linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Sasha Levin <sashal@kernel.org>,
	devel@driverdev.osuosl.org,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Sergio Paracuellos <sergio.paracuellos@gmail.com>,
	linux-mediatek@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH AUTOSEL 5.7 118/388] staging: mt7621-pci: fix PCIe interrupt mapping
Date: Wed, 17 Jun 2020 21:03:35 -0400	[thread overview]
Message-ID: <20200618010805.600873-118-sashal@kernel.org> (raw)
In-Reply-To: <20200618010805.600873-1-sashal@kernel.org>

From: Sergio Paracuellos <sergio.paracuellos@gmail.com>

[ Upstream commit fab6710e4c51f4eb622f95a08322ab5fdbe3f295 ]

MT7621 has three assigned interrupts for the pcie. This
interrupts should properly being mapped taking into account
which devices are finally connected in which bus according
to link status. So the irq mappings should be as follows
according to link status (three bits indicating which devices
are link up):

* For PCIe Bus 1 slot 0:
  - status = 0x2 || status = 0x6 => IRQ = pcie1_irq (24).
  - status = 0x4 => IRQ = pcie2_irq (25).
  - default => IRQ = pcie0_irq (23).
* For PCIe Bus 2 slot 0:
  - status = 0x5 || status = 0x6 => IRQ = pcie2_irq (25).
  - default => IRQ = pcie1_irq (24).
* For PCIe Bus 2 slot 1:
  - status = 0x5 || status = 0x6 => IRQ = pcie2_irq (25).
  - default => IRQ = pcie1_irq (24).
* For PCIe Bus 3 any slot:
  - default => IRQ = pcie2_irq (25).

Because of this, the function 'of_irq_parse_and_map_pci' cannot
be used and we need to change device tree information from using
the 'interrupt-map' and 'interrupt-map-mask' properties into an
'interrupts' property to be able to get irq information from the
ports using the 'platform_get_irq' and storing an 'irq-map' into
the pcie driver data node to properly map correct irq using a
new 'mt7621_map_irq' function where this map will be read and the
correct irq returned.

Fixes: 46d093124df4 ("staging: mt7621-pci: improve interrupt mapping")
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20200413055942.2714-1-sergio.paracuellos@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/mt7621-dts/mt7621.dtsi  |  9 +++----
 drivers/staging/mt7621-pci/pci-mt7621.c | 36 +++++++++++++++++++++++--
 2 files changed, 38 insertions(+), 7 deletions(-)

diff --git a/drivers/staging/mt7621-dts/mt7621.dtsi b/drivers/staging/mt7621-dts/mt7621.dtsi
index 9e5cf68731bb..82aa93634eda 100644
--- a/drivers/staging/mt7621-dts/mt7621.dtsi
+++ b/drivers/staging/mt7621-dts/mt7621.dtsi
@@ -523,11 +523,10 @@ pcie: pcie@1e140000 {
 			0x01000000 0 0x00000000 0x1e160000 0 0x00010000 /* io space */
 		>;
 
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0xF0000 0 0 1>;
-		interrupt-map = <0x10000 0 0 1 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>,
-				<0x20000 0 0 1 &gic GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>,
-				<0x30000 0 0 1 &gic GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH
+				GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH
+				GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>;
 
 		status = "disabled";
 
diff --git a/drivers/staging/mt7621-pci/pci-mt7621.c b/drivers/staging/mt7621-pci/pci-mt7621.c
index b9d460a9c041..36207243a71b 100644
--- a/drivers/staging/mt7621-pci/pci-mt7621.c
+++ b/drivers/staging/mt7621-pci/pci-mt7621.c
@@ -97,6 +97,7 @@
  * @pcie_rst: pointer to port reset control
  * @gpio_rst: gpio reset
  * @slot: port slot
+ * @irq: GIC irq
  * @enabled: indicates if port is enabled
  */
 struct mt7621_pcie_port {
@@ -107,6 +108,7 @@ struct mt7621_pcie_port {
 	struct reset_control *pcie_rst;
 	struct gpio_desc *gpio_rst;
 	u32 slot;
+	int irq;
 	bool enabled;
 };
 
@@ -120,6 +122,7 @@ struct mt7621_pcie_port {
  * @dev: Pointer to PCIe device
  * @io_map_base: virtual memory base address for io
  * @ports: pointer to PCIe port information
+ * @irq_map: irq mapping info according pcie link status
  * @resets_inverted: depends on chip revision
  * reset lines are inverted.
  */
@@ -135,6 +138,7 @@ struct mt7621_pcie {
 	} offset;
 	unsigned long io_map_base;
 	struct list_head ports;
+	int irq_map[PCIE_P2P_MAX];
 	bool resets_inverted;
 };
 
@@ -279,6 +283,16 @@ static void setup_cm_memory_region(struct mt7621_pcie *pcie)
 	}
 }
 
+static int mt7621_map_irq(const struct pci_dev *pdev, u8 slot, u8 pin)
+{
+	struct mt7621_pcie *pcie = pdev->bus->sysdata;
+	struct device *dev = pcie->dev;
+	int irq = pcie->irq_map[slot];
+
+	dev_info(dev, "bus=%d slot=%d irq=%d\n", pdev->bus->number, slot, irq);
+	return irq;
+}
+
 static int mt7621_pci_parse_request_of_pci_ranges(struct mt7621_pcie *pcie)
 {
 	struct device *dev = pcie->dev;
@@ -330,6 +344,7 @@ static int mt7621_pcie_parse_port(struct mt7621_pcie *pcie,
 {
 	struct mt7621_pcie_port *port;
 	struct device *dev = pcie->dev;
+	struct platform_device *pdev = to_platform_device(dev);
 	struct device_node *pnode = dev->of_node;
 	struct resource regs;
 	char name[10];
@@ -371,6 +386,12 @@ static int mt7621_pcie_parse_port(struct mt7621_pcie *pcie,
 	port->slot = slot;
 	port->pcie = pcie;
 
+	port->irq = platform_get_irq(pdev, slot);
+	if (port->irq < 0) {
+		dev_err(dev, "Failed to get IRQ for PCIe%d\n", slot);
+		return -ENXIO;
+	}
+
 	INIT_LIST_HEAD(&port->list);
 	list_add_tail(&port->list, &pcie->ports);
 
@@ -585,13 +606,15 @@ static int mt7621_pcie_init_virtual_bridges(struct mt7621_pcie *pcie)
 {
 	u32 pcie_link_status = 0;
 	u32 n;
-	int i;
+	int i = 0;
 	u32 p2p_br_devnum[PCIE_P2P_MAX];
+	int irqs[PCIE_P2P_MAX];
 	struct mt7621_pcie_port *port;
 
 	list_for_each_entry(port, &pcie->ports, list) {
 		u32 slot = port->slot;
 
+		irqs[i++] = port->irq;
 		if (port->enabled)
 			pcie_link_status |= BIT(slot);
 	}
@@ -614,6 +637,15 @@ static int mt7621_pcie_init_virtual_bridges(struct mt7621_pcie *pcie)
 		 (p2p_br_devnum[1] << PCIE_P2P_BR_DEVNUM1_SHIFT) |
 		 (p2p_br_devnum[2] << PCIE_P2P_BR_DEVNUM2_SHIFT));
 
+	/* Assign IRQs */
+	n = 0;
+	for (i = 0; i < PCIE_P2P_MAX; i++)
+		if (pcie_link_status & BIT(i))
+			pcie->irq_map[n++] = irqs[i];
+
+	for (i = n; i < PCIE_P2P_MAX; i++)
+		pcie->irq_map[i] = -1;
+
 	return 0;
 }
 
@@ -638,7 +670,7 @@ static int mt7621_pcie_register_host(struct pci_host_bridge *host,
 	host->busnr = pcie->busn.start;
 	host->dev.parent = pcie->dev;
 	host->ops = &mt7621_pci_ops;
-	host->map_irq = of_irq_parse_and_map_pci;
+	host->map_irq = mt7621_map_irq;
 	host->swizzle_irq = pci_common_swizzle;
 	host->sysdata = pcie;
 
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2020-06-18  1:17 UTC|newest]

Thread overview: 74+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20200618010805.600873-1-sashal@kernel.org>
2020-06-18  1:01 ` [PATCH AUTOSEL 5.7 003/388] clk: sunxi: Fix incorrect usage of round_down() Sasha Levin
2020-06-18  1:01 ` [PATCH AUTOSEL 5.7 007/388] ASoC: SOF: imx8: Fix randbuild error Sasha Levin
2020-06-18  1:01 ` [PATCH AUTOSEL 5.7 017/388] ARM: integrator: Add some Kconfig selections Sasha Levin
2020-06-18  1:01 ` [PATCH AUTOSEL 5.7 018/388] ARM: dts: stm32: Add missing ethernet PHY reset on AV96 Sasha Levin
2020-06-18  1:01 ` [PATCH AUTOSEL 5.7 021/388] arm64: dts: meson-gxbb-kii-pro: fix board compatible Sasha Levin
2020-06-18  1:02 ` [PATCH AUTOSEL 5.7 024/388] arm64: dts: meson: fixup SCP sram nodes Sasha Levin
2020-06-18  1:02 ` [PATCH AUTOSEL 5.7 031/388] PCI: brcmstb: Fix window register offset from 4 to 8 Sasha Levin
2020-06-18  1:02 ` [PATCH AUTOSEL 5.7 039/388] clk: samsung: Mark top ISP and CAM clocks on Exynos542x as critical Sasha Levin
2020-06-18  1:02 ` [PATCH AUTOSEL 5.7 042/388] usb: roles: Switch on role-switch uevent reporting Sasha Levin
2020-06-18  1:02 ` [PATCH AUTOSEL 5.7 043/388] serial: 8250: Fix max baud limit in generic 8250 port Sasha Levin
2020-06-18  1:02 ` [PATCH AUTOSEL 5.7 048/388] arm64: dts: armada-3720-turris-mox: forbid SDR104 on SDIO for FCC purposes Sasha Levin
2020-06-18  1:02 ` [PATCH AUTOSEL 5.7 049/388] arm64: dts: armada-3720-turris-mox: fix SFP binding Sasha Levin
2020-06-18  1:02 ` [PATCH AUTOSEL 5.7 050/388] arm64: dts: juno: Fix GIC child nodes Sasha Levin
2020-06-18  1:02 ` [PATCH AUTOSEL 5.7 056/388] arm64: dts: fvp: " Sasha Levin
2020-06-18  1:02 ` [PATCH AUTOSEL 5.7 057/388] PCI: aardvark: Don't blindly enable ASPM L0s and don't write to read-only register Sasha Levin
2020-06-18  1:02 ` [PATCH AUTOSEL 5.7 059/388] arm64: dts: fvp/juno: Fix node address fields Sasha Levin
2020-06-18  1:02 ` [PATCH AUTOSEL 5.7 062/388] coresight: tmc: Fix TMC mode read in tmc_read_prepare_etb() Sasha Levin
2020-06-18  1:02 ` [PATCH AUTOSEL 5.7 075/388] clk: zynqmp: fix memory leak in zynqmp_register_clocks Sasha Levin
2020-06-18  1:03 ` [PATCH AUTOSEL 5.7 089/388] clk: sprd: fix compile-testing Sasha Levin
2020-06-18  1:03 ` [PATCH AUTOSEL 5.7 094/388] ASoC: meson: fix memory leak of links if allocation of ldata fails Sasha Levin
2020-06-18  1:03 ` [PATCH AUTOSEL 5.7 103/388] ASoC: meson: add missing free_irq() in error path Sasha Levin
2020-06-18  1:03 ` [PATCH AUTOSEL 5.7 108/388] media: s5p-mfc: Properly handle dma_parms for the allocated devices Sasha Levin
2020-06-18  1:03 ` [PATCH AUTOSEL 5.7 114/388] ARM: dts: bcm283x: Use firmware PM driver for V3D Sasha Levin
2020-06-18  1:03 ` [PATCH AUTOSEL 5.7 115/388] arm64: dts: realtek: rtd129x: Fix GIC CPU masks for RTD1293 Sasha Levin
2020-06-18  1:03 ` Sasha Levin [this message]
2020-06-18  1:03 ` [PATCH AUTOSEL 5.7 119/388] arm64: dts: mt8173: fix unit name warnings Sasha Levin
2020-06-18  1:03 ` [PATCH AUTOSEL 5.7 122/388] ARM: dts: sun8i-h2-plus-bananapi-m2-zero: Fix led polarity Sasha Levin
2020-06-18  1:04 ` [PATCH AUTOSEL 5.7 151/388] clk: meson: meson8b: Fix the first parent of vid_pll_in_sel Sasha Levin
2020-06-18  1:04 ` [PATCH AUTOSEL 5.7 152/388] clk: meson: meson8b: Fix the polarity of the RESET_N lines Sasha Levin
2020-06-18  1:04 ` [PATCH AUTOSEL 5.7 153/388] clk: meson: meson8b: Fix the vclk_div{1, 2, 4, 6, 12}_en gate bits Sasha Levin
2020-06-18  1:04 ` [PATCH AUTOSEL 5.7 158/388] arm64: dts: meson-g12b-ugoos-am6: fix board compatible Sasha Levin
2020-06-18  1:04 ` [PATCH AUTOSEL 5.7 159/388] arm64: dts: meson: fix leds subnodes name Sasha Levin
2020-06-18  1:04 ` [PATCH AUTOSEL 5.7 161/388] clk: meson: meson8b: Don't rely on u-boot to init all GP_PLL registers Sasha Levin
2020-06-18  1:04 ` [PATCH AUTOSEL 5.7 164/388] ARM: dts: aspeed: ast2600: Set arch timer always-on Sasha Levin
2020-06-18  1:04 ` [PATCH AUTOSEL 5.7 165/388] ARM: dts: aspeed: Change KCS nodes to v2 binding Sasha Levin
2020-06-18  1:04 ` [PATCH AUTOSEL 5.7 168/388] usb: dwc3: meson-g12a: check return of dwc3_meson_g12a_usb_init Sasha Levin
2020-06-18  1:04 ` [PATCH AUTOSEL 5.7 182/388] PCI: brcmstb: Assert fundamental reset on initialization Sasha Levin
2020-06-18  1:04 ` [PATCH AUTOSEL 5.7 184/388] remoteproc/mediatek: fix invalid use of sizeof in scp_ipi_init() Sasha Levin
2020-06-18  1:04 ` [PATCH AUTOSEL 5.7 196/388] pinctrl: rockchip: fix memleak in rockchip_dt_node_to_map Sasha Levin
2020-06-18  1:05 ` [PATCH AUTOSEL 5.7 214/388] arm64: dts: marvell: armada-37xx: Set pcie_reset_pin to gpio function Sasha Levin
2020-06-18  1:05 ` [PATCH AUTOSEL 5.7 221/388] PCI: aardvark: Train link immediately after enabling training Sasha Levin
2020-06-18  1:05 ` [PATCH AUTOSEL 5.7 222/388] PCI: aardvark: Improve link training Sasha Levin
2020-06-18  1:05 ` [PATCH AUTOSEL 5.7 223/388] PCI: aardvark: Issue PERST via GPIO Sasha Levin
2020-06-18  1:05 ` [PATCH AUTOSEL 5.7 227/388] iommu/arm-smmu-v3: Don't reserve implementation defined register space Sasha Levin
2020-06-18  1:05 ` [PATCH AUTOSEL 5.7 229/388] usb/ohci-platform: Fix a warning when hibernating Sasha Levin
2020-06-18  9:56   ` Qais Yousef
2020-06-18  1:05 ` [PATCH AUTOSEL 5.7 235/388] coresight: Fix support for sparsely populated ports Sasha Levin
2020-06-18  1:05 ` [PATCH AUTOSEL 5.7 236/388] coresight: etm4x: Fix use-after-free of per-cpu etm drvdata Sasha Levin
2020-06-18  1:05 ` [PATCH AUTOSEL 5.7 238/388] clk: samsung: exynos5433: Add IGNORE_UNUSED flag to sclk_i2s1 Sasha Levin
2020-06-18  1:05 ` [PATCH AUTOSEL 5.7 239/388] ARM: dts: meson: Switch existing boards with RGMII PHY to "rgmii-id" Sasha Levin
2020-06-18  1:05 ` [PATCH AUTOSEL 5.7 244/388] firmware: imx: scu: Fix possible memory leak in imx_scu_probe() Sasha Levin
2020-06-18  1:05 ` [PATCH AUTOSEL 5.7 259/388] PCI: amlogic: meson: Don't use FAST_LINK_MODE to set up link Sasha Levin
2020-06-18  1:06 ` [PATCH AUTOSEL 5.7 266/388] usb: gadget: lpc32xx_udc: don't dereference ep pointer before null check Sasha Levin
2020-06-18  1:06 ` [PATCH AUTOSEL 5.7 269/388] pinctrl: Fix return value about devm_platform_ioremap_resource() Sasha Levin
2020-06-18  1:06 ` [PATCH AUTOSEL 5.7 273/388] mfd: stmfx: Reset chip on resume as supply was disabled Sasha Levin
2020-06-18  1:06 ` [PATCH AUTOSEL 5.7 274/388] mfd: stmfx: Fix stmfx_irq_init error path Sasha Levin
2020-06-18  1:06 ` [PATCH AUTOSEL 5.7 275/388] mfd: stmfx: Disable IRQ in suspend to avoid spurious interrupt Sasha Levin
2020-06-18  1:06 ` [PATCH AUTOSEL 5.7 282/388] clk: bcm2835: Fix return type of bcm2835_register_gate Sasha Levin
2020-06-18  1:06 ` [PATCH AUTOSEL 5.7 284/388] clk: zynqmp: Fix divider2 calculation Sasha Levin
2020-06-18  1:06 ` [PATCH AUTOSEL 5.7 292/388] misc: xilinx-sdfec: improve get_user_pages_fast() error handling Sasha Levin
2020-06-18  1:06 ` [PATCH AUTOSEL 5.7 300/388] ARM: davinci: fix build failure without I2C Sasha Levin
2020-06-18  1:06 ` [PATCH AUTOSEL 5.7 305/388] usb: dwc3: meson-g12a: fix error path when fetching the reset line fails Sasha Levin
2020-06-18  1:06 ` [PATCH AUTOSEL 5.7 310/388] mailbox: imx: Fix return in imx_mu_scu_xlate() Sasha Levin
2020-06-18  1:06 ` [PATCH AUTOSEL 5.7 311/388] mailbox: zynqmp-ipi: Fix NULL vs IS_ERR() check in zynqmp_ipi_mbox_probe() Sasha Levin
2020-06-18  1:06 ` [PATCH AUTOSEL 5.7 317/388] pwm: imx27: Fix rounding behavior Sasha Levin
2020-06-18  1:06 ` [PATCH AUTOSEL 5.7 321/388] scsi: ufs: Don't update urgent bkops level when toggling auto bkops Sasha Levin
2020-06-18  1:07 ` [PATCH AUTOSEL 5.7 323/388] pinctrl: imxl: Fix an error handling path in 'imx1_pinctrl_core_probe()' Sasha Levin
2020-06-18  1:07 ` [PATCH AUTOSEL 5.7 324/388] pinctrl: sirf: add missing put_device() call in sirfsoc_gpio_probe() Sasha Levin
2020-06-18  1:07 ` [PATCH AUTOSEL 5.7 325/388] pinctrl: freescale: imx: Fix an error handling path in 'imx_pinctrl_probe()' Sasha Levin
2020-06-18  1:07 ` [PATCH AUTOSEL 5.7 326/388] pinctrl: freescale: imx: Use 'devm_of_iomap()' to avoid a resource leak in case of error " Sasha Levin
2020-06-18  1:07 ` [PATCH AUTOSEL 5.7 356/388] mailbox: imx: Add context save/restore for suspend/resume Sasha Levin
2020-06-18  1:07 ` [PATCH AUTOSEL 5.7 357/388] arm64: ftrace: Change CONFIG_FTRACE_WITH_REGS to CONFIG_DYNAMIC_FTRACE_WITH_REGS Sasha Levin
2020-06-18  1:07 ` [PATCH AUTOSEL 5.7 370/388] drm/sun4i: hdmi ddc clk: Fix size of m divider Sasha Levin
2020-06-18  1:07 ` [PATCH AUTOSEL 5.7 372/388] scsi: acornscsi: Fix an error handling path in acornscsi_probe() Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200618010805.600873-118-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=devel@driverdev.osuosl.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=sergio.paracuellos@gmail.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).