[PATCH v5 09/16] thermal: sun8i: Add A100's THS controller support

Frank Lee
2020-07-24T07:13:55Z

From: Yangtao Li <frank@allwinnertech.com>

This patch add thermal sensor controller support for A100,
which is similar to the previous ones.

Signed-off-by: Yangtao Li <frank@allwinnertech.com>
---
drivers/thermal/sun8i_thermal.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)

diff --git a/drivers/thermal/sun8i_thermal.c b/drivers/thermal/sun8i_thermal.c
index f423d44b9290..f8b13071a6f4 100644
--- a/drivers/thermal/sun8i_thermal.c
+++ b/drivers/thermal/sun8i_thermal.c
@@ -590,6 +590,19 @@ static const struct ths_thermal_chip sun50i_a64_ths = {
.calc_temp = sun8i_ths_calc_temp,
};

+static const struct ths_thermal_chip sun50i_a100_ths = {
+ .sensor_num = 3,
+ .has_bus_clk_reset = true,
+ .ft_deviation = 8000,
+ .offset = 187744,
+ .scale = 672,
+ .temp_data_base = SUN50I_H6_THS_TEMP_DATA,
+ .calibrate = sun50i_h6_ths_calibrate,
+ .init = sun50i_h6_thermal_init,
+ .irq_ack = sun50i_h6_irq_ack,
+ .calc_temp = sun8i_ths_calc_temp,
+};
+
static const struct ths_thermal_chip sun50i_h5_ths = {
.sensor_num = 2,
.has_mod_clk = true,
@@ -619,6 +632,7 @@ static const struct of_device_id of_ths_match[] = {
{ .compatible = "allwinner,sun8i-h3-ths", .data = &sun8i_h3_ths },
{ .compatible = "allwinner,sun8i-r40-ths", .data = &sun8i_r40_ths },
{ .compatible = "allwinner,sun50i-a64-ths", .data = &sun50i_a64_ths },
+ { .compatible = "allwinner,sun50i-a100-ths", .data = &sun50i_a100_ths },
{ .compatible = "allwinner,sun50i-h5-ths", .data = &sun50i_h5_ths },
{ .compatible = "allwinner,sun50i-h6-ths", .data = &sun50i_h6_ths },
{ /* sentinel */ },
--
2.24.0