Re: [PATCH v9 5/9] mtd: nand: Convert generic NAND bits to use the ECC framework

[Boris Brezillon <boris.brezillon@collabora.com>]

On Tue,  2 Jun 2020 16:31:20 +0200
Miquel Raynal <miquel.raynal@bootlin.com> wrote:

> Embed a generic NAND ECC high-level object in the nand_device
> structure to carry all the ECC engine configuration/data.
> 
> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> ---
>  drivers/mtd/nand/raw/nand_base.c |  4 +++-
>  include/linux/mtd/nand.h         | 12 ++++++------
>  2 files changed, 9 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
> index e8e22d79f422..ed0f642be993 100644
> --- a/drivers/mtd/nand/raw/nand_base.c
> +++ b/drivers/mtd/nand/raw/nand_base.c
> @@ -5984,7 +5984,9 @@ static int nand_scan_tail(struct nand_chip *chip)
>  	/* ECC sanity check: warn if it's too weak */
>  	if (!nand_ecc_strength_good(chip))
>  		pr_warn("WARNING: %s: the ECC used on your system (%db/%dB) is too weak compared to the one required by the NAND chip (%db/%dB)\n",
> -			mtd->name, chip->ecc.strength, chip->ecc.size,
> +			mtd->name,
> +			nanddev_get_ecc_conf(&chip->base)->strength,
> +			nanddev_get_ecc_conf(&chip->base)->step_size,

Hm, are you sure all places using chip->ecc.{strength,size} have been
patched to use nanddev_get_ecc_conf()?

>  			nanddev_get_ecc_requirements(&chip->base)->strength,
>  			nanddev_get_ecc_requirements(&chip->base)->step_size);
>  
> diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
> index 0b89da54bef2..668c99c4aaa7 100644
> --- a/include/linux/mtd/nand.h
> +++ b/include/linux/mtd/nand.h
> @@ -290,7 +290,7 @@ struct nand_ecc {
>   * struct nand_device - NAND device
>   * @mtd: MTD instance attached to the NAND device
>   * @memorg: memory layout
> - * @eccreq: ECC requirements
> + * @ecc: NAND ECC object attached to the NAND device
>   * @rowconv: position to row address converter
>   * @bbt: bad block table info
>   * @ops: NAND operations attached to the NAND device
> @@ -298,8 +298,8 @@ struct nand_ecc {
>   * Generic NAND object. Specialized NAND layers (raw NAND, SPI NAND, OneNAND)
>   * should declare their own NAND object embedding a nand_device struct (that's
>   * how inheritance is done).
> - * struct_nand_device->memorg and struct_nand_device->eccreq should be filled
> - * at device detection time to reflect the NAND device
> + * struct_nand_device->memorg and struct_nand_device->ecc.requirements should
> + * be filled at device detection time to reflect the NAND device
>   * capabilities/requirements. Once this is done nanddev_init() can be called.
>   * It will take care of converting NAND information into MTD ones, which means
>   * the specialized NAND layers should never manually tweak
> @@ -308,7 +308,7 @@ struct nand_ecc {
>  struct nand_device {
>  	struct mtd_info mtd;
>  	struct nand_memory_organization memorg;
> -	struct nand_ecc_props eccreq;
> +	struct nand_ecc ecc;
>  	struct nand_row_converter rowconv;
>  	struct nand_bbt bbt;
>  	const struct nand_ops *ops;
> @@ -519,7 +519,7 @@ nanddev_get_memorg(struct nand_device *nand)
>  static inline const struct nand_ecc_props *
>  nanddev_get_ecc_conf(struct nand_device *nand)
>  {
> -	return &nand->eccreq;
> +	return &nand->ecc.ctx.conf;
>  }
>  
>  /**
> @@ -530,7 +530,7 @@ nanddev_get_ecc_conf(struct nand_device *nand)
>  static inline const struct nand_ecc_props *
>  nanddev_get_ecc_requirements(struct nand_device *nand)
>  {
> -	return &nand->eccreq;
> +	return &nand->ecc.requirements;
>  }
>  
>  int nanddev_init(struct nand_device *nand, const struct nand_ops *ops,


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel