From: Lokesh Vutla <lokeshvutla@ti.com>
To: Nishanth Menon <nm@ti.com>, Tero Kristo <t-kristo@ti.com>,
Rob Herring <robh+dt@kernel.org>
Cc: Device Tree Mailing List <devicetree@vger.kernel.org>,
Grygorii Strashko <grygorii.strashko@ti.com>,
Lokesh Vutla <lokeshvutla@ti.com>, Sekhar Nori <nsekhar@ti.com>,
Kishon Vijay Abraham I <kishon@ti.com>,
Linux ARM Mailing List <linux-arm-kernel@lists.infradead.org>
Subject: [PATCH v3 0/5] arm64: Initial support for Texas Instrument's J7200 Platform
Date: Tue, 8 Sep 2020 21:52:47 +0530 [thread overview]
Message-ID: <20200908162252.17672-1-lokeshvutla@ti.com> (raw)
This series adds initial support for latest new SoC, J7200, from Texas Instruments.
The J7200 SoC is a part of the K3 Multicore SoC architecture platform.
It is targeted for for automotive gateway, vehicle compute systems,
Vehicle-to-Vehicle (V2V) and Vehicle-to-Everything (V2X) applications.
The SoC aims to meet the complex processing needs of modern embedded products.
See J7200 Technical Reference Manual (SPRUIU1, June 2020)
for further details: https://www.ti.com/lit/pdf/spruiu1
This series is based on the ti-k3-dts-next from Nishanth's tree[0].
Boot log: https://pastebin.ubuntu.com/p/Ppng92TR9z/
Changes since v2:
- Update Makefile to build dtbs using CONFIG_ARCH_K3
- use 0x00 in all places just to be consistent for all K3 devices
- Fixed upper case to lower case in reg property.
[0] git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux.git
Lokesh Vutla (5):
arm64: dts: ti: Makefile: Use ARCH_K3 for building dtbs
dt-bindings: arm: ti: Convert K3 board/soc bindings to DT schema
dt-bindings: arm: ti: Add bindings for J7200 SoC
arm64: dts: ti: Add support for J7200 SoC
arm64: dts: ti: Add support for J7200 Common Processor Board
.../devicetree/bindings/arm/ti/k3.txt | 26 ---
.../devicetree/bindings/arm/ti/k3.yaml | 35 +++
MAINTAINERS | 2 +-
arch/arm64/boot/dts/ti/Makefile | 6 +-
.../dts/ti/k3-j7200-common-proc-board.dts | 64 ++++++
arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 199 ++++++++++++++++++
.../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 84 ++++++++
arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi | 29 +++
arch/arm64/boot/dts/ti/k3-j7200.dtsi | 165 +++++++++++++++
9 files changed, 581 insertions(+), 29 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/arm/ti/k3.txt
create mode 100644 Documentation/devicetree/bindings/arm/ti/k3.yaml
create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
create mode 100644 arch/arm64/boot/dts/ti/k3-j7200.dtsi
--
2.28.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2020-09-08 16:24 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-08 16:22 Lokesh Vutla [this message]
2020-09-08 16:22 ` [PATCH v3 1/5] arm64: dts: ti: Makefile: Use ARCH_K3 for building dtbs Lokesh Vutla
2020-09-08 16:48 ` Suman Anna
2020-09-10 12:51 ` Nishanth Menon
2020-09-08 16:22 ` [PATCH v3 2/5] dt-bindings: arm: ti: Convert K3 board/soc bindings to DT schema Lokesh Vutla
2020-09-08 16:22 ` [PATCH v3 3/5] dt-bindings: arm: ti: Add bindings for J7200 SoC Lokesh Vutla
2020-09-08 16:22 ` [PATCH v3 4/5] arm64: dts: ti: Add support " Lokesh Vutla
2020-09-10 13:05 ` Vignesh Raghavendra
2020-09-10 16:54 ` Nishanth Menon
2020-09-10 17:19 ` Nishanth Menon
2020-09-10 17:54 ` Suman Anna
2020-09-10 18:20 ` Nishanth Menon
2020-09-11 2:47 ` Suman Anna
2020-09-11 13:34 ` Nishanth Menon
2020-09-08 16:22 ` [PATCH v3 5/5] arm64: dts: ti: Add support for J7200 Common Processor Board Lokesh Vutla
2020-09-10 17:23 ` Nishanth Menon
2020-09-10 17:28 ` [PATCH v3 0/5] arm64: Initial support for Texas Instrument's J7200 Platform Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200908162252.17672-1-lokeshvutla@ti.com \
--to=lokeshvutla@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=grygorii.strashko@ti.com \
--cc=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=nm@ti.com \
--cc=nsekhar@ti.com \
--cc=robh+dt@kernel.org \
--cc=t-kristo@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox