sources [1]. Add these to the N2 dts only, as other S922X devices
> may not have suitable heatsinks.
>
> [1] https://github.com/hardkernel/linux/commit/f86cd9487c7483b2a05f448b9ebacf6bd5a2ad2f
> Signed-off-by: Tim Lewis <elatllat@gmail.com>
Kodi is not a demanding workload, but the extra opp points are being used:
N2:~ # cat /sys/devices/system/cpu/cpufreq/policy0/stats/trans_table
From : To
: 100000 250000 500000 667000 1000000 1200000 1398000 1512000 1608000 1704000 1896000 1992000
100000: 0 20465 294 81 47 0 1 0 0 0 0 183
250000: 20388 0 161 52 59 0 0 0 1 0 1 169
500000: 199 256 0 9 47 1 2 0 0 0 0 57
667000: 177 50 10 0 284 1 1 0 0 0 0 136
1000000: 230 12 15 284 0 1 2 0 0 0 0 285
1200000: 0 0 0 1 0 0 0 0 0 1 0 2
1398000: 1 1 0 2 0 0 0 0 1 1 0 3
1512000: 0 0 0 0 0 0 0 0 0 1 0 2
1608000: 0 0 0 0 0 0 0 1 0 0 0 2
1704000: 0 1 0 0 0 0 1 0 0 0 0 2
1896000: 0 0 1 0 0 0 0 0 0 0 0 1
1992000: 76 47 90 230 392 0 2 2 1 1 1 0
N2:~ # cat /sys/devices/system/cpu/cpufreq/policy2/stats/trans_table
From : To
: 100000 250000 500000 667000 1000000 1200000 1398000 1512000 1608000 1704000 1800000 1908000
100000: 0 1698 130 76 87 0 0 0 1 0 1 199
250000: 1655 0 25 15 357 1 2 0 1 0 0 12
500000: 258 54 0 50102 30 3 1 0 0 0 1 32
667000: 267 151 49708 0 77 3 0 0 0 0 0 11
1000000: 3 5 525 15 0 3 2 0 1 1 0 6
1200000: 0 2 1 2 2 0 3 0 0 0 1 4
1398000: 1 0 1 1 4 0 0 1 1 0 2 2
1512000: 0 0 0 0 0 0 1 0 0 0 0 1
1608000: 1 0 0 1 0 1 0 0 0 0 0 3
1704000: 0 0 0 0 0 1 0 1 0 0 0 1
1800000: 0 0 1 1 0 0 1 0 1 0 0 1
1908000: 8 158 90 4 3 3 3 0 1 2 0 0
Board boots in under 4 seconds, Kodi home-screen in about 7 seconds. I haven’t seen the N2 rise over 44ºC.
I’ve also tested some S922X box devices (moving the change to meson-g12b-s922x.dtsi) and no obvious issues.
Tested-by: Christian Hewitt <christianshewitt@gmail.com>
> ---
> .../boot/dts/amlogic/meson-g12b-odroid-n2.dts | 19 +++++++++++++++++++
> 1 file changed, 19 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
> index 42f154057..6f32ac83f 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
> @@ -260,6 +260,25 @@
> };
> };
> };
> +
> + cpu_opp_table_0: opp-table-0 {
> + opp-1992000000 {
> + opp-hz = /bits/ 64 <1992000000>;
> + opp-microvolt = <1001000>;
> + };
> + };
> +
> + cpub_opp_table_1: opp-table-1 {
> + opp-1800000000 {
> + opp-hz = /bits/ 64 <1800000000>;
> + opp-microvolt = <981000>;
> + };
> +
> + opp-1908000000 {
> + opp-hz = /bits/ 64 <1908000000>;
> + opp-microvolt = <1022000>;
> + };
> + };
> };
>
> &arb {
> --
> 2.17.1
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [v2] arm64: dts: meson: odroid-n2: extend cpu opp-points
2020-04-22 14:54 ` Christian Hewitt
@ 2020-04-22 15:08 ` Neil Armstrong
0 siblings, 0 replies; 3+ messages in thread
From: Neil Armstrong @ 2020-04-22 15:08 UTC (permalink / raw)
To: Christian Hewitt, Tim Lewis
Cc: mark.rutland, devicetree, joy.cho, khilman, linux-kernel, robh+dt,
tobetter, linux-amlogic, linux-arm-kernel
Hi,
Could you add "[PATCH vX]" in the subject ?
On 22/04/2020 16:54, Christian Hewitt wrote:
>
>> On 19 Apr 2020, at 1:42 am, Tim Lewis <elatllat@gmail.com> wrote:
>>
>> Odroid N2 has a large heatsink and HardKernel supports overclock
>> through the addition to extra opp points in their official kernel
>> sources [1]. Add these to the N2 dts only, as other S922X devices
>> may not have suitable heatsinks.
>>
>> [1] https://github.com/hardkernel/linux/commit/f86cd9487c7483b2a05f448b9ebacf6bd5a2ad2f
>> Signed-off-by: Tim Lewis <elatllat@gmail.com>
>
> Kodi is not a demanding workload, but the extra opp points are being used:
>
> N2:~ # cat /sys/devices/system/cpu/cpufreq/policy0/stats/trans_table
> From : To
> : 100000 250000 500000 667000 1000000 1200000 1398000 1512000 1608000 1704000 1896000 1992000
> 100000: 0 20465 294 81 47 0 1 0 0 0 0 183
> 250000: 20388 0 161 52 59 0 0 0 1 0 1 169
> 500000: 199 256 0 9 47 1 2 0 0 0 0 57
> 667000: 177 50 10 0 284 1 1 0 0 0 0 136
> 1000000: 230 12 15 284 0 1 2 0 0 0 0 285
> 1200000: 0 0 0 1 0 0 0 0 0 1 0 2
> 1398000: 1 1 0 2 0 0 0 0 1 1 0 3
> 1512000: 0 0 0 0 0 0 0 0 0 1 0 2
> 1608000: 0 0 0 0 0 0 0 1 0 0 0 2
> 1704000: 0 1 0 0 0 0 1 0 0 0 0 2
> 1896000: 0 0 1 0 0 0 0 0 0 0 0 1
> 1992000: 76 47 90 230 392 0 2 2 1 1 1 0
>
> N2:~ # cat /sys/devices/system/cpu/cpufreq/policy2/stats/trans_table
> From : To
> : 100000 250000 500000 667000 1000000 1200000 1398000 1512000 1608000 1704000 1800000 1908000
> 100000: 0 1698 130 76 87 0 0 0 1 0 1 199
> 250000: 1655 0 25 15 357 1 2 0 1 0 0 12
> 500000: 258 54 0 50102 30 3 1 0 0 0 1 32
> 667000: 267 151 49708 0 77 3 0 0 0 0 0 11
> 1000000: 3 5 525 15 0 3 2 0 1 1 0 6
> 1200000: 0 2 1 2 2 0 3 0 0 0 1 4
> 1398000: 1 0 1 1 4 0 0 1 1 0 2 2
> 1512000: 0 0 0 0 0 0 1 0 0 0 0 1
> 1608000: 1 0 0 1 0 1 0 0 0 0 0 3
> 1704000: 0 0 0 0 0 1 0 1 0 0 0 1
> 1800000: 0 0 1 1 0 0 1 0 1 0 0 1
> 1908000: 8 158 90 4 3 3 3 0 1 2 0 0
>
> Board boots in under 4 seconds, Kodi home-screen in about 7 seconds. I haven’t seen the N2 rise over 44ºC.
>
> I’ve also tested some S922X box devices (moving the change to meson-g12b-s922x.dtsi) and no obvious issues.
>
> Tested-by: Christian Hewitt <christianshewitt@gmail.com>
>
>> ---
>> .../boot/dts/amlogic/meson-g12b-odroid-n2.dts | 19 +++++++++++++++++++
>> 1 file changed, 19 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
>> index 42f154057..6f32ac83f 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
>> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
>> @@ -260,6 +260,25 @@
>> };
>> };
>> };
>> +
>> + cpu_opp_table_0: opp-table-0 {
>> + opp-1992000000 {
>> + opp-hz = /bits/ 64 <1992000000>;
>> + opp-microvolt = <1001000>;
>> + };
>> + };
>> +
>> + cpub_opp_table_1: opp-table-1 {
>> + opp-1800000000 {
>> + opp-hz = /bits/ 64 <1800000000>;
>> + opp-microvolt = <981000>;
>> + };
>> +
>> + opp-1908000000 {
>> + opp-hz = /bits/ 64 <1908000000>;
>> + opp-microvolt = <1022000>;
>> + };
>> + };
>> };
>>
>> &arb {
>> --
>> 2.17.1
>>
>
I think it could be moved to all s922x devices since we have dvfs and thermal management enabled by default,
so other devices with inferior cooling will use lower OPPs automatically.
Neil
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2020-04-22 15:08 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-04-18 21:42 [v2] arm64: dts: meson: odroid-n2: extend cpu opp-points Tim Lewis
2020-04-22 14:54 ` Christian Hewitt
2020-04-22 15:08 ` Neil Armstrong
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).