From: Fabio Estevam <festevam@gmail.com>
To: shawnguo@kernel.org
Cc: smoch@web.de, Fabio Estevam <festevam@gmail.com>,
linux-imx@nxp.com, linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 1/2] ARM: dts: imx6q-tbs2910: Add an mdio node
Date: Mon, 13 Jul 2020 10:05:08 -0300 [thread overview]
Message-ID: <20200713130509.20105-1-festevam@gmail.com> (raw)
imx6q-tbs2910 has an Atheros AR8035 Ethernet PHY at address 4.
The AR8035 provides a 125MHz clock to the ENET_REF_CLK i.MX6 pin.
Improve the Ethernet representation by adding an mdio node with such
information.
This fixes an Ethernet regression in U-Boot as U-Boot AR803X driver now
expects the 'qca,clk-out-frequency' property to be passed via
device tree.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
Changes since v2:
- None. Only reorded the patches.
arch/arm/boot/dts/imx6q-tbs2910.dts | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts
index bfff87ce2e1f..1f34028c6397 100644
--- a/arch/arm/boot/dts/imx6q-tbs2910.dts
+++ b/arch/arm/boot/dts/imx6q-tbs2910.dts
@@ -100,7 +100,18 @@
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii-id";
phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+ phy-handle = <&phy>;
status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy: ethernet-phy@4 {
+ reg = <4>;
+ qca,clk-out-frequency = <125000000>;
+ };
+ };
};
&hdmi {
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2020-07-13 13:07 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-13 13:05 Fabio Estevam [this message]
2020-07-13 13:05 ` [PATCH v3 2/2] ARM: dts: imx6q-tbs2910: Pass reset-assert-us Fabio Estevam
2020-07-14 9:48 ` Sören Moch
2020-07-20 2:22 ` Shawn Guo
2020-07-14 9:46 ` [PATCH v3 1/2] ARM: dts: imx6q-tbs2910: Add an mdio node Soeren Moch
2020-07-20 2:22 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200713130509.20105-1-festevam@gmail.com \
--to=festevam@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=shawnguo@kernel.org \
--cc=smoch@web.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).