From: Frank Wunderlich <linux@fw-web.de>
To: linux-mediatek@lists.infradead.org
Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>,
Ryder Lee <ryder.lee@mediatek.com>,
Daniel Vetter <daniel@ffwll.ch>,
Frank Wunderlich <frank-w@public-files.de>,
David Airlie <airlied@linux.ie>,
chunhui dai <chunhui.dai@mediatek.com>,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
Philipp Zabel <p.zabel@pengutronix.de>,
Matthias Brugger <matthias.bgg@gmail.com>,
Bibby Hsieh <bibby.hsieh@mediatek.com>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 7/7] arm: dts: mt7623: add display subsystem related device nodes
Date: Wed, 19 Aug 2020 10:17:52 +0200 [thread overview]
Message-ID: <20200819081752.4805-8-linux@fw-web.de> (raw)
In-Reply-To: <20200819081752.4805-1-linux@fw-web.de>
From: Ryder Lee <ryder.lee@mediatek.com>
Add display subsystem related device nodes for MT7623.
Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
---
changed
v4->v5:
add nodes to new mt7623n.dtsi to avoid conflict with mt7623a
v3->v4:
drop display_components which is duplicate of existing mmsys
v2->v3:
drop bls to dpi routing
---
arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 72 ++++++++
arch/arm/boot/dts/mt7623n-rfb-emmc.dts | 72 ++++++++
arch/arm/boot/dts/mt7623n.dtsi | 171 ++++++++++++++++++
3 files changed, 315 insertions(+)
diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
index 344f8c65c4aa..f41f221e56ca 100644
--- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
@@ -21,6 +21,19 @@ chosen {
stdout-path = "serial2:115200n8";
};
+ connector {
+ compatible = "hdmi-connector";
+ label = "hdmi";
+ type = "d";
+ ddc-i2c-bus = <&hdmiddc0>;
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi0_out>;
+ };
+ };
+ };
+
cpus {
cpu@0 {
proc-supply = <&mt6323_vproc_reg>;
@@ -114,10 +127,18 @@ memory@80000000 {
};
};
+&bls {
+ status = "okay";
+};
+
&btif {
status = "okay";
};
+&cec {
+ status = "okay";
+};
+
&cir {
pinctrl-names = "default";
pinctrl-0 = <&cir_pins_a>;
@@ -128,6 +149,21 @@ &crypto {
status = "okay";
};
+&dpi0 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ dpi0_out: endpoint {
+ remote-endpoint = <&hdmi0_in>;
+ };
+ };
+ };
+};
+
ð {
status = "okay";
@@ -199,6 +235,42 @@ fixed-link {
};
};
+&hdmi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_pins_a>;
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ hdmi0_in: endpoint {
+ remote-endpoint = <&dpi0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ hdmi0_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+};
+
+&hdmiddc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_ddc_pins_a>;
+ status = "okay";
+};
+
+&hdmi_phy {
+ mediatek,ibias = <0xa>;
+ mediatek,ibias_up = <0x1c>;
+ status = "okay";
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
diff --git a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
index f8efcc364bc3..1b9b9a8145a7 100644
--- a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
+++ b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
@@ -24,6 +24,19 @@ chosen {
stdout-path = "serial2:115200n8";
};
+ connector {
+ compatible = "hdmi-connector";
+ label = "hdmi";
+ type = "d";
+ ddc-i2c-bus = <&hdmiddc0>;
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi0_out>;
+ };
+ };
+ };
+
cpus {
cpu@0 {
proc-supply = <&mt6323_vproc_reg>;
@@ -106,10 +119,18 @@ sound {
};
};
+&bls {
+ status = "okay";
+};
+
&btif {
status = "okay";
};
+&cec {
+ status = "okay";
+};
+
&cir {
pinctrl-names = "default";
pinctrl-0 = <&cir_pins_a>;
@@ -120,6 +141,21 @@ &crypto {
status = "okay";
};
+&dpi0 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ dpi0_out: endpoint {
+ remote-endpoint = <&hdmi0_in>;
+ };
+ };
+ };
+};
+
ð {
status = "okay";
@@ -203,6 +239,42 @@ fixed-link {
};
};
+&hdmi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_pins_a>;
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ hdmi0_in: endpoint {
+ remote-endpoint = <&dpi0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ hdmi0_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+};
+
+&hdmiddc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_ddc_pins_a>;
+ status = "okay";
+};
+
+&hdmi_phy {
+ mediatek,ibias = <0xa>;
+ mediatek,ibias_up = <0x1c>;
+ status = "okay";
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
diff --git a/arch/arm/boot/dts/mt7623n.dtsi b/arch/arm/boot/dts/mt7623n.dtsi
index a47e82468895..61545fc541c4 100644
--- a/arch/arm/boot/dts/mt7623n.dtsi
+++ b/arch/arm/boot/dts/mt7623n.dtsi
@@ -10,6 +10,10 @@
#include <dt-bindings/memory/mt2701-larb-port.h>
/ {
+ aliases {
+ rdma0 = &rdma0;
+ rdma1 = &rdma1;
+ };
g3dsys: syscon@13000000 {
compatible = "mediatek,mt7623-g3dsys",
"mediatek,mt2701-g3dsys",
@@ -131,4 +135,171 @@ smi_common: smi@1000c000 {
clock-names = "apb", "smi", "async";
power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
};
+
+ ovl: ovl@14007000 {
+ compatible = "mediatek,mt7623-disp-ovl",
+ "mediatek,mt2701-disp-ovl";
+ reg = <0 0x14007000 0 0x1000>;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_DISP_OVL>;
+ iommus = <&iommu MT2701_M4U_PORT_DISP_OVL_0>;
+ mediatek,larb = <&larb0>;
+ };
+
+ rdma0: rdma@14008000 {
+ compatible = "mediatek,mt7623-disp-rdma",
+ "mediatek,mt2701-disp-rdma";
+ reg = <0 0x14008000 0 0x1000>;
+ interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_DISP_RDMA>;
+ iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA>;
+ mediatek,larb = <&larb0>;
+ };
+
+ wdma@14009000 {
+ compatible = "mediatek,mt7623-disp-wdma",
+ "mediatek,mt2701-disp-wdma";
+ reg = <0 0x14009000 0 0x1000>;
+ interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_DISP_WDMA>;
+ iommus = <&iommu MT2701_M4U_PORT_DISP_WDMA>;
+ mediatek,larb = <&larb0>;
+ };
+
+ bls: pwm@1400a000 {
+ compatible = "mediatek,mt7623-disp-pwm",
+ "mediatek,mt2701-disp-pwm";
+ reg = <0 0x1400a000 0 0x1000>;
+ #pwm-cells = <2>;
+ clocks = <&mmsys CLK_MM_MDP_BLS_26M>,
+ <&mmsys CLK_MM_DISP_BLS>;
+ clock-names = "main", "mm";
+ status = "disabled";
+ };
+
+ color: color@1400b000 {
+ compatible = "mediatek,mt7623-disp-color",
+ "mediatek,mt2701-disp-color";
+ reg = <0 0x1400b000 0 0x1000>;
+ interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_DISP_COLOR>;
+ };
+
+ dsi: dsi@1400c000 {
+ compatible = "mediatek,mt7623-dsi",
+ "mediatek,mt2701-dsi";
+ reg = <0 0x1400c000 0 0x1000>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_DSI_ENGINE>,
+ <&mmsys CLK_MM_DSI_DIG>,
+ <&mipi_tx0>;
+ clock-names = "engine", "digital", "hs";
+ phys = <&mipi_tx0>;
+ phy-names = "dphy";
+ status = "disabled";
+ };
+
+ mutex: mutex@1400e000 {
+ compatible = "mediatek,mt7623-disp-mutex",
+ "mediatek,mt2701-disp-mutex";
+ reg = <0 0x1400e000 0 0x1000>;
+ interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_MUTEX_32K>;
+ };
+
+ rdma1: rdma@14012000 {
+ compatible = "mediatek,mt7623-disp-rdma",
+ "mediatek,mt2701-disp-rdma";
+ reg = <0 0x14012000 0 0x1000>;
+ interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_DISP_RDMA1>;
+ iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA1>;
+ mediatek,larb = <&larb0>;
+ };
+
+ dpi0: dpi@14014000 {
+ compatible = "mediatek,mt7623-dpi",
+ "mediatek,mt2701-dpi";
+ reg = <0 0x14014000 0 0x1000>;
+ interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_DPI1_DIGL>,
+ <&mmsys CLK_MM_DPI1_ENGINE>,
+ <&apmixedsys CLK_APMIXED_TVDPLL>;
+ clock-names = "pixel", "engine", "pll";
+ status = "disabled";
+ };
+
+ hdmi0: hdmi@14015000 {
+ compatible = "mediatek,mt7623-hdmi",
+ "mediatek,mt8173-hdmi";
+ reg = <0 0x14015000 0 0x400>;
+ clocks = <&mmsys CLK_MM_HDMI_PIXEL>,
+ <&mmsys CLK_MM_HDMI_PLL>,
+ <&mmsys CLK_MM_HDMI_AUDIO>,
+ <&mmsys CLK_MM_HDMI_SPDIF>;
+ clock-names = "pixel", "pll", "bclk", "spdif";
+ phys = <&hdmi_phy>;
+ phy-names = "hdmi";
+ mediatek,syscon-hdmi = <&mmsys 0x900>;
+ cec = <&cec>;
+ status = "disabled";
+ };
+
+ mipi_tx0: mipi-dphy@10010000 {
+ compatible = "mediatek,mt7623-mipi-tx",
+ "mediatek,mt2701-mipi-tx";
+ reg = <0 0x10010000 0 0x90>;
+ clocks = <&clk26m>;
+ clock-output-names = "mipi_tx0_pll";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+ };
+
+ cec: cec@10012000 {
+ compatible = "mediatek,mt7623-cec",
+ "mediatek,mt8173-cec";
+ reg = <0 0x10012000 0 0xbc>;
+ interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_CEC>;
+ status = "disabled";
+ };
+
+ hdmi_phy: phy@10209100 {
+ compatible = "mediatek,mt7623-hdmi-phy",
+ "mediatek,mt2701-hdmi-phy";
+ reg = <0 0x10209100 0 0x24>;
+ clocks = <&apmixedsys CLK_APMIXED_HDMI_REF>;
+ clock-names = "pll_ref";
+ clock-output-names = "hdmitx_dig_cts";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ hdmiddc0: i2c@11013000 {
+ compatible = "mediatek,mt7623-hdmi-ddc",
+ "mediatek,mt8173-hdmi-ddc";
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>;
+ reg = <0 0x11013000 0 0x1C>;
+ clocks = <&pericfg CLK_PERI_I2C3>;
+ clock-names = "ddc-i2c";
+ status = "disabled";
+ };
+};
+
+&pio {
+ hdmi_pins_a: hdmi-default {
+ pins-hdmi {
+ pinmux = <MT7623_PIN_123_HTPLG_FUNC_HTPLG>;
+ input-enable;
+ bias-pull-down;
+ };
+ };
+
+ hdmi_ddc_pins_a: hdmi_ddc-default {
+ pins-hdmi-ddc {
+ pinmux = <MT7623_PIN_124_GPIO124_FUNC_HDMISCK>,
+ <MT7623_PIN_125_GPIO125_FUNC_HDMISD>;
+ };
+ };
};
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-08-19 8:20 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-19 8:17 [PATCH v5 0/7] make hdmi work on bananapi-r2 Frank Wunderlich
2020-08-19 8:17 ` [PATCH v5 1/7] dt-bindings: mediatek: add mt7623 display-nodes Frank Wunderlich
2020-08-27 23:31 ` Chun-Kuang Hu
2020-08-19 8:17 ` [PATCH v5 2/7] drm/mediatek: add ddp routing for mt7623 Frank Wunderlich
2020-08-27 23:32 ` Chun-Kuang Hu
2020-08-19 8:17 ` [PATCH v5 3/7] drm/mediatek: disable tmds on mt2701 Frank Wunderlich
2020-08-19 17:12 ` Matthias Brugger
2020-08-19 19:04 ` Frank Wunderlich
2020-08-21 11:13 ` Aw: " Frank Wunderlich
2020-08-21 7:17 ` Aw: " Frank Wunderlich
2020-08-27 8:15 ` Matthias Brugger
2020-08-27 13:41 ` Aw: " Frank Wunderlich
2020-08-27 14:28 ` Matthias Brugger
2020-08-27 23:46 ` Chun-Kuang Hu
2020-08-28 5:21 ` Frank Wunderlich
2020-08-28 17:45 ` Matthias Brugger
2020-08-19 8:17 ` [PATCH v5 4/7] drm/mediatek: Add get_possible_crtc API for dpi, dsi Frank Wunderlich
2020-08-19 8:17 ` [PATCH v5 5/7] drm/mediatek: dpi/dsi: change the getting possible_crtc way Frank Wunderlich
2020-08-19 17:14 ` Matthias Brugger
2020-08-27 23:34 ` Chun-Kuang Hu
2020-08-19 8:17 ` [PATCH v5 6/7] arm: dts: mt7623: move display nodes to separate mt7623n.dtsi Frank Wunderlich
2020-09-09 9:29 ` Matthias Brugger
2020-09-09 9:35 ` Matthias Brugger
2020-08-19 8:17 ` Frank Wunderlich [this message]
2020-09-09 9:29 ` [PATCH v5 7/7] arm: dts: mt7623: add display subsystem related device nodes Matthias Brugger
2020-08-26 15:52 ` [PATCH v5 0/7] make hdmi work on bananapi-r2 Frank Wunderlich
2020-09-03 15:07 ` Frank Wunderlich
2020-09-03 22:54 ` Chun-Kuang Hu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200819081752.4805-8-linux@fw-web.de \
--to=linux@fw-web.de \
--cc=airlied@linux.ie \
--cc=bibby.hsieh@mediatek.com \
--cc=chunhui.dai@mediatek.com \
--cc=chunkuang.hu@kernel.org \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=frank-w@public-files.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=p.zabel@pengutronix.de \
--cc=ryder.lee@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).