From: Ondrej Jirman <megous@megous.com>
To: linux-sunxi@googlegroups.com,
Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>
Cc: Ondrej Jirman <megous@megous.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Luca Weiss <luca@z3ntu.xyz>, Tomas Novotny <tomas@novotny.cz>,
linux-input@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 3/4] ARM: dts: sun8i-a83t-tbs-a711: Add support for the vibrator motor
Date: Wed, 13 May 2020 00:22:04 +0200 [thread overview]
Message-ID: <20200512222205.1456300-4-megous@megous.com> (raw)
In-Reply-To: <20200512222205.1456300-1-megous@megous.com>
The board has a vibrator mottor. Hook it to the input subsystem.
According to the PMIC specification, LDO needs to be enabled (value 0b11)
to achieve the specified max driving current of 150mA. We can't drive
the motor with just GPIO mode.
In GPIO mode the chip is probably just using the regular CMOS logic
output circuitry (typically limited to around 20-35mA, but not specified
in this datasheet).
Signed-off-by: Ondrej Jirman <megous@megous.com>
---
arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
index bfc9bb277a49..a278a1e33930 100644
--- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
@@ -99,6 +99,11 @@ panel_input: endpoint {
};
};
+ vibrator {
+ compatible = "gpio-vibrator";
+ vcc-supply = <®_ldo_io1>;
+ };
+
reg_gps: reg-gps {
compatible = "regulator-fixed";
regulator-name = "gps";
--
2.26.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-05-12 22:22 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-12 22:22 [PATCH v2 0/4] Add support for vibrator motor for TBS A711 Tablet Ondrej Jirman
2020-05-12 22:22 ` [PATCH v2 1/4] dt-bindings: input: gpio-vibrator: Don't require enable-gpios Ondrej Jirman
2020-05-12 22:52 ` Dmitry Torokhov
2020-05-12 23:05 ` Ondřej Jirman
2020-05-12 23:25 ` Dmitry Torokhov
2020-05-12 22:22 ` [PATCH v2 2/4] input: gpio-vibra: Allow to use vcc-supply alone to control the vibrator Ondrej Jirman
2020-05-12 22:22 ` Ondrej Jirman [this message]
2020-05-12 22:22 ` [PATCH v2 4/4] ARM: dts: sun8i-a83t-tbs-a711: Increase voltage on " Ondrej Jirman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200512222205.1456300-4-megous@megous.com \
--to=megous@megous.com \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=luca@z3ntu.xyz \
--cc=mark.rutland@arm.com \
--cc=mripard@kernel.org \
--cc=robh+dt@kernel.org \
--cc=tomas@novotny.cz \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox