[PATCH AUTOSEL 5.4 01/57] drm/bridge: analogix_dp: Split bind() into probe() and real bind()

[PATCH AUTOSEL 5.4 01/57] drm/bridge: analogix_dp: Split bind() into probe() and real bind()

[Sasha Levin]

From: Marek Szyprowski <m.szyprowski@samsung.com>

[ Upstream commit 83a196773b8bc6702f49df1eddc848180e350340 ]

Analogix_dp driver acquires all its resources in the ->bind() callback,
what is a bit against the component driver based approach, where the
driver initialization is split into a probe(), where all resources are
gathered, and a bind(), where all objects are created and a compound
driver is initialized.

Extract all the resource related operations to analogix_dp_probe() and
analogix_dp_remove(), then call them before/after registration of the
device components from the main Exynos DP and Rockchip DP drivers. Also
move the plat_data initialization to the probe() to make it available for
the analogix_dp_probe() function.

This fixes the multiple calls to the bind() of the DRM compound driver
when the DP PHY driver is not yet loaded/probed:

[drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations
exynos-drm exynos-drm: bound 14400000.fimd (ops fimd_component_ops [exynosdrm])
exynos-drm exynos-drm: bound 14450000.mixer (ops mixer_component_ops [exynosdrm])
exynos-dp 145b0000.dp-controller: no DP phy configured
exynos-drm exynos-drm: failed to bind 145b0000.dp-controller (ops exynos_dp_ops [exynosdrm]): -517
exynos-drm exynos-drm: master bind failed: -517
...
[drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations
exynos-drm exynos-drm: bound 14400000.fimd (ops hdmi_enable [exynosdrm])
exynos-drm exynos-drm: bound 14450000.mixer (ops hdmi_enable [exynosdrm])
exynos-drm exynos-drm: bound 145b0000.dp-controller (ops hdmi_enable [exynosdrm])
exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_enable [exynosdrm])
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
Console: switching to colour frame buffer device 170x48
exynos-drm exynos-drm: fb0: exynosdrmfb frame buffer device
[drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1
...

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200310103427.26048-1-m.szyprowski@samsung.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../drm/bridge/analogix/analogix_dp_core.c    | 33 +++++++++++------
 drivers/gpu/drm/exynos/exynos_dp.c            | 29 ++++++++-------
 .../gpu/drm/rockchip/analogix_dp-rockchip.c   | 36 ++++++++++---------
 include/drm/bridge/analogix_dp.h              |  5 +--
 4 files changed, 61 insertions(+), 42 deletions(-)

diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 22885dceaa177..1f26890a8da6e 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -1635,8 +1635,7 @@ static ssize_t analogix_dpaux_transfer(struct drm_dp_aux *aux,
 }
 
 struct analogix_dp_device *
-analogix_dp_bind(struct device *dev, struct drm_device *drm_dev,
-		 struct analogix_dp_plat_data *plat_data)
+analogix_dp_probe(struct device *dev, struct analogix_dp_plat_data *plat_data)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct analogix_dp_device *dp;
@@ -1739,22 +1738,30 @@ analogix_dp_bind(struct device *dev, struct drm_device *drm_dev,
 					irq_flags, "analogix-dp", dp);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to request irq\n");
-		goto err_disable_pm_runtime;
+		return ERR_PTR(ret);
 	}
 	disable_irq(dp->irq);
 
+	return dp;
+}
+EXPORT_SYMBOL_GPL(analogix_dp_probe);
+
+int analogix_dp_bind(struct analogix_dp_device *dp, struct drm_device *drm_dev)
+{
+	int ret;
+
 	dp->drm_dev = drm_dev;
 	dp->encoder = dp->plat_data->encoder;
 
 	dp->aux.name = "DP-AUX";
 	dp->aux.transfer = analogix_dpaux_transfer;
-	dp->aux.dev = &pdev->dev;
+	dp->aux.dev = dp->dev;
 
 	ret = drm_dp_aux_register(&dp->aux);
 	if (ret)
-		return ERR_PTR(ret);
+		return ret;
 
-	pm_runtime_enable(dev);
+	pm_runtime_enable(dp->dev);
 
 	ret = analogix_dp_create_bridge(drm_dev, dp);
 	if (ret) {
@@ -1762,13 +1769,12 @@ analogix_dp_bind(struct device *dev, struct drm_device *drm_dev,
 		goto err_disable_pm_runtime;
 	}
 
-	return dp;
+	return 0;
 
 err_disable_pm_runtime:
+	pm_runtime_disable(dp->dev);
 
-	pm_runtime_disable(dev);
-
-	return ERR_PTR(ret);
+	return ret;
 }
 EXPORT_SYMBOL_GPL(analogix_dp_bind);
 
@@ -1785,10 +1791,15 @@ void analogix_dp_unbind(struct analogix_dp_device *dp)
 
 	drm_dp_aux_unregister(&dp->aux);
 	pm_runtime_disable(dp->dev);
-	clk_disable_unprepare(dp->clock);
 }
 EXPORT_SYMBOL_GPL(analogix_dp_unbind);
 
+void analogix_dp_remove(struct analogix_dp_device *dp)
+{
+	clk_disable_unprepare(dp->clock);
+}
+EXPORT_SYMBOL_GPL(analogix_dp_remove);
+
 #ifdef CONFIG_PM
 int analogix_dp_suspend(struct analogix_dp_device *dp)
 {
diff --git a/drivers/gpu/drm/exynos/exynos_dp.c b/drivers/gpu/drm/exynos/exynos_dp.c
index 3a0f0ba8c63a0..e0cfae744afc9 100644
--- a/drivers/gpu/drm/exynos/exynos_dp.c
+++ b/drivers/gpu/drm/exynos/exynos_dp.c
@@ -158,15 +158,8 @@ static int exynos_dp_bind(struct device *dev, struct device *master, void *data)
 	struct drm_device *drm_dev = data;
 	int ret;
 
-	dp->dev = dev;
 	dp->drm_dev = drm_dev;
 
-	dp->plat_data.dev_type = EXYNOS_DP;
-	dp->plat_data.power_on_start = exynos_dp_poweron;
-	dp->plat_data.power_off = exynos_dp_poweroff;
-	dp->plat_data.attach = exynos_dp_bridge_attach;
-	dp->plat_data.get_modes = exynos_dp_get_modes;
-
 	if (!dp->plat_data.panel && !dp->ptn_bridge) {
 		ret = exynos_dp_dt_parse_panel(dp);
 		if (ret)
@@ -184,13 +177,11 @@ static int exynos_dp_bind(struct device *dev, struct device *master, void *data)
 
 	dp->plat_data.encoder = encoder;
 
-	dp->adp = analogix_dp_bind(dev, dp->drm_dev, &dp->plat_data);
-	if (IS_ERR(dp->adp)) {
+	ret = analogix_dp_bind(dp->adp, dp->drm_dev);
+	if (ret)
 		dp->encoder.funcs->destroy(&dp->encoder);
-		return PTR_ERR(dp->adp);
-	}
 
-	return 0;
+	return ret;
 }
 
 static void exynos_dp_unbind(struct device *dev, struct device *master,
@@ -221,6 +212,7 @@ static int exynos_dp_probe(struct platform_device *pdev)
 	if (!dp)
 		return -ENOMEM;
 
+	dp->dev = dev;
 	/*
 	 * We just use the drvdata until driver run into component
 	 * add function, and then we would set drvdata to null, so
@@ -246,16 +238,29 @@ static int exynos_dp_probe(struct platform_device *pdev)
 
 	/* The remote port can be either a panel or a bridge */
 	dp->plat_data.panel = panel;
+	dp->plat_data.dev_type = EXYNOS_DP;
+	dp->plat_data.power_on_start = exynos_dp_poweron;
+	dp->plat_data.power_off = exynos_dp_poweroff;
+	dp->plat_data.attach = exynos_dp_bridge_attach;
+	dp->plat_data.get_modes = exynos_dp_get_modes;
 	dp->plat_data.skip_connector = !!bridge;
+
 	dp->ptn_bridge = bridge;
 
 out:
+	dp->adp = analogix_dp_probe(dev, &dp->plat_data);
+	if (IS_ERR(dp->adp))
+		return PTR_ERR(dp->adp);
+
 	return component_add(&pdev->dev, &exynos_dp_ops);
 }
 
 static int exynos_dp_remove(struct platform_device *pdev)
 {
+	struct exynos_dp_device *dp = platform_get_drvdata(pdev);
+
 	component_del(&pdev->dev, &exynos_dp_ops);
+	analogix_dp_remove(dp->adp);
 
 	return 0;
 }
diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
index f38f5e113c6b3..ce98c08aa8b44 100644
--- a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
+++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
@@ -325,15 +325,9 @@ static int rockchip_dp_bind(struct device *dev, struct device *master,
 			    void *data)
 {
 	struct rockchip_dp_device *dp = dev_get_drvdata(dev);
-	const struct rockchip_dp_chip_data *dp_data;
 	struct drm_device *drm_dev = data;
 	int ret;
 
-	dp_data = of_device_get_match_data(dev);
-	if (!dp_data)
-		return -ENODEV;
-
-	dp->data = dp_data;
 	dp->drm_dev = drm_dev;
 
 	ret = rockchip_dp_drm_create_encoder(dp);
@@ -344,16 +338,9 @@ static int rockchip_dp_bind(struct device *dev, struct device *master,
 
 	dp->plat_data.encoder = &dp->encoder;
 
-	dp->plat_data.dev_type = dp->data->chip_type;
-	dp->plat_data.power_on_start = rockchip_dp_poweron_start;
-	dp->plat_data.power_off = rockchip_dp_powerdown;
-	dp->plat_data.get_modes = rockchip_dp_get_modes;
-
-	dp->adp = analogix_dp_bind(dev, dp->drm_dev, &dp->plat_data);
-	if (IS_ERR(dp->adp)) {
-		ret = PTR_ERR(dp->adp);
+	ret = analogix_dp_bind(dp->adp, drm_dev);
+	if (ret)
 		goto err_cleanup_encoder;
-	}
 
 	return 0;
 err_cleanup_encoder:
@@ -368,8 +355,6 @@ static void rockchip_dp_unbind(struct device *dev, struct device *master,
 
 	analogix_dp_unbind(dp->adp);
 	dp->encoder.funcs->destroy(&dp->encoder);
-
-	dp->adp = ERR_PTR(-ENODEV);
 }
 
 static const struct component_ops rockchip_dp_component_ops = {
@@ -380,10 +365,15 @@ static const struct component_ops rockchip_dp_component_ops = {
 static int rockchip_dp_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
+	const struct rockchip_dp_chip_data *dp_data;
 	struct drm_panel *panel = NULL;
 	struct rockchip_dp_device *dp;
 	int ret;
 
+	dp_data = of_device_get_match_data(dev);
+	if (!dp_data)
+		return -ENODEV;
+
 	ret = drm_of_find_panel_or_bridge(dev->of_node, 1, 0, &panel, NULL);
 	if (ret < 0)
 		return ret;
@@ -394,7 +384,12 @@ static int rockchip_dp_probe(struct platform_device *pdev)
 
 	dp->dev = dev;
 	dp->adp = ERR_PTR(-ENODEV);
+	dp->data = dp_data;
 	dp->plat_data.panel = panel;
+	dp->plat_data.dev_type = dp->data->chip_type;
+	dp->plat_data.power_on_start = rockchip_dp_poweron_start;
+	dp->plat_data.power_off = rockchip_dp_powerdown;
+	dp->plat_data.get_modes = rockchip_dp_get_modes;
 
 	ret = rockchip_dp_of_probe(dp);
 	if (ret < 0)
@@ -402,12 +397,19 @@ static int rockchip_dp_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, dp);
 
+	dp->adp = analogix_dp_probe(dev, &dp->plat_data);
+	if (IS_ERR(dp->adp))
+		return PTR_ERR(dp->adp);
+
 	return component_add(dev, &rockchip_dp_component_ops);
 }
 
 static int rockchip_dp_remove(struct platform_device *pdev)
 {
+	struct rockchip_dp_device *dp = platform_get_drvdata(pdev);
+
 	component_del(&pdev->dev, &rockchip_dp_component_ops);
+	analogix_dp_remove(dp->adp);
 
 	return 0;
 }
diff --git a/include/drm/bridge/analogix_dp.h b/include/drm/bridge/analogix_dp.h
index 7aa2f93da49ca..b0dcc07334a1e 100644
--- a/include/drm/bridge/analogix_dp.h
+++ b/include/drm/bridge/analogix_dp.h
@@ -42,9 +42,10 @@ int analogix_dp_resume(struct analogix_dp_device *dp);
 int analogix_dp_suspend(struct analogix_dp_device *dp);
 
 struct analogix_dp_device *
-analogix_dp_bind(struct device *dev, struct drm_device *drm_dev,
-		 struct analogix_dp_plat_data *plat_data);
+analogix_dp_probe(struct device *dev, struct analogix_dp_plat_data *plat_data);
+int analogix_dp_bind(struct analogix_dp_device *dp, struct drm_device *drm_dev);
 void analogix_dp_unbind(struct analogix_dp_device *dp);
+void analogix_dp_remove(struct analogix_dp_device *dp);
 
 int analogix_dp_start_crc(struct drm_connector *connector);
 int analogix_dp_stop_crc(struct drm_connector *connector);
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 10/57] drivers: soc: xilinx: fix firmware driver Kconfig dependency

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit d0384eedcde21276ac51f57c641f875605024b32 ]

The firmware driver is optional, but the power driver depends on it,
which needs to be reflected in Kconfig to avoid link errors:

aarch64-linux-ld: drivers/soc/xilinx/zynqmp_power.o: in function `zynqmp_pm_isr':
zynqmp_power.c:(.text+0x284): undefined reference to `zynqmp_pm_invoke_fn'

The firmware driver can probably be allowed for compile-testing as
well, so it's best to drop the dependency on the ZYNQ platform
here and allow building as long as the firmware code is built-in.

Fixes: ab272643d723 ("drivers: soc: xilinx: Add ZynqMP PM driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200408155224.2070880-1-arnd@arndb.de
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/xilinx/Kconfig | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/soc/xilinx/Kconfig b/drivers/soc/xilinx/Kconfig
index 01e76b58dd78a..3fa162c1fde73 100644
--- a/drivers/soc/xilinx/Kconfig
+++ b/drivers/soc/xilinx/Kconfig
@@ -19,7 +19,7 @@ config XILINX_VCU
 
 config ZYNQMP_POWER
 	bool "Enable Xilinx Zynq MPSoC Power Management driver"
-	depends on PM && ARCH_ZYNQMP
+	depends on PM && ZYNQMP_FIRMWARE
 	default y
 	help
 	  Say yes to enable power management support for ZyqnMP SoC.
@@ -31,7 +31,7 @@ config ZYNQMP_POWER
 config ZYNQMP_PM_DOMAINS
 	bool "Enable Zynq MPSoC generic PM domains"
 	default y
-	depends on PM && ARCH_ZYNQMP && ZYNQMP_FIRMWARE
+	depends on PM && ZYNQMP_FIRMWARE
 	select PM_GENERIC_DOMAINS
 	help
 	  Say yes to enable device power management through PM domains
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 19/57] ARM: dts: bcm283x: Disable dsi0 node

[Sasha Levin]

From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>

[ Upstream commit 90444b958461a5f8fc299ece0fe17eab15cba1e1 ]

Since its inception the module was meant to be disabled by default, but
the original commit failed to add the relevant property.

Fixes: 4aba4cf82054 ("ARM: dts: bcm2835: Add the DSI module nodes and clocks")
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/bcm283x.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
index 90125ce19a1b3..50c64146d4926 100644
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -488,6 +488,7 @@
 					     "dsi0_ddr2",
 					     "dsi0_ddr";
 
+			status = "disabled";
 		};
 
 		thermal: thermal@7e212000 {
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 21/57] usb: gadget: udc: atmel: Fix vbus disconnect handling

[Sasha Levin]

From: Cristian Birsan <cristian.birsan@microchip.com>

[ Upstream commit 12b94da411f9c6d950beb067d913024fd5617a61 ]

A DMA transfer can be in progress while vbus is lost due to a cable
disconnect. For endpoints that use DMA, this condition can lead to
peripheral hang. The patch ensures that endpoints are disabled before
the clocks are stopped to prevent this issue.

Fixes: a64ef71ddc13 ("usb: gadget: atmel_usba_udc: condition clocks to vbus state")
Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/udc/atmel_usba_udc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c
index 1d0d8952a74bf..58e5b015d40e6 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.c
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.c
@@ -1950,10 +1950,10 @@ static irqreturn_t usba_vbus_irq_thread(int irq, void *devid)
 			usba_start(udc);
 		} else {
 			udc->suspended = false;
-			usba_stop(udc);
-
 			if (udc->driver->disconnect)
 				udc->driver->disconnect(&udc->gadget);
+
+			usba_stop(udc);
 		}
 		udc->vbus_prev = vbus;
 	}
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 23/57] ASoC: stm32: sai: fix sai probe

[Sasha Levin]

From: Olivier Moysan <olivier.moysan@st.com>

[ Upstream commit e2bcb65782f91390952e849e21b82ed7cb05697f ]

pcm config must be set before snd_dmaengine_pcm_register() call.

Fixes: 0d6defc7e0e4 ("ASoC: stm32: sai: manage rebind issue")

Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20200417142122.10212-1-olivier.moysan@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/stm/stm32_sai_sub.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

diff --git a/sound/soc/stm/stm32_sai_sub.c b/sound/soc/stm/stm32_sai_sub.c
index d3259de43712b..7e965848796c3 100644
--- a/sound/soc/stm/stm32_sai_sub.c
+++ b/sound/soc/stm/stm32_sai_sub.c
@@ -1543,6 +1543,9 @@ static int stm32_sai_sub_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	if (STM_SAI_PROTOCOL_IS_SPDIF(sai))
+		conf = &stm32_sai_pcm_config_spdif;
+
 	ret = snd_dmaengine_pcm_register(&pdev->dev, conf, 0);
 	if (ret) {
 		dev_err(&pdev->dev, "Could not register pcm dma\n");
@@ -1551,15 +1554,10 @@ static int stm32_sai_sub_probe(struct platform_device *pdev)
 
 	ret = snd_soc_register_component(&pdev->dev, &stm32_component,
 					 &sai->cpu_dai_drv, 1);
-	if (ret) {
+	if (ret)
 		snd_dmaengine_pcm_unregister(&pdev->dev);
-		return ret;
-	}
-
-	if (STM_SAI_PROTOCOL_IS_SPDIF(sai))
-		conf = &stm32_sai_pcm_config_spdif;
 
-	return 0;
+	return ret;
 }
 
 static int stm32_sai_sub_remove(struct platform_device *pdev)
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel