[PATCH V2 6/8] arm64: dts: ti: k3-am65-base-board Use generic camera for node name instead of ov5640

Nishanth Menon
2020-09-03T13:02:13Z

Use camera@ naming for nodes following standard conventions of device
tree (section 2.2.2 Generic Names recommendation in [1]).

[1] https://github.com/devicetree-org/devicetree-specification/tree/v0.3

Suggested-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Acked-by: Suman Anna <s-anna@ti.com>
---
Changes:
v2: None (picked acks/reviews)
v1: https://lore.kernel.org/linux-arm-kernel/20200901223059.14801-5-nm@ti.com/

arch/arm64/boot/dts/ti/k3-am654-base-board.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index b8a8a0fcb8af..86c9074cb070 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -257,7 +257,7 @@
pinctrl-0 = <&main_i2c1_pins_default>;
clock-frequency = <400000>;

- ov5640@3c {
+ ov5640: camera@3c {
compatible = "ovti,ov5640";
reg = <0x3c>;

--
2.17.1