From: Lars Povlsen <lars.povlsen@microchip.com>
To: SoC Team <soc@kernel.org>, Linus Walleij <linus.walleij@linaro.org>
Cc: devicetree@vger.kernel.org,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
linux-kernel@vger.kernel.org,
Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>,
linux-gpio@vger.kernel.org,
Lars Povlsen <lars.povlsen@microchip.com>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/3] arm64: dts: sparx5: Add SGPIO devices
Date: Wed, 13 May 2020 16:11:34 +0200 [thread overview]
Message-ID: <20200513141134.25819-4-lars.povlsen@microchip.com> (raw)
In-Reply-To: <20200513141134.25819-1-lars.povlsen@microchip.com>
This adds SGPIO devices for the Sparx5 SoC and configures it for the
applicable reference boards.
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
---
arch/arm64/boot/dts/microchip/sparx5.dtsi | 52 +++++++++++++++++++
.../boot/dts/microchip/sparx5_pcb125.dts | 5 ++
.../dts/microchip/sparx5_pcb134_board.dtsi | 5 ++
3 files changed, 62 insertions(+)
diff --git a/arch/arm64/boot/dts/microchip/sparx5.dtsi b/arch/arm64/boot/dts/microchip/sparx5.dtsi
index 60629861a5157..b4fda5616536c 100644
--- a/arch/arm64/boot/dts/microchip/sparx5.dtsi
+++ b/arch/arm64/boot/dts/microchip/sparx5.dtsi
@@ -213,6 +213,22 @@ si2_pins: si2-pins {
function = "si2";
};
+ sgpio0_pins: sgpio-pins {
+ pins = "GPIO_0", "GPIO_1", "GPIO_2", "GPIO_3";
+ function = "sg0";
+ };
+
+ sgpio1_pins: sgpio1-pins {
+ pins = "GPIO_4", "GPIO_5", "GPIO_12", "GPIO_13";
+ function = "sg1";
+ };
+
+ sgpio2_pins: sgpio2-pins {
+ pins = "GPIO_30", "GPIO_31", "GPIO_32",
+ "GPIO_33";
+ function = "sg2";
+ };
+
uart_pins: uart-pins {
pins = "GPIO_10", "GPIO_11";
function = "uart";
@@ -243,6 +259,42 @@ emmc_pins: emmc-pins {
};
};
+ sgpio0: gpio@61101036c {
+ compatible = "mscc,ocelot-sgpio";
+ status = "disabled";
+ clocks = <&sys_clk>;
+ pinctrl-0 = <&sgpio0_pins>;
+ pinctrl-names = "default";
+ reg = <0x6 0x1101036c 0x100>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&gpio 0 64 64>;
+ };
+
+ sgpio1: gpio@611010484 {
+ compatible = "mscc,ocelot-sgpio";
+ status = "disabled";
+ clocks = <&sys_clk>;
+ pinctrl-0 = <&sgpio1_pins>;
+ pinctrl-names = "default";
+ reg = <0x6 0x11010484 0x100>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&gpio 0 128 64>;
+ };
+
+ sgpio2: gpio@61101059c {
+ compatible = "mscc,ocelot-sgpio";
+ status = "disabled";
+ clocks = <&sys_clk>;
+ pinctrl-0 = <&sgpio2_pins>;
+ pinctrl-names = "default";
+ reg = <0x6 0x1101059c 0x100>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&gpio 0 192 64>;
+ };
+
i2c0: i2c@600101000 {
compatible = "snps,designware-i2c";
status = "disabled";
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts b/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts
index 94c4c3fd5a786..fd4f5b3ddcc49 100644
--- a/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts
@@ -55,6 +55,11 @@ spi-flash@1 {
};
};
+&sgpio0 {
+ status = "okay";
+ microchip,sgpio-ports = <0x00FFFFFF>;
+};
+
&i2c1 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
index 628a05d3f57ce..2f781258f8c99 100644
--- a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
@@ -47,6 +47,11 @@ spi-flash@0 {
};
};
+&sgpio0 {
+ status = "okay";
+ microchip,sgpio-ports = <0x00FFFFFF>;
+};
+
&gpio {
i2cmux_pins_i: i2cmux-pins-i {
pins = "GPIO_16", "GPIO_17", "GPIO_18", "GPIO_19",
--
2.26.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
prev parent reply other threads:[~2020-05-13 14:12 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-13 14:11 [PATCH 0/3] pinctrl: Adding support for Microchip serial GPIO controller Lars Povlsen
2020-05-13 14:11 ` [PATCH 1/3] dt-bindings: pinctrl: Add bindings for mscc,ocelot-sgpio Lars Povlsen
2020-05-18 7:40 ` [PATCH 1/3] dt-bindings: pinctrl: Add bindings for mscc, ocelot-sgpio Linus Walleij
2020-05-18 20:49 ` Lars Povlsen
2020-05-25 8:50 ` Linus Walleij
2020-05-25 14:38 ` Lars Povlsen
2020-05-26 9:20 ` Linus Walleij
2020-05-27 8:05 ` Lars Povlsen
2020-05-27 13:45 ` Linus Walleij
2020-05-13 14:11 ` [PATCH 2/3] pinctrl: mchp-sgpio: Add pinctrl driver for Microsemi Serial GPIO Lars Povlsen
2020-05-13 15:01 ` Randy Dunlap
2020-05-18 19:44 ` Lars Povlsen
2020-05-13 14:11 ` Lars Povlsen [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200513141134.25819-4-lars.povlsen@microchip.com \
--to=lars.povlsen@microchip.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=devicetree@vger.kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=soc@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).