From: Krzysztof Kozlowski <krzk@kernel.org>
To: Olof Johansson <olof@lixom.net>, Arnd Bergmann <arnd@arndb.de>,
arm@kernel.org, soc@kernel.org
Cc: linux-samsung-soc@vger.kernel.org, Kukjin Kim <kgene@kernel.org>,
linux-arm-kernel@lists.infradead.org,
Krzysztof Kozlowski <krzk@kernel.org>,
linux-kernel@vger.kernel.org
Subject: [GIT PULL 1/2] ARM: dts: samsung: Changes for v5.10
Date: Mon, 7 Sep 2020 17:04:24 +0200 [thread overview]
Message-ID: <20200907150425.11077-1-krzk@kernel.org> (raw)
Hi,
Big set of changes but these are mostly cleanups. I will definitely have more
pull requests later (for mach/soc, defconfig, drivers).
Best regards,
Krzysztof
The following changes since commit 9123e3a74ec7b934a4a099e98af6a61c2f80bbf5:
Linux 5.9-rc1 (2020-08-16 13:04:57 -0700)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux.git tags/samsung-dt-5.10
for you to fetch changes up to d3604c91566a8b06683482e0c7e2fa9473aa8b9a:
ARM: dts: exynos: Silence SATA PHY warning in Exynos5250 (2020-09-06 18:56:39 +0200)
----------------------------------------------------------------
Samsung DTS ARM changes for v5.10
1. Add sound support to Galaxy S3/Midas family (Exynos4412).
2. Add sound support to Galaxy S/Aries family (S5Pv210).
3. Configure L2C-310 cache controller via DTS on Exynos4.
4. Big cleanup of Exynos DTS to fix as many dtschema warnings as
possible. This includes adding missing properties (thus e.g.
enabling S3C RTC clock), correcting existing nodes, renaming of
nodes and using non-deprecated properties or compatibles. Except
mentioned bring up of S3C RTC, this should not have visible
effect.
----------------------------------------------------------------
Guillaume Tucker (1):
ARM: dts: exynos: add prefetch properties for L2C-310 cache
Jonathan Bakker (1):
ARM: dts: s5pv210: Enable audio on Aries boards
Krzysztof Kozlowski (45):
dt-bindings: arm: samsung: Do not require clkout on Exynos5260 and Exynos7
ARM: dts: exynos: Move fixed clocks under root node in Exynos3250
ARM: dts: exynos: Remove snps, dwc2 compatible in Exynos3250
ARM: dts: exynos: Silence i2c-gpio dtschema warning in Galaxy I9100
ARM: dts: exynos: Correct GPU regulator properties in Galaxy I9100
ARM: dts: exynos: Correct S3C RTC bindings and enable it in Galaxy I9100
ARM: dts: exynos: Correct S3C RTC bindings and enable it in Origen
ARM: dts: exynos: Correct S3C RTC bindings and enable it in Trats
ARM: dts: exynos: Correct S3C RTC bindings and enable it in Universal C210
ARM: dts: exynos: Correct S3C RTC bindings in SMDKv310
ARM: dts: exynos: Add and enable 32 kHz modem clock in Galaxy I9100
ARM: dts: exynos: Add and enable 32 kHz modem clock in Trats
ARM: dts: exynos: Align SPI GPIO node name with dtschema in Universal C210
ARM: dts: exynos: Replace deprecated GPIO spi-gpio properties in Universal C210
ARM: dts: exynos: Align SPI GPIO node name with dtschema in Galaxy I9100
ARM: dts: exynos: Override thermal by label in Exynos4210
ARM: dts: exynos: Override thermal by label in Galaxy I9000
ARM: dts: exynos: Override thermal by label in Trats
ARM: dts: exynos: Add CPU cooling in Exynos4210 Origen
ARM: dts: exynos: Add CPU cooling in SMDKv310
ARM: dts: exynos: Add CPU cooling in Universal C210
ARM: dts: exynos: Align MHL GPIO pin configuration with dtschema on Galaxy I9100
ARM: dts: exynos: Correct compatible of fixed clocks in Midas boards
ARM: dts: exynos: Add S5M8767 clocks for RTC in Exynos4412 Origen
ARM: dts: exynos: Override thermal by label in Midas
ARM: dts: exynos: Override thermal by label in Exynos4412 Odroids
ARM: dts: exynos: Add CPU cooling in Exynos4412 Origen
ARM: dts: exynos: Add CPU cooling in SMDK4412
ARM: dts: exynos: Add CPU cooling in Tiny4412
ARM: dts: exynos: Correct S3C RTC bindings in SMDK4412
ARM: dts: exynos: Correct S3C RTC bindings in Tiny4412
ARM: dts: exynos: Correct whitespace and indentation issues
ARM: dts: exynos: Correct compatible for Exynos5 GIC
ARM: dts: exynos: Correct compatible for Exynos5260 GIC
ARM: dts: exynos: Remove unneeded address/size cells in Exynos5260 GIC
ARM: dts: exynos: Correct S3C RTC bindings in SMDK5410
ARM: dts: exynos: Silence i2c-gpio dtschema warning in Exynos5250 Arndale
ARM: dts: exynos: Correct whitespace and indentation issues in Exynos5
ARM: dts: exynos: Override thermal by label in Exynos5250
ARM: dts: exynos: Add max77686 clocks for S3C RTC in SMDK5250
ARM: dts: exynos: Use S5M8767 clock in S3C RTC in Exynos5250 Spring
ARM: dts: exynos: Silence DP HPD pinctrl dtschema warning in Exynos5250 Spring
ARM: dts: exynos: Use S2MPS11 clock in S3C RTC in SMDK5420
ARM: dts: exynos: Remove I2C9 samsung, i2c-slave-addr from Exynos5250 boards
ARM: dts: exynos: Silence SATA PHY warning in Exynos5250
Simon Shields (1):
ARM: dts: exynos: Add sound support to Midas
Sylwester Nawrocki (1):
ARM: dts: samsung: odroid-xu3: Move assigned-clock* properties to i2s0 node
.../devicetree/bindings/arm/samsung/pmu.yaml | 22 ++-
arch/arm/boot/dts/exynos3250-monk.dts | 2 +-
arch/arm/boot/dts/exynos3250-rinato.dts | 2 +-
arch/arm/boot/dts/exynos3250.dtsi | 44 ++---
arch/arm/boot/dts/exynos4210-i9100.dts | 56 +++++--
arch/arm/boot/dts/exynos4210-origen.dts | 27 +++
arch/arm/boot/dts/exynos4210-smdkv310.dts | 25 +++
arch/arm/boot/dts/exynos4210-trats.dts | 186 ++++++++++++---------
arch/arm/boot/dts/exynos4210-universal_c210.dts | 36 +++-
arch/arm/boot/dts/exynos4210.dtsi | 38 ++---
arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi | 42 ++++-
arch/arm/boot/dts/exynos4412-i9300.dts | 6 +-
arch/arm/boot/dts/exynos4412-i9305.dts | 2 +-
arch/arm/boot/dts/exynos4412-midas.dtsi | 116 +++++++++----
arch/arm/boot/dts/exynos4412-n710x.dts | 39 ++++-
arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 34 ++--
arch/arm/boot/dts/exynos4412-odroidu3.dts | 46 +++--
arch/arm/boot/dts/exynos4412-origen.dts | 25 +++
arch/arm/boot/dts/exynos4412-smdk4412.dts | 27 +++
arch/arm/boot/dts/exynos4412-tiny4412.dts | 24 +++
arch/arm/boot/dts/exynos4412-trats2.dts | 2 +-
arch/arm/boot/dts/exynos4412.dtsi | 2 +
arch/arm/boot/dts/exynos5.dtsi | 10 +-
arch/arm/boot/dts/exynos5250-arndale.dts | 20 +--
arch/arm/boot/dts/exynos5250-smdk5250.dts | 16 +-
arch/arm/boot/dts/exynos5250-spring.dts | 41 +++--
arch/arm/boot/dts/exynos5250.dtsi | 52 +++---
arch/arm/boot/dts/exynos5260.dtsi | 4 +-
arch/arm/boot/dts/exynos5410-odroidxu.dts | 8 +-
arch/arm/boot/dts/exynos5410-smdk5410.dts | 12 ++
arch/arm/boot/dts/exynos5410.dtsi | 12 +-
arch/arm/boot/dts/exynos5420-smdk5420.dts | 3 +
arch/arm/boot/dts/exynos5420.dtsi | 16 +-
arch/arm/boot/dts/exynos5422-odroid-core.dtsi | 4 +-
arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi | 60 +++----
arch/arm/boot/dts/s5pv210-aries.dtsi | 10 ++
arch/arm/boot/dts/s5pv210-fascinate4g.dts | 98 +++++++++++
arch/arm/boot/dts/s5pv210-galaxys.dts | 85 ++++++++++
38 files changed, 893 insertions(+), 361 deletions(-)
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2020-09-07 15:06 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-07 15:04 Krzysztof Kozlowski [this message]
2020-09-07 15:04 ` [GIT PULL 2/2] arm64: dts: samsung: Changes for v5.10 Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200907150425.11077-1-krzk@kernel.org \
--to=krzk@kernel.org \
--cc=arm@kernel.org \
--cc=arnd@arndb.de \
--cc=kgene@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=olof@lixom.net \
--cc=soc@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).