Re: [PATCH v2 0/5] Add support of SECVIO from SNVS on iMX8q/x

[Shawn Guo <shawnguo@kernel.org>]

On Tue, Aug 18, 2020 at 09:52:02AM +0200, Franck LENORMAND (OSS) wrote:
> Hello,
> 
> Peng was able to do a firt pass of review on my patchset which led to this
> second version. I hope a maintainer will be able to take a look at this
> patchset once rested after all the work they did for 5.9.

@Peng, are you okay with this version?

@Aisheng, have a review on this?

Shawn

> 
> On mar., 2020-07-21 at 17:20 +0200, franck.lenormand@oss.nxp.com wrote:
> > From: Franck LENORMAND <franck.lenormand@oss.nxp.com>
> > 
> > This patchset aims to add support for the SECurity VIOlation (SECVIO) of the
> > SNVS. A secvio is a signal emitted by the SNVS when a hardware attack
> > is detected. On imx8x and imx8q SoC, the SNVS is controlled by the
> > SECO and it is possible to interact with it using the SCU using the SC APIs.
> > 
> > For the driver to communicate with the SNVS via the SCU and the SECO, I had to:
> >  - Add support for exchange of big message with the SCU (needed for
> > imx_scu_irq_get_status)
> >  - Add API to check linux can control the SECVIO (imx_sc_rm_is_resource_owned)
> >  - Add APIs for the driver to read the state of the SECVIO registers of the
> > SNVS and DGO (imx_sc_seco_secvio_enable and imx_sc_seco_secvio_enable).
> > 
> > To check the state of the SECVIO IRQ in the SCU, I added the
> > imx_scu_irq_get_status API.
> > 
> > The secvio driver is designed to receive the IRQ produced by the
> > SNVS in case of hardware attack and notify the status to the
> > audit framework which can be used by the user.
> > 
> > The goal of the driver is to be self suficient but can be extended by the
> > user to perform custom operations on values read (imx_sc_seco_secvio_enable)
> > 
> > v2:
> >  - Removed (firmware: imx: scu-rm: Add Resource Management APIs)
> > 	-> Code required is already present
> >  - Removed (firmware: imx: scu: Support reception of messages of any size)
> > 	-> The imx-scu is already working in fast-ipc mode
> >  - (soc: imx8: Add the SC SECVIO driver):
> > 	- Fixed the warnings reported by kernel test robot
> > 
> > Franck LENORMAND (5):
> >   firmware: imx: scu-seco: Add SEcure Controller APIS
> >   firmware: imx: scu-irq: Add API to retrieve status of IRQ
> >   dt-bindings: firmware: imx-scu: Add SECVIO resource
> >   dt-bindings: arm: imx: Documentation of the SC secvio driver
> >   soc: imx8: Add the SC SECVIO driver
> > 
> >  .../bindings/arm/freescale/fsl,imx-sc-secvio.yaml  |  34 +
> >  drivers/firmware/imx/Makefile                      |   2 +-
> >  drivers/firmware/imx/imx-scu-irq.c                 |  37 +-
> >  drivers/firmware/imx/imx-scu.c                     |   3 +
> >  drivers/firmware/imx/seco.c                        | 275 +++++++
> >  drivers/soc/imx/Kconfig                            |  10 +
> >  drivers/soc/imx/Makefile                           |   1 +
> >  drivers/soc/imx/secvio/Kconfig                     |  10 +
> >  drivers/soc/imx/secvio/Makefile                    |   3 +
> >  drivers/soc/imx/secvio/imx-secvio-audit.c          |  39 +
> >  drivers/soc/imx/secvio/imx-secvio-debugfs.c        | 379 +++++++++
> >  drivers/soc/imx/secvio/imx-secvio-sc-int.h         |  84 ++
> >  drivers/soc/imx/secvio/imx-secvio-sc.c             | 858 +++++++++++++++++++++
> >  include/dt-bindings/firmware/imx/rsrc.h            |   3 +-
> >  include/linux/firmware/imx/ipc.h                   |   1 +
> >  include/linux/firmware/imx/sci.h                   |   5 +
> >  include/linux/firmware/imx/svc/seco.h              |  73 ++
> >  include/soc/imx/imx-secvio-sc.h                    | 177 +++++
> >  18 files changed, 1991 insertions(+), 3 deletions(-)
> >  create mode 100644 Documentation/devicetree/bindings/arm/freescale/fsl,imx-sc-
> > secvio.yaml
> >  create mode 100644 drivers/firmware/imx/seco.c
> >  create mode 100644 drivers/soc/imx/secvio/Kconfig
> >  create mode 100644 drivers/soc/imx/secvio/Makefile
> >  create mode 100644 drivers/soc/imx/secvio/imx-secvio-audit.c
> >  create mode 100644 drivers/soc/imx/secvio/imx-secvio-debugfs.c
> >  create mode 100644 drivers/soc/imx/secvio/imx-secvio-sc-int.h
> >  create mode 100644 drivers/soc/imx/secvio/imx-secvio-sc.c
> >  create mode 100644 include/linux/firmware/imx/svc/seco.h
> >  create mode 100644 include/soc/imx/imx-secvio-sc.h
> > 
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel