From: Neil Armstrong <narmstrong@baylibre.com>
To: daniel@ffwll.ch, dri-devel@lists.freedesktop.org
Cc: linux-amlogic@lists.infradead.org,
Kevin Hilman <khilman@baylibre.com>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Neil Armstrong <narmstrong@baylibre.com>
Subject: [PATCH v7 4/6] drm/meson: overlay: setup overlay for Amlogic FBC Memory Saving mode
Date: Fri, 29 May 2020 17:19:33 +0200 [thread overview]
Message-ID: <20200529151935.13418-5-narmstrong@baylibre.com> (raw)
In-Reply-To: <20200529151935.13418-1-narmstrong@baylibre.com>
Setup the Amlogic FBC decoder for the VD1 video overlay plane to use
a different superblock size for the Memory Saving mode.
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/gpu/drm/meson/meson_overlay.c | 25 +++++++++++++++++++++++--
1 file changed, 23 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/meson/meson_overlay.c b/drivers/gpu/drm/meson/meson_overlay.c
index 2713d008cee8..b5c502876428 100644
--- a/drivers/gpu/drm/meson/meson_overlay.c
+++ b/drivers/gpu/drm/meson/meson_overlay.c
@@ -487,6 +487,10 @@ static void meson_overlay_atomic_update(struct drm_plane *plane,
AFBC_HOLD_LINE_NUM(8) |
AFBC_BURST_LEN(2);
+ if (fb->modifier & DRM_FORMAT_MOD_AMLOGIC_FBC(0,
+ AMLOGIC_FBC_OPTION_MEM_SAVING))
+ priv->viu.vd1_afbc_mode |= AFBC_BLK_MEM_MODE;
+
priv->viu.vd1_afbc_en = 0x1600 | AFBC_DEC_ENABLE;
priv->viu.vd1_afbc_conv_ctrl = AFBC_CONV_LBUF_LEN(256);
@@ -672,12 +676,17 @@ static void meson_overlay_atomic_update(struct drm_plane *plane,
}
if (priv->viu.vd1_afbc) {
+ /* Default mode is 4k per superblock */
+ unsigned long block_size = 4096;
unsigned long body_size;
- /* Default mode is 4k per superblock */
+ /* 8bit mem saving mode is 3072bytes per superblock */
+ if (priv->viu.vd1_afbc_mode & AFBC_BLK_MEM_MODE)
+ block_size = 3072;
+
body_size = (ALIGN(priv->viu.vd1_stride0, 64) / 64) *
(ALIGN(priv->viu.vd1_height0, 32) / 32) *
- 4096;
+ block_size;
priv->viu.vd1_afbc_body_addr = priv->viu.vd1_addr0 >> 4;
@@ -735,6 +744,9 @@ static bool meson_overlay_format_mod_supported(struct drm_plane *plane,
unsigned int layout = modifier &
DRM_FORMAT_MOD_AMLOGIC_FBC(
__fourcc_mod_amlogic_layout_mask, 0);
+ unsigned int options =
+ (modifier >> __fourcc_mod_amlogic_options_shift) &
+ __fourcc_mod_amlogic_options_mask;
if (format != DRM_FORMAT_YUV420_8BIT &&
format != DRM_FORMAT_YUV420_10BIT) {
@@ -749,6 +761,13 @@ static bool meson_overlay_format_mod_supported(struct drm_plane *plane,
return false;
}
+ if (options &&
+ options != AMLOGIC_FBC_OPTION_MEM_SAVING) {
+ DRM_DEBUG_KMS("%llx invalid layout %x\n",
+ modifier, layout);
+ return false;
+ }
+
return true;
}
@@ -782,6 +801,8 @@ static const uint32_t supported_drm_formats[] = {
};
static const uint64_t format_modifiers[] = {
+ DRM_FORMAT_MOD_AMLOGIC_FBC(AMLOGIC_FBC_LAYOUT_BASIC,
+ AMLOGIC_FBC_OPTION_MEM_SAVING),
DRM_FORMAT_MOD_AMLOGIC_FBC(AMLOGIC_FBC_LAYOUT_BASIC, 0),
DRM_FORMAT_MOD_LINEAR,
DRM_FORMAT_MOD_INVALID,
--
2.22.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-05-29 15:21 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-29 15:19 [PATCH v7 0/6] drm/meson: add support for Amlogic Video FBC Neil Armstrong
2020-05-29 15:19 ` [PATCH v7 1/6] drm/fourcc: Add modifier definitions for describing Amlogic Video Framebuffer Compression Neil Armstrong
2020-05-29 15:19 ` [PATCH v7 2/6] drm/meson: add Amlogic Video FBC registers Neil Armstrong
2020-05-29 15:19 ` [PATCH v7 3/6] drm/meson: overlay: setup overlay for Amlogic FBC Neil Armstrong
2020-05-29 15:19 ` Neil Armstrong [this message]
2020-05-29 15:19 ` [PATCH v7 5/6] drm/meson: overlay: setup overlay for Amlogic FBC Scatter Memory layout Neil Armstrong
2020-05-29 15:19 ` [PATCH v7 6/6] drm/meson: crtc: handle commit of Amlogic FBC frames Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200529151935.13418-5-narmstrong@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox