From: Krzysztof Kozlowski <krzk@kernel.org>
To: Rob Herring <robh+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
NXP Linux Team <linux-imx@nxp.com>,
Anson Huang <Anson.Huang@nxp.com>, Li Yang <leoyang.li@nxp.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 4/4] arm64: dts: imx8mm-var-som-symphony: Add Variscite Symphony board with VAR-SOM-MX8MM
Date: Tue, 11 Aug 2020 17:52:32 +0200 [thread overview]
Message-ID: <20200811155232.GA5960@kozik-lap> (raw)
In-Reply-To: <20200811153916.5455-4-krzk@kernel.org>
On Tue, Aug 11, 2020 at 05:39:16PM +0200, Krzysztof Kozlowski wrote:
> Add a DTS for Variscite Symphony evaluation kit with VAR-SOM-MX8MM
> System on Module.
>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
> arch/arm64/boot/dts/freescale/Makefile | 1 +
> .../dts/freescale/imx8mm-var-som-symphony.dts | 244 ++++++++++++++++++
> 2 files changed, 245 insertions(+)
> create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts
>
> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index a39f0a1723e0..dcfb8750cd78 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -29,6 +29,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb
>
> dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
> +dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts
> new file mode 100644
> index 000000000000..5bfb650a04cc
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts
> @@ -0,0 +1,244 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (C) 2020 Krzysztof Kozlowski <krzk@kernel.org>
> + */
> +
> +/dts-v1/;
> +
> +#include "imx8mm-var-som.dtsi"
> +
> +/ {
> + model = "Variscite VAR-SOM-MX8MM Symphony evaluation board";
> + compatible = "variscite,var-som-mx8mm-symphony", "variscite,var-som-mx8mm", "fsl,imx8mm";
> +
> + leds {
> + compatible = "gpio-leds";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_gpio_led>;
> +
> + status {
> + label = "status";
> + gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
> + default-state = "on";
> + };
> + };
I just spotted own mistake - this is a left-over and should be removed.
I will send a v2 in few days, maybe after initial feedback.
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
prev parent reply other threads:[~2020-08-11 15:54 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-11 15:39 [PATCH 1/4] dt-bindings: arm: fsl: Add binding for Variscite VAR-SOM-MX8MM module Krzysztof Kozlowski
2020-08-11 15:39 ` [PATCH 2/4] dt-bindings: arm: fsl: Add binding for Variscite Symphony board with VAR-SOM-MX8MM Krzysztof Kozlowski
2020-08-11 15:39 ` [PATCH 3/4] arm64: dts: imx8mm-var-som: Add Variscite VAR-SOM-MX8MM System on Module Krzysztof Kozlowski
2020-08-11 15:39 ` [PATCH 4/4] arm64: dts: imx8mm-var-som-symphony: Add Variscite Symphony board with VAR-SOM-MX8MM Krzysztof Kozlowski
2020-08-11 15:52 ` Krzysztof Kozlowski [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200811155232.GA5960@kozik-lap \
--to=krzk@kernel.org \
--cc=Anson.Huang@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).