linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: Ahmad Fatoum <a.fatoum@pengutronix.de>
Cc: Stephen Boyd <sboyd@kernel.org>,
	Michael Turquette <mturquette@baylibre.com>,
	linux-kernel@vger.kernel.org,
	Ludovic Desroches <ludovic.desroches@microchip.com>,
	kernel@pengutronix.de, linux-clk@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH] clk: at91: fix possible dead lock in new drivers
Date: Fri, 3 Jul 2020 10:58:55 +0200	[thread overview]
Message-ID: <20200703085855.GD6538@piout.net> (raw)
In-Reply-To: <20200703073236.23923-1-a.fatoum@pengutronix.de>

On 03/07/2020 09:32:35+0200, Ahmad Fatoum wrote:
> syscon_node_to_regmap() will make the created regmap get and enable the
> first clock it can parse from the device tree. This clock is not needed to
> access the registers and should not be enabled at that time.
> 
> Use device_node_to_regmap to resolve this as it looks up the regmap in
> the same list but doesn't care about the clocks. This issue is detected
> by lockdep when booting the sama5d3 with a device tree containing the
> new clk bindings.
> 
> This fix already happened in 6956eb33abb5 ("clk: at91: fix possible
> deadlock") for the drivers that had been migrated to the new clk binding
> back then. This does the same for the new drivers as well.
> 
> Fixes: 01e2113de9a5 ("clk: at91: add sam9x60 pmc driver")
> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

> ---
> Only boot tested on the sama5d3.
> ---
>  drivers/clk/at91/at91sam9g45.c | 2 +-
>  drivers/clk/at91/at91sam9n12.c | 2 +-
>  drivers/clk/at91/sam9x60.c     | 2 +-
>  drivers/clk/at91/sama5d3.c     | 2 +-
>  4 files changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/clk/at91/at91sam9g45.c b/drivers/clk/at91/at91sam9g45.c
> index 9873b583c260..fe9d391adeba 100644
> --- a/drivers/clk/at91/at91sam9g45.c
> +++ b/drivers/clk/at91/at91sam9g45.c
> @@ -111,7 +111,7 @@ static void __init at91sam9g45_pmc_setup(struct device_node *np)
>  		return;
>  	mainxtal_name = of_clk_get_parent_name(np, i);
>  
> -	regmap = syscon_node_to_regmap(np);
> +	regmap = device_node_to_regmap(np);
>  	if (IS_ERR(regmap))
>  		return;
>  
> diff --git a/drivers/clk/at91/at91sam9n12.c b/drivers/clk/at91/at91sam9n12.c
> index 630dc5d87171..4aa97e672bd6 100644
> --- a/drivers/clk/at91/at91sam9n12.c
> +++ b/drivers/clk/at91/at91sam9n12.c
> @@ -124,7 +124,7 @@ static void __init at91sam9n12_pmc_setup(struct device_node *np)
>  		return;
>  	mainxtal_name = of_clk_get_parent_name(np, i);
>  
> -	regmap = syscon_node_to_regmap(np);
> +	regmap = device_node_to_regmap(np);
>  	if (IS_ERR(regmap))
>  		return;
>  
> diff --git a/drivers/clk/at91/sam9x60.c b/drivers/clk/at91/sam9x60.c
> index 3e20aa68259f..2b4c67485eee 100644
> --- a/drivers/clk/at91/sam9x60.c
> +++ b/drivers/clk/at91/sam9x60.c
> @@ -178,7 +178,7 @@ static void __init sam9x60_pmc_setup(struct device_node *np)
>  		return;
>  	mainxtal_name = of_clk_get_parent_name(np, i);
>  
> -	regmap = syscon_node_to_regmap(np);
> +	regmap = device_node_to_regmap(np);
>  	if (IS_ERR(regmap))
>  		return;
>  
> diff --git a/drivers/clk/at91/sama5d3.c b/drivers/clk/at91/sama5d3.c
> index 5e4e44dd4c37..5609b04e6565 100644
> --- a/drivers/clk/at91/sama5d3.c
> +++ b/drivers/clk/at91/sama5d3.c
> @@ -121,7 +121,7 @@ static void __init sama5d3_pmc_setup(struct device_node *np)
>  		return;
>  	mainxtal_name = of_clk_get_parent_name(np, i);
>  
> -	regmap = syscon_node_to_regmap(np);
> +	regmap = device_node_to_regmap(np);
>  	if (IS_ERR(regmap))
>  		return;
>  
> -- 
> 2.27.0
> 

-- 
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2020-07-03  9:00 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-03  7:32 [PATCH] clk: at91: fix possible dead lock in new drivers Ahmad Fatoum
2020-07-03  8:58 ` Alexandre Belloni [this message]
2020-07-24  9:25 ` Stephen Boyd

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200703085855.GD6538@piout.net \
    --to=alexandre.belloni@bootlin.com \
    --cc=a.fatoum@pengutronix.de \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=ludovic.desroches@microchip.com \
    --cc=mturquette@baylibre.com \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).