[PATCH net v2] net: dsa: mt7530: fix advertising unsupported 1000baseT_Half

[PATCH net v2] net: dsa: mt7530: fix advertising unsupported 1000baseT_Half

[Landen Chao]

Remove 1000baseT_Half to advertise correct hardware capability in
phylink_validate() callback function.

Fixes: 38f790a80560 ("net: dsa: mt7530: Add support for port 5")
Signed-off-by: Landen Chao <landen.chao@mediatek.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
---
v1->v2
  - fix the commit subject spilled into the commit message
---
 drivers/net/dsa/mt7530.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 8dcb8a49ab67..238417db26f9 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -1501,7 +1501,7 @@ static void mt7530_phylink_validate(struct dsa_switch *ds, int port,
 		phylink_set(mask, 100baseT_Full);
 
 		if (state->interface != PHY_INTERFACE_MODE_MII) {
-			phylink_set(mask, 1000baseT_Half);
+			/* This switch only supports 1G full-duplex. */
 			phylink_set(mask, 1000baseT_Full);
 			if (port == 5)
 				phylink_set(mask, 1000baseX_Full);
-- 
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH net v2] net: dsa: mt7530: fix advertising unsupported 1000baseT_Half

[Russell King - ARM Linux admin]

On Fri, Aug 28, 2020 at 06:52:44PM +0800, Landen Chao wrote:
> Remove 1000baseT_Half to advertise correct hardware capability in
> phylink_validate() callback function.
> 
> Fixes: 38f790a80560 ("net: dsa: mt7530: Add support for port 5")
> Signed-off-by: Landen Chao <landen.chao@mediatek.com>
> Reviewed-by: Andrew Lunn <andrew@lunn.ch>
> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>

Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk>

Thanks.

> ---
> v1->v2
>   - fix the commit subject spilled into the commit message
> ---
>  drivers/net/dsa/mt7530.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
> index 8dcb8a49ab67..238417db26f9 100644
> --- a/drivers/net/dsa/mt7530.c
> +++ b/drivers/net/dsa/mt7530.c
> @@ -1501,7 +1501,7 @@ static void mt7530_phylink_validate(struct dsa_switch *ds, int port,
>  		phylink_set(mask, 100baseT_Full);
>  
>  		if (state->interface != PHY_INTERFACE_MODE_MII) {
> -			phylink_set(mask, 1000baseT_Half);
> +			/* This switch only supports 1G full-duplex. */
>  			phylink_set(mask, 1000baseT_Full);
>  			if (port == 5)
>  				phylink_set(mask, 1000baseX_Full);
> -- 
> 2.17.1
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> 

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel