Re: [PATCH 7/8] spi: spi-s3c64xx: Increase transfer timeout

[Krzysztof Kozlowski <krzk@kernel.org>]

On Wed, Aug 19, 2020 at 03:39:56PM +0200, Lukasz Stelmach wrote:
> It was <2020-08-19 śro 14:49>, when Krzysztof Kozlowski wrote:
> > On Wed, Aug 19, 2020 at 02:32:07PM +0200, Łukasz Stelmach wrote:
> >> Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
> >
> > Why? Everything works fine and suddenly minimum timeout is 100 ms?
> 
> Actually I am not 100% sure the max() call is required, maybe +30 is
> enough. Definitely some minimum value is required because for small
> tranfers (100s of bytes) ms is 0 after the first assignment.

Sure, just please describe it all in commit msg. All these questions
"why?" came because of lack of explanation in commit msg.

I guess minimum timeout 100 ms for each transfer is quite high, so maybe
just bump the tolerance to 30 which also would be a minimum timeout.

Best regards,
Krzysztof


> 
> >> ---
> >>  drivers/spi/spi-s3c64xx.c | 3 ++-
> >>  1 file changed, 2 insertions(+), 1 deletion(-)
> >> 
> >> diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
> >> index 27d77600a820..27db1e0f6f32 100644
> >> --- a/drivers/spi/spi-s3c64xx.c
> >> +++ b/drivers/spi/spi-s3c64xx.c
> >> @@ -464,7 +464,8 @@ static int s3c64xx_wait_for_dma(struct s3c64xx_spi_driver_data *sdd,
> >>  
> >>  	/* millisecs to xfer 'len' bytes @ 'cur_speed' */
> >>  	ms = xfer->len * 8 * 1000 / sdd->cur_speed;
> >> -	ms += 10; /* some tolerance */
> >> +	ms = (ms * 10) + 30;    /* some tolerance */
> >> +	ms = max(ms, 100);      /* minimum timeout */
> >>  
> >>  	val = msecs_to_jiffies(ms) + 10;
> >>  	val = wait_for_completion_timeout(&sdd->xfer_completion, val);
> >> -- 
> >> 2.26.2
> >> 
> >
> >
> 
> -- 
> Łukasz Stelmach
> Samsung R&D Institute Poland
> Samsung Electronics



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel