[PATCH v2 4/4] scsi: ufs: Fix WriteBooster flush during runtime suspend

[Stanley Chu <stanley.chu@mediatek.com>]

Currently UFS host driver promises VCC supply if UFS device
needs to do WriteBooster flush during runtime suspend.

However the UFS specification mentions,

"While the flushing operation is in progress, the device is
in Active power mode."

Therefore UFS host driver needs to promise more: Keep UFS
device as "Active power mode", otherwise UFS device shall not
do any flush if device enters Sleep or PowerDown power mode.

Fix this by not changing device power mode if WriteBooster
flush is required in ufshcd_suspend().

Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
---
 drivers/scsi/ufs/ufs.h    |  1 -
 drivers/scsi/ufs/ufshcd.c | 42 ++++++++++++++++++++-------------------
 2 files changed, 22 insertions(+), 21 deletions(-)

diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h
index b3135344ab3f..9e4bc2e97ada 100644
--- a/drivers/scsi/ufs/ufs.h
+++ b/drivers/scsi/ufs/ufs.h
@@ -577,7 +577,6 @@ struct ufs_dev_info {
 	u32 d_ext_ufs_feature_sup;
 	u8 b_wb_buffer_type;
 	u32 d_wb_alloc_units;
-	bool keep_vcc_on;
 	u8 b_presrv_uspc_en;
 };
 
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 169a3379e468..b9f7744ca2b4 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -8101,8 +8101,7 @@ static void ufshcd_vreg_set_lpm(struct ufs_hba *hba)
 	    !hba->dev_info.is_lu_power_on_wp) {
 		ufshcd_setup_vreg(hba, false);
 	} else if (!ufshcd_is_ufs_dev_active(hba)) {
-		if (!hba->dev_info.keep_vcc_on)
-			ufshcd_toggle_vreg(hba->dev, hba->vreg_info.vcc, false);
+		ufshcd_toggle_vreg(hba->dev, hba->vreg_info.vcc, false);
 		if (!ufshcd_is_link_active(hba)) {
 			ufshcd_config_vreg_lpm(hba, hba->vreg_info.vccq);
 			ufshcd_config_vreg_lpm(hba, hba->vreg_info.vccq2);
@@ -8172,6 +8171,7 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 	enum ufs_pm_level pm_lvl;
 	enum ufs_dev_pwr_mode req_dev_pwr_mode;
 	enum uic_link_state req_link_state;
+	bool keep_curr_dev_pwr_mode = false;
 
 	hba->pm_op_in_progress = 1;
 	if (!ufshcd_is_shutdown_pm(pm_op)) {
@@ -8227,27 +8227,29 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 			ufshcd_disable_auto_bkops(hba);
 		}
 		/*
-		 * With wb enabled, if the bkops is enabled or if the
-		 * configured WB type is 70% full, keep vcc ON
-		 * for the device to flush the wb buffer
+		 * If device needs to do BKOP or WB buffer flush during
+		 * Hibern8, keep device power mode as "active power mode"
+		 * and VCC supply.
 		 */
-		if ((hba->auto_bkops_enabled && ufshcd_is_wb_allowed(hba)) ||
-		    ufshcd_wb_keep_vcc_on(hba))
-			hba->dev_info.keep_vcc_on = true;
-		else
-			hba->dev_info.keep_vcc_on = false;
-	} else {
-		hba->dev_info.keep_vcc_on = false;
+		keep_curr_dev_pwr_mode = hba->auto_bkops_enabled ||
+			(((req_link_state == UIC_LINK_HIBERN8_STATE) ||
+			((req_link_state == UIC_LINK_ACTIVE_STATE) &&
+			ufshcd_is_auto_hibern8_enabled(hba))) &&
+			ufshcd_wb_keep_vcc_on(hba));
 	}
 
-	if ((req_dev_pwr_mode != hba->curr_dev_pwr_mode) &&
-	    ((ufshcd_is_runtime_pm(pm_op) && !hba->auto_bkops_enabled) ||
-	    !ufshcd_is_runtime_pm(pm_op))) {
-		/* ensure that bkops is disabled */
-		ufshcd_disable_auto_bkops(hba);
-		ret = ufshcd_set_dev_pwr_mode(hba, req_dev_pwr_mode);
-		if (ret)
-			goto enable_gating;
+	if (req_dev_pwr_mode != hba->curr_dev_pwr_mode) {
+		if ((ufshcd_is_runtime_pm(pm_op) && !hba->auto_bkops_enabled) ||
+		    !ufshcd_is_runtime_pm(pm_op)) {
+			/* ensure that bkops is disabled */
+			ufshcd_disable_auto_bkops(hba);
+		}
+
+		if (!keep_curr_dev_pwr_mode) {
+			ret = ufshcd_set_dev_pwr_mode(hba, req_dev_pwr_mode);
+			if (ret)
+				goto enable_gating;
+		}
 	}
 
 	flush_work(&hba->eeh_work);
-- 
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel