Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Ben Pai <Ben_Pai@wistron.com>
To: <robh+dt@kernel.org>, <mark.rutland@arm.com>, <joel@jms.id.au>,
	 <andrew@aj.id.au>, <devicetree@vger.kernel.org>,
	 <linux-arm-kernel@lists.infradead.org>,
	 <linux-aspeed@lists.ozlabs.org>, <linux-kernel@vger.kernel.org>
Cc: Ben Pai <Ben_Pai@wistron.com>, claire_ku@wistron.com
Subject: [PATCH v1] ARM: dts: aspeed: mihawk: add aliases for i2c and add thermal sensor
Date: Wed, 3 Jun 2020 17:26:22 +0800	[thread overview]
Message-ID: <20200603092622.1404-1-Ben_Pai@wistron.com> (raw)

1.Set the bus id for each mux channel to avoid switching channels
multiple times
2.Set smbus_en of IO expander to 1 in order to be able to read tmp401
sensor
3.Add 8 tmp401 thermal sensors

Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
---
 arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts | 449 +++++++++++++++++++-
 1 file changed, 444 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
index f7e935ede919..78451b283d93 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
@@ -7,7 +7,52 @@
 / {
 	model = "Mihawk BMC";
 	compatible = "ibm,mihawk-bmc", "aspeed,ast2500";
-
+	aliases {
+		i2c215 = &bus6_mux215;
+		i2c216 = &bus6_mux216;
+		i2c217 = &bus6_mux217;
+		i2c218 = &bus6_mux218;
+		i2c219 = &bus6_mux219;
+		i2c220 = &bus6_mux220;
+		i2c221 = &bus6_mux221;
+		i2c222 = &bus6_mux222;
+		i2c223 = &bus7_mux223;
+		i2c224 = &bus7_mux224;
+		i2c225 = &bus7_mux225;
+		i2c226 = &bus7_mux226;
+		i2c227 = &bus7_mux227;
+		i2c228 = &bus7_mux228;
+		i2c229 = &bus7_mux229;
+		i2c230 = &bus7_mux230;
+		i2c231 = &bus9_mux231;
+		i2c232 = &bus9_mux232;
+		i2c233 = &bus9_mux233;
+		i2c234 = &bus9_mux234;
+		i2c235 = &bus9_mux235;
+		i2c236 = &bus9_mux236;
+		i2c237 = &bus9_mux237;
+		i2c238 = &bus9_mux238;
+		i2c239 = &bus10_mux239;
+		i2c240 = &bus10_mux240;
+		i2c241 = &bus10_mux241;
+		i2c242 = &bus10_mux242;
+		i2c243 = &bus10_mux243;
+		i2c244 = &bus10_mux244;
+		i2c245 = &bus10_mux245;
+		i2c246 = &bus10_mux246;
+		i2c247 = &bus12_mux247;
+		i2c248 = &bus12_mux248;
+		i2c249 = &bus12_mux249;
+		i2c250 = &bus12_mux250;
+		i2c251 = &bus13_mux251;
+		i2c252 = &bus13_mux252;
+		i2c253 = &bus13_mux253;
+		i2c254 = &bus13_mux254;
+		i2c255 = &bus13_mux255;
+		i2c256 = &bus13_mux256;
+		i2c257 = &bus13_mux257;
+		i2c258 = &bus13_mux258;
+	};
 
 	chosen {
 		stdout-path = &uart5;
@@ -630,6 +675,55 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x70>;
+
+		bus6_mux215: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		bus6_mux216: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		bus6_mux217: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		bus6_mux218: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		bus6_mux219: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		bus6_mux220: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		bus6_mux221: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		bus6_mux222: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+
 	};
 
 };
@@ -644,6 +738,55 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x70>;
+
+		bus7_mux223: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		bus7_mux224: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		bus7_mux225: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		bus7_mux226: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		bus7_mux227: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		bus7_mux228: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		bus7_mux229: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		bus7_mux230: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+
 	};
 
 };
@@ -684,6 +827,68 @@
 		i2c-mux-idle-disconnect;
 		interrupt-controller;
 		#interrupt-cells = <2>;
+
+		bus9_mux231: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			tca9554@39 {
+				compatible = "ti,tca9554";
+				reg = <0x39>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				smbus0 {
+					gpio-hog;
+					gpios = <4 GPIO_ACTIVE_HIGH>;
+					output-high;
+					line-name = "smbus0";
+				};
+			};
+
+			tmp431@4c {
+				compatible = "ti,tmp401";
+				reg = <0x4c>;
+			};
+		};
+
+		bus9_mux232: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			tca9554@39 {
+				compatible = "ti,tca9554";
+				reg = <0x39>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				smbus1 {
+					gpio-hog;
+					gpios = <4 GPIO_ACTIVE_HIGH>;
+					output-high;
+					line-name = "smbus1";
+				};
+			};
+
+			tmp431@4c {
+				compatible = "ti,tmp401";
+				reg = <0x4c>;
+			};
+		};
+
+		bus9_mux233: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		bus9_mux234: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
 	};
 
 	pca9545@71 {
@@ -695,6 +900,68 @@
 		i2c-mux-idle-disconnect;
 		interrupt-controller;
 		#interrupt-cells = <2>;
+
+		bus9_mux235: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			tca9554@39 {
+				compatible = "ti,tca9554";
+				reg = <0x39>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				smbus2 {
+					gpio-hog;
+					gpios = <4 GPIO_ACTIVE_HIGH>;
+					output-high;
+					line-name = "smbus2";
+				};
+			};
+
+			tmp431@4c {
+				compatible = "ti,tmp401";
+				reg = <0x4c>;
+			};
+		};
+
+		bus9_mux236: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			tca9554@39 {
+				compatible = "ti,tca9554";
+				reg = <0x39>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				smbus3 {
+					gpio-hog;
+					gpios = <4 GPIO_ACTIVE_HIGH>;
+					output-high;
+					line-name = "smbus3";
+				};
+			};
+
+			tmp431@4c {
+				compatible = "ti,tmp401";
+				reg = <0x4c>;
+			};
+		};
+
+		bus9_mux237: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		bus9_mux238: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
 	};
 };
 
@@ -725,6 +992,68 @@
 		i2c-mux-idle-disconnect;
 		interrupt-controller;
 		#interrupt-cells = <2>;
+
+		bus10_mux239: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			tca9554@39 {
+				compatible = "ti,tca9554";
+				reg = <0x39>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				smbus4 {
+					gpio-hog;
+					gpios = <4 GPIO_ACTIVE_HIGH>;
+					output-high;
+					line-name = "smbus4";
+				};
+			};
+
+			tmp431@4c {
+				compatible = "ti,tmp401";
+				reg = <0x4c>;
+			};
+		};
+
+		bus10_mux240: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			tca9554@39 {
+				compatible = "ti,tca9554";
+				reg = <0x39>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				smbus5 {
+					gpio-hog;
+					gpios = <4 GPIO_ACTIVE_HIGH>;
+					output-high;
+					line-name = "smbus5";
+				};
+			};
+
+			tmp431@4c {
+				compatible = "ti,tmp401";
+				reg = <0x4c>;
+			};
+		};
+
+		bus10_mux241: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		bus10_mux242: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
 	};
 
 	pca9545@71 {
@@ -736,6 +1065,68 @@
 		i2c-mux-idle-disconnect;
 		interrupt-controller;
 		#interrupt-cells = <2>;
+
+		bus10_mux243: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			tca9554@39 {
+				compatible = "ti,tca9554";
+				reg = <0x39>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				smbus6 {
+					gpio-hog;
+					gpios = <4 GPIO_ACTIVE_HIGH>;
+					output-high;
+					line-name = "smbus6";
+				};
+			};
+
+			tmp431@4c {
+				compatible = "ti,tmp401";
+				reg = <0x4c>;
+			};
+		};
+
+		bus10_mux244: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			tca9554@39 {
+				compatible = "ti,tca9554";
+				reg = <0x39>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				smbus7 {
+					gpio-hog;
+					gpios = <4 GPIO_ACTIVE_HIGH>;
+					output-high;
+					line-name = "smbus7";
+				};
+			};
+
+			tmp431@4c {
+				compatible = "ti,tmp401";
+				reg = <0x4c>;
+			};
+		};
+
+		bus10_mux245: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		bus10_mux246: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
 	};
 };
 
@@ -796,7 +1187,7 @@
 		interrupt-controller;
 		#interrupt-cells = <2>;
 
-		i2c@0 {
+		bus12_mux247: i2c@0 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0>;
@@ -807,7 +1198,7 @@
 			};
 		};
 
-		i2c@1 {
+		bus12_mux248: i2c@1 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <1>;
@@ -818,7 +1209,7 @@
 			};
 		};
 
-		i2c@2 {
+		bus12_mux249: i2c@2 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2>;
@@ -829,7 +1220,7 @@
 			};
 		};
 
-		i2c@3 {
+		bus12_mux250: i2c@3 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <3>;
@@ -857,6 +1248,54 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x70>;
+
+		bus13_mux251: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		bus13_mux252: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		bus13_mux253: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		bus13_mux254: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		bus13_mux255: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		bus13_mux256: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		bus13_mux257: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		bus13_mux258: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
 	};
 };
 
-- 
2.17.1


---------------------------------------------------------------------------------------------------------------------------------------------------------------
This email contains confidential or legally privileged information and is for the sole use of its intended recipient. 
Any unauthorized review, use, copying or distribution of this email or the content of this email is strictly prohibited.
If you are not the intended recipient, you may reply to the sender and should delete this e-mail immediately.
---------------------------------------------------------------------------------------------------------------------------------------------------------------

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

                 reply	other threads:[~2020-06-03  9:27 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200603092622.1404-1-Ben_Pai@wistron.com \
    --to=ben_pai@wistron.com \
    --cc=andrew@aj.id.au \
    --cc=claire_ku@wistron.com \
    --cc=devicetree@vger.kernel.org \
    --cc=joel@jms.id.au \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-aspeed@lists.ozlabs.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox