linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Valentin Schneider <valentin.schneider@arm.com>
To: linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Cc: Marc Zyngier <maz@kernel.org>,
	Thomas Gleixner <tglx@linutronix.de>,
	Lorenzo Pieralisi <Lorenzo.Pieralisi@arm.com>,
	Jason Cooper <jason@lakedaemon.net>
Subject: [PATCH v2 1/2] irqchip/gic-v2, v3: Implement irq_chip->irq_retrigger()
Date: Thu, 30 Jul 2020 18:03:20 +0100	[thread overview]
Message-ID: <20200730170321.31228-2-valentin.schneider@arm.com> (raw)
In-Reply-To: <20200730170321.31228-1-valentin.schneider@arm.com>

While digging around IRQCHIP_EOI_IF_HANDLED and irq/resend.c, it has come
to my attention that the IRQ resend situation seems a bit precarious for
the GIC(s).

When marking an IRQ with IRQS_PENDING, handle_fasteoi_irq() will bail out
and issue an irq_eoi(). Should the IRQ in question be re-enabled,
check_irq_resend() will trigger a SW resend, which will go through the flow
handler again and issue *another* irq_eoi() on the *same* IRQ
activation. This is something the GIC spec clearly describes as a bad idea:
any EOI must match a previous ACK.

Implement irq_chip.irq_retrigger() for the GIC chips by setting the GIC
pending bit of the relevant IRQ. After being called by check_irq_resend(),
this will eventually trigger a *new* interrupt which we will handle as usual.

Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
---
 drivers/irqchip/irq-gic-v3.c | 7 +++++++
 drivers/irqchip/irq-gic.c    | 6 ++++++
 2 files changed, 13 insertions(+)

diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
index cc46bc2d634b..0fbcbf55ec48 100644
--- a/drivers/irqchip/irq-gic-v3.c
+++ b/drivers/irqchip/irq-gic-v3.c
@@ -1207,6 +1207,11 @@ static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val,
 #define gic_smp_init()		do { } while(0)
 #endif
 
+static int gic_retrigger(struct irq_data *data)
+{
+	return !gic_irq_set_irqchip_state(data, IRQCHIP_STATE_PENDING, true);
+}
+
 #ifdef CONFIG_CPU_PM
 static int gic_cpu_pm_notifier(struct notifier_block *self,
 			       unsigned long cmd, void *v)
@@ -1242,6 +1247,7 @@ static struct irq_chip gic_chip = {
 	.irq_eoi		= gic_eoi_irq,
 	.irq_set_type		= gic_set_type,
 	.irq_set_affinity	= gic_set_affinity,
+	.irq_retrigger          = gic_retrigger,
 	.irq_get_irqchip_state	= gic_irq_get_irqchip_state,
 	.irq_set_irqchip_state	= gic_irq_set_irqchip_state,
 	.irq_nmi_setup		= gic_irq_nmi_setup,
@@ -1258,6 +1264,7 @@ static struct irq_chip gic_eoimode1_chip = {
 	.irq_eoi		= gic_eoimode1_eoi_irq,
 	.irq_set_type		= gic_set_type,
 	.irq_set_affinity	= gic_set_affinity,
+	.irq_retrigger          = gic_retrigger,
 	.irq_get_irqchip_state	= gic_irq_get_irqchip_state,
 	.irq_set_irqchip_state	= gic_irq_set_irqchip_state,
 	.irq_set_vcpu_affinity	= gic_irq_set_vcpu_affinity,
diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
index 00de05abd3c3..e2b4cae88bce 100644
--- a/drivers/irqchip/irq-gic.c
+++ b/drivers/irqchip/irq-gic.c
@@ -355,6 +355,11 @@ static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val,
 }
 #endif
 
+static int gic_retrigger(struct irq_data *data)
+{
+	return !gic_irq_set_irqchip_state(data, IRQCHIP_STATE_PENDING, true);
+}
+
 static void __exception_irq_entry gic_handle_irq(struct pt_regs *regs)
 {
 	u32 irqstat, irqnr;
@@ -425,6 +430,7 @@ static const struct irq_chip gic_chip = {
 	.irq_unmask		= gic_unmask_irq,
 	.irq_eoi		= gic_eoi_irq,
 	.irq_set_type		= gic_set_type,
+	.irq_retrigger          = gic_retrigger,
 	.irq_get_irqchip_state	= gic_irq_get_irqchip_state,
 	.irq_set_irqchip_state	= gic_irq_set_irqchip_state,
 	.flags			= IRQCHIP_SET_TYPE_MASKED |
-- 
2.27.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2020-07-30 17:07 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-30 17:03 [PATCH v2 0/2] irqchip/gic-v2, v3: Enforce ACK/EOI pairing on IRQ retrigger Valentin Schneider
2020-07-30 17:03 ` Valentin Schneider [this message]
2020-07-30 17:03 ` [PATCH v2 2/2] irqchip/gic-v2, v3: Prevent SW resends entirely Valentin Schneider
2020-07-30 18:10   ` Marc Zyngier
2020-07-31  0:08     ` Valentin Schneider
2020-07-31  8:08       ` Marc Zyngier
2020-07-31 11:27         ` Marc Zyngier
2020-07-31 12:11           ` Valentin Schneider

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200730170321.31228-2-valentin.schneider@arm.com \
    --to=valentin.schneider@arm.com \
    --cc=Lorenzo.Pieralisi@arm.com \
    --cc=jason@lakedaemon.net \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maz@kernel.org \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).