linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: James Morse <james.morse@arm.com>
To: kvmarm@lists.cs.columbia.edu, linux-arm-kernel@lists.infradead.org
Cc: Marc Zyngier <maz@kernel.org>, James Morse <james.morse@arm.com>,
	stable@vger.kernel.org,
	Julien Thierry <julien.thierry.kdev@gmail.com>,
	Suzuki K Poulose <suzuki.poulose@arm.com>
Subject: [PATCH 1/3] KVM: arm64: Stop writing aarch32's CSSELR into ACTLR
Date: Tue, 26 May 2020 16:18:32 +0000	[thread overview]
Message-ID: <20200526161834.29165-2-james.morse@arm.com> (raw)
In-Reply-To: <20200526161834.29165-1-james.morse@arm.com>

aarch32 has pairs of registers to access the high and low parts of 64bit
registers. KVM has a union of 64bit sys_regs[] and 32bit copro[]. The
32bit accessors read the high or low part of the 64bit sys_reg[] value
through the union.

Both sys_reg_descs[] and cp15_regs[] list access_csselr() as the accessor
for CSSELR{,_EL1}. access_csselr() is only aware of the 64bit sys_regs[],
and expects r->reg to be 'CSSELR_EL1' in the enum, index 2 of the 64bit
array.

cp15_regs[] uses the 32bit copro[] alias of sys_regs[]. Here CSSELR is
c0_CSSELR which is the same location in sys_reg[]. r->reg is 'c0_CSSELR',
index 4 in the 32bit array.

access_csselr() uses the 32bit r->reg value to access the 64bit array,
so reads and write the wrong value. sys_regs[4], is ACTLR_EL1, which
is subsequently save/restored when we enter the guest.

ACTLR_EL1 is supposed to be read-only for the guest. This register
only affects execution at EL1, and the host's value is restored before
we return to host EL1.

Rename access_csselr() to access_csselr_el1(), to indicate it expects
the 64bit register index, and pass it CSSELR_EL1 from cp15_regs[].

Cc: stable@vger.kernel.org
Signed-off-by: James Morse <james.morse@arm.com>
----
Providing access_csselr_cp15() wouldn't work as with VHE CSSELR_EL1 is
loaded on the CPU while this code runs. access_csselr_cp15() would have
to map it back the 64bit resgister to use vcpu_write_sys_reg(). We may
as well do it in the table.

 arch/arm64/kvm/sys_regs.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
index 51db934702b6..2eda539f3281 100644
--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@@ -1302,7 +1302,7 @@ static bool access_clidr(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 	return true;
 }
 
-static bool access_csselr(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
+static bool access_csselr_el1(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 			  const struct sys_reg_desc *r)
 {
 	if (p->is_write)
@@ -1566,7 +1566,7 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 
 	{ SYS_DESC(SYS_CCSIDR_EL1), access_ccsidr },
 	{ SYS_DESC(SYS_CLIDR_EL1), access_clidr },
-	{ SYS_DESC(SYS_CSSELR_EL1), access_csselr, reset_unknown, CSSELR_EL1 },
+	{ SYS_DESC(SYS_CSSELR_EL1), access_csselr_el1, reset_unknown, CSSELR_EL1 },
 	{ SYS_DESC(SYS_CTR_EL0), access_ctr },
 
 	{ SYS_DESC(SYS_PMCR_EL0), access_pmcr, reset_pmcr, PMCR_EL0 },
@@ -2060,7 +2060,7 @@ static const struct sys_reg_desc cp15_regs[] = {
 
 	{ Op1(1), CRn( 0), CRm( 0), Op2(0), access_ccsidr },
 	{ Op1(1), CRn( 0), CRm( 0), Op2(1), access_clidr },
-	{ Op1(2), CRn( 0), CRm( 0), Op2(0), access_csselr, NULL, c0_CSSELR },
+	{ Op1(2), CRn( 0), CRm( 0), Op2(0), access_csselr_el1, NULL, CSSELR_EL1 },
 };
 
 static const struct sys_reg_desc cp15_64_regs[] = {
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2020-05-26 16:19 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-26 16:18 [PATCH 0/3] KVM: arm64: aarch32 ACTLR accesses James Morse
2020-05-26 16:18 ` James Morse [this message]
2020-05-27 16:57   ` [PATCH 1/3] KVM: arm64: Stop writing aarch32's CSSELR into ACTLR Sasha Levin
2020-05-28  8:57   ` Marc Zyngier
2020-05-28 11:59     ` James Morse
2020-05-28 12:10       ` Marc Zyngier
2020-05-26 16:18 ` [PATCH 2/3] KVM: arm64: Stop save/restoring ACTLR_EL1 James Morse
2020-05-28 12:36   ` Marc Zyngier
2020-05-28 12:38     ` Marc Zyngier
2020-05-28 12:55       ` James Morse
2020-05-26 16:18 ` [PATCH 3/3] KVM: arm64: Add emulation for 32bit guests accessing ACTLR2 James Morse
2020-05-28 12:51   ` Marc Zyngier
2020-05-31 13:37 ` [PATCH 0/3] KVM: arm64: aarch32 ACTLR accesses Marc Zyngier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200526161834.29165-2-james.morse@arm.com \
    --to=james.morse@arm.com \
    --cc=julien.thierry.kdev@gmail.com \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=maz@kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=suzuki.poulose@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).