public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
To: linux-amlogic@lists.infradead.org, linux-mmc@vger.kernel.org,
	ulf.hansson@linaro.org, robh+dt@kernel.org
Cc: devicetree@vger.kernel.org, jianxin.pan@amlogic.com,
	linux.amoon@gmail.com, linux-kernel@vger.kernel.org,
	yinxin_1989@aliyun.com,
	Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
	jbrunet@baylibre.com, linux-arm-kernel@lists.infradead.org,
	lnykww@gmail.com
Subject: [PATCH v7 1/2] dt-bindings: mmc: Document the Amlogic Meson SDHC MMC host controller
Date: Tue, 12 May 2020 22:41:46 +0200	[thread overview]
Message-ID: <20200512204147.504087-2-martin.blumenstingl@googlemail.com> (raw)
In-Reply-To: <20200512204147.504087-1-martin.blumenstingl@googlemail.com>

This documents the devicetree bindings for the SDHC MMC host controller
found in Meson6, Meson8, Meson8b and Meson8m2 SoCs. It can use a
bus-width of 1/4/8-bit and it supports eMMC spec 4.4x/4.5x including
HS200 mode (up to 100MHz clock). It embeds an internal clock controller
which outputs four clocks (mod_clk, sd_clk, tx_clk and rx_clk) and is
fed by four external input clocks (clkin[0-3]). "pclk" is the module
register clock, it has to be enabled to access the registers.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 .../bindings/mmc/amlogic,meson-mx-sdhc.yaml   | 68 +++++++++++++++++++
 1 file changed, 68 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml

diff --git a/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml b/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml
new file mode 100644
index 000000000000..7a386a5b8fcb
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/amlogic,meson-mx-sdhc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson SDHC controller Device Tree Bindings
+
+allOf:
+  - $ref: "mmc-controller.yaml"
+
+maintainers:
+  - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+
+description: |
+  The SDHC MMC host controller on Amlogic SoCs provides an eMMC and MMC
+  card interface with 1/4/8-bit bus width.
+  It supports eMMC spec 4.4x/4.5x including HS200 (up to 100MHz clock).
+
+properties:
+  compatible:
+    items:
+      - enum:
+        - amlogic,meson8-sdhc
+        - amlogic,meson8b-sdhc
+        - amlogic,meson8m2-sdhc
+      - const: amlogic,meson-mx-sdhc
+
+  reg:
+    minItems: 1
+
+  interrupts:
+    minItems: 1
+
+  clocks:
+    minItems: 5
+
+  clock-names:
+    items:
+      - const: clkin0
+      - const: clkin1
+      - const: clkin2
+      - const: clkin3
+      - const: pclk
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    sdhc: mmc@8e00 {
+      compatible = "amlogic,meson8-sdhc", "amlogic,meson-mx-sdhc";
+      reg = <0x8e00 0x42>;
+      interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>;
+      clocks = <&xtal>,
+               <&fclk_div4>,
+               <&fclk_div3>,
+               <&fclk_div5>,
+               <&sdhc_pclk>;
+      clock-names = "clkin0", "clkin1", "clkin2", "clkin3", "pclk";
+    };
-- 
2.26.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2020-05-12 20:42 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-12 20:41 [PATCH v7 0/2] Amlogic 32-bit Meson SoC SDHC MMC controller driver Martin Blumenstingl
2020-05-12 20:41 ` Martin Blumenstingl [this message]
2020-05-12 22:44   ` [PATCH v7 1/2] dt-bindings: mmc: Document the Amlogic Meson SDHC MMC host controller Rob Herring
2020-05-12 20:41 ` [PATCH v7 2/2] mmc: host: meson-mx-sdhc: new driver for the Amlogic Meson SDHC host Martin Blumenstingl
2020-05-13 12:04   ` Ulf Hansson
2020-05-13 12:40     ` Jerome Brunet
2020-05-15  7:09 ` [PATCH v7 0/2] Amlogic 32-bit Meson SoC SDHC MMC controller driver Ulf Hansson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200512204147.504087-2-martin.blumenstingl@googlemail.com \
    --to=martin.blumenstingl@googlemail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jbrunet@baylibre.com \
    --cc=jianxin.pan@amlogic.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux.amoon@gmail.com \
    --cc=lnykww@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=ulf.hansson@linaro.org \
    --cc=yinxin_1989@aliyun.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox