[PATCH AUTOSEL 4.19 09/21] spi: stm32: fix stm32_spi_prepare_mbr in case of odd clk_rate

[PATCH AUTOSEL 4.19 09/21] spi: stm32: fix stm32_spi_prepare_mbr in case of odd clk_rate

[Sasha Levin]

From: Amelie Delaunay <amelie.delaunay@st.com>

[ Upstream commit 9cc61973bf9385b19ff5dda4a2a7e265fcba85e4 ]

Fix spi->clk_rate when it is odd to the nearest lowest even value because
minimum SPI divider is 2.

Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alain Volmat <alain.volmat@st.com>
Link: https://lore.kernel.org/r/1597043558-29668-4-git-send-email-alain.volmat@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-stm32.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c
index ad1e55d3d5d59..391a20b3d2fda 100644
--- a/drivers/spi/spi-stm32.c
+++ b/drivers/spi/spi-stm32.c
@@ -254,7 +254,8 @@ static int stm32_spi_prepare_mbr(struct stm32_spi *spi, u32 speed_hz)
 {
 	u32 div, mbrdiv;
 
-	div = DIV_ROUND_UP(spi->clk_rate, speed_hz);
+	/* Ensure spi->clk_rate is even */
+	div = DIV_ROUND_UP(spi->clk_rate & ~0x1, speed_hz);
 
 	/*
 	 * SPI framework set xfer->speed_hz to master->max_speed_hz if
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 4.19 13/21] scsi: ufs: Fix possible infinite loop in ufshcd_hold

[Sasha Levin]

From: Stanley Chu <stanley.chu@mediatek.com>

[ Upstream commit 93b6c5db06028a3b55122bbb74d0715dd8ca4ae0 ]

In ufshcd_suspend(), after clk-gating is suspended and link is set
as Hibern8 state, ufshcd_hold() is still possibly invoked before
ufshcd_suspend() returns. For example, MediaTek's suspend vops may
issue UIC commands which would call ufshcd_hold() during the command
issuing flow.

Now if UFSHCD_CAP_HIBERN8_WITH_CLK_GATING capability is enabled,
then ufshcd_hold() may enter infinite loops because there is no
clk-ungating work scheduled or pending. In this case, ufshcd_hold()
shall just bypass, and keep the link as Hibern8 state.

Link: https://lore.kernel.org/r/20200809050734.18740-1-stanley.chu@mediatek.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Co-developed-by: Andy Teng <andy.teng@mediatek.com>
Signed-off-by: Andy Teng <andy.teng@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ufs/ufshcd.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index bd21c9cdf8183..ff6912f9f49f7 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -1538,6 +1538,7 @@ static void ufshcd_ungate_work(struct work_struct *work)
 int ufshcd_hold(struct ufs_hba *hba, bool async)
 {
 	int rc = 0;
+	bool flush_result;
 	unsigned long flags;
 
 	if (!ufshcd_is_clkgating_allowed(hba))
@@ -1569,7 +1570,9 @@ int ufshcd_hold(struct ufs_hba *hba, bool async)
 				break;
 			}
 			spin_unlock_irqrestore(hba->host->host_lock, flags);
-			flush_work(&hba->clk_gating.ungate_work);
+			flush_result = flush_work(&hba->clk_gating.ungate_work);
+			if (hba->clk_gating.is_suspended && !flush_result)
+				goto out;
 			spin_lock_irqsave(hba->host->host_lock, flags);
 			goto start;
 		}
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 4.19 15/21] scsi: ufs: Clean up completed request without interrupt notification

[Sasha Levin]

From: Stanley Chu <stanley.chu@mediatek.com>

[ Upstream commit b10178ee7fa88b68a9e8adc06534d2605cb0ec23 ]

If somehow no interrupt notification is raised for a completed request and
its doorbell bit is cleared by host, UFS driver needs to cleanup its
outstanding bit in ufshcd_abort(). Otherwise, system may behave abnormally
in the following scenario:

After ufshcd_abort() returns, this request will be requeued by SCSI layer
with its outstanding bit set. Any future completed request will trigger
ufshcd_transfer_req_compl() to handle all "completed outstanding bits". At
this time the "abnormal outstanding bit" will be detected and the "requeued
request" will be chosen to execute request post-processing flow. This is
wrong because this request is still "alive".

Link: https://lore.kernel.org/r/20200811141859.27399-2-huobean@gmail.com
Reviewed-by: Can Guo <cang@codeaurora.org>
Acked-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ufs/ufshcd.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 72879280df776..546bf4f960f91 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -5928,7 +5928,7 @@ static int ufshcd_abort(struct scsi_cmnd *cmd)
 			/* command completed already */
 			dev_err(hba->dev, "%s: cmd at tag %d successfully cleared from DB.\n",
 				__func__, tag);
-			goto out;
+			goto cleanup;
 		} else {
 			dev_err(hba->dev,
 				"%s: no response from device. tag = %d, err %d\n",
@@ -5962,6 +5962,7 @@ static int ufshcd_abort(struct scsi_cmnd *cmd)
 		goto out;
 	}
 
+cleanup:
 	scsi_dma_unmap(cmd);
 
 	spin_lock_irqsave(host->host_lock, flags);
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel