Re: [PATCH] drm/xlnx: Use devm_drm_dev_alloc

[Daniel Vetter <daniel@ffwll.ch>]

On Tue, Sep 08, 2020 at 12:16:00PM -0700, Hyun Kwon wrote:
> Hi Daniel,
> 
> On Mon, Sep 07, 2020 at 01:22:25AM -0700, Daniel Vetter wrote:
> > Gets rid of drmm_add_final_kfree, which I want to unexport so that it
> > stops confusion people about this transitional state of rolling drm
> > managed memory out.
> > 
> > This also fixes the missing drm_dev_put in the error path of the probe
> > code.
> > 
> > v2: Drop the misplaced drm_dev_put from zynqmp_dpsub_drm_init (all
> > other paths leaked on error, this should have been in
> > zynqmp_dpsub_probe), now that subsumed by the auto-cleanup of
> > devm_drm_dev_alloc.
> > 
> > Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
> > Cc: Hyun Kwon <hyun.kwon@xilinx.com>
> > Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > Cc: Michal Simek <michal.simek@xilinx.com>
> > Cc: linux-arm-kernel@lists.infradead.org
> 
> Looks correct to me.
> 
> Reviewed-by: Hyun Kwon <hyun.kwon@xilinx.com>

Merged all patches up to this one here to drm-misc-next.
-Daniel

> 
> Thanks!
> 
> -hyun
> 
> > ---
> >  drivers/gpu/drm/xlnx/zynqmp_dpsub.c | 27 ++++++---------------------
> >  1 file changed, 6 insertions(+), 21 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/xlnx/zynqmp_dpsub.c b/drivers/gpu/drm/xlnx/zynqmp_dpsub.c
> > index 26328c76305b..8e69303aad3f 100644
> > --- a/drivers/gpu/drm/xlnx/zynqmp_dpsub.c
> > +++ b/drivers/gpu/drm/xlnx/zynqmp_dpsub.c
> > @@ -111,7 +111,7 @@ static int zynqmp_dpsub_drm_init(struct zynqmp_dpsub *dpsub)
> >  	/* Initialize mode config, vblank and the KMS poll helper. */
> >  	ret = drmm_mode_config_init(drm);
> >  	if (ret < 0)
> > -		goto err_dev_put;
> > +		return ret;
> >  
> >  	drm->mode_config.funcs = &zynqmp_dpsub_mode_config_funcs;
> >  	drm->mode_config.min_width = 0;
> > @@ -121,7 +121,7 @@ static int zynqmp_dpsub_drm_init(struct zynqmp_dpsub *dpsub)
> >  
> >  	ret = drm_vblank_init(drm, 1);
> >  	if (ret)
> > -		goto err_dev_put;
> > +		return ret;
> >  
> >  	drm->irq_enabled = 1;
> >  
> > @@ -154,8 +154,6 @@ static int zynqmp_dpsub_drm_init(struct zynqmp_dpsub *dpsub)
> >  
> >  err_poll_fini:
> >  	drm_kms_helper_poll_fini(drm);
> > -err_dev_put:
> > -	drm_dev_put(drm);
> >  	return ret;
> >  }
> >  
> > @@ -208,27 +206,16 @@ static int zynqmp_dpsub_probe(struct platform_device *pdev)
> >  	int ret;
> >  
> >  	/* Allocate private data. */
> > -	dpsub = kzalloc(sizeof(*dpsub), GFP_KERNEL);
> > -	if (!dpsub)
> > -		return -ENOMEM;
> > +	dpsub = devm_drm_dev_alloc(&pdev->dev, &zynqmp_dpsub_drm_driver,
> > +				   struct zynqmp_dpsub, drm);
> > +	if (IS_ERR(dpsub))
> > +		return PTR_ERR(dpsub);
> >  
> >  	dpsub->dev = &pdev->dev;
> >  	platform_set_drvdata(pdev, dpsub);
> >  
> >  	dma_set_mask(dpsub->dev, DMA_BIT_MASK(ZYNQMP_DISP_MAX_DMA_BIT));
> >  
> > -	/*
> > -	 * Initialize the DRM device early, as the DRM core mandates usage of
> > -	 * the managed memory helpers tied to the DRM device.
> > -	 */
> > -	ret = drm_dev_init(&dpsub->drm, &zynqmp_dpsub_drm_driver, &pdev->dev);
> > -	if (ret < 0) {
> > -		kfree(dpsub);
> > -		return ret;
> > -	}
> > -
> > -	drmm_add_final_kfree(&dpsub->drm, dpsub);
> > -
> >  	/* Try the reserved memory. Proceed if there's none. */
> >  	of_reserved_mem_device_init(&pdev->dev);
> >  
> > @@ -286,8 +273,6 @@ static int zynqmp_dpsub_remove(struct platform_device *pdev)
> >  	clk_disable_unprepare(dpsub->apb_clk);
> >  	of_reserved_mem_device_release(&pdev->dev);
> >  
> > -	drm_dev_put(drm);
> > -
> >  	return 0;
> >  }
> >  
> > -- 
> > 2.28.0
> > 

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel