From: Jonathan Cameron <jic23@kernel.org>
To: Fabrice Gasnier <fabrice.gasnier@st.com>
Cc: olivier.moysan@st.com, alexandre.torgue@st.com,
linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
Sergiu Cuciurean <sergiu.cuciurean@analog.com>,
mcoquelin.stm32@gmail.com,
Alexandru Ardelean <alexandru.ardelean@analog.com>,
linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2] iio: stm32-dac: Replace indio_dev->mlock with own device lock
Date: Wed, 16 Sep 2020 18:52:30 +0100 [thread overview]
Message-ID: <20200916185230.45c0b7d4@archlinux> (raw)
In-Reply-To: <b8d5cbb5-f393-6a5f-19cd-afa983b9f10a@st.com>
On Wed, 16 Sep 2020 12:18:02 +0200
Fabrice Gasnier <fabrice.gasnier@st.com> wrote:
> On 9/16/20 11:23 AM, Alexandru Ardelean wrote:
> > From: Sergiu Cuciurean <sergiu.cuciurean@analog.com>
> >
> > As part of the general cleanup of indio_dev->mlock, this change replaces
> > it with a local lock. The lock protects against potential races when
> > reading the CR reg and then updating, so that the state of pm_runtime
> > is consistent between the two operations.
> >
> > This is part of a bigger cleanup.
> > Link: https://lore.kernel.org/linux-iio/CA+U=Dsoo6YABe5ODLp+eFNPGFDjk5ZeQEceGkqjxXcVEhLWubw@mail.gmail.com/
> >
> > Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com>
> > Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
> > ---
> > drivers/iio/dac/stm32-dac.c | 13 +++++++++----
> > 1 file changed, 9 insertions(+), 4 deletions(-)
>
> Hi Alexandru,
>
> Many thanks for this updated patch,
>
> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Applied to the togreg branch of iio.git and pushed out as testing for
the autobuilders to poke at it.
Thanks,
Jonathan
>
> Best regards,
> Fabrice
>
> >
> > diff --git a/drivers/iio/dac/stm32-dac.c b/drivers/iio/dac/stm32-dac.c
> > index 092c796fa3d9..12dec68c16f7 100644
> > --- a/drivers/iio/dac/stm32-dac.c
> > +++ b/drivers/iio/dac/stm32-dac.c
> > @@ -26,9 +26,12 @@
> > /**
> > * struct stm32_dac - private data of DAC driver
> > * @common: reference to DAC common data
> > + * @lock: lock to protect against potential races when reading
> > + * and update CR, to keep it in sync with pm_runtime
> > */
> > struct stm32_dac {
> > struct stm32_dac_common *common;
> > + struct mutex lock;
> > };
> >
> > static int stm32_dac_is_enabled(struct iio_dev *indio_dev, int channel)
> > @@ -58,10 +61,10 @@ static int stm32_dac_set_enable_state(struct iio_dev *indio_dev, int ch,
> > int ret;
> >
> > /* already enabled / disabled ? */
> > - mutex_lock(&indio_dev->mlock);
> > + mutex_lock(&dac->lock);
> > ret = stm32_dac_is_enabled(indio_dev, ch);
> > if (ret < 0 || enable == !!ret) {
> > - mutex_unlock(&indio_dev->mlock);
> > + mutex_unlock(&dac->lock);
> > return ret < 0 ? ret : 0;
> > }
> >
> > @@ -69,13 +72,13 @@ static int stm32_dac_set_enable_state(struct iio_dev *indio_dev, int ch,
> > ret = pm_runtime_get_sync(dev);
> > if (ret < 0) {
> > pm_runtime_put_noidle(dev);
> > - mutex_unlock(&indio_dev->mlock);
> > + mutex_unlock(&dac->lock);
> > return ret;
> > }
> > }
> >
> > ret = regmap_update_bits(dac->common->regmap, STM32_DAC_CR, msk, en);
> > - mutex_unlock(&indio_dev->mlock);
> > + mutex_unlock(&dac->lock);
> > if (ret < 0) {
> > dev_err(&indio_dev->dev, "%s failed\n", en ?
> > "Enable" : "Disable");
> > @@ -327,6 +330,8 @@ static int stm32_dac_probe(struct platform_device *pdev)
> > indio_dev->info = &stm32_dac_iio_info;
> > indio_dev->modes = INDIO_DIRECT_MODE;
> >
> > + mutex_init(&dac->lock);
> > +
> > ret = stm32_dac_chan_of_init(indio_dev);
> > if (ret < 0)
> > return ret;
> >
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
prev parent reply other threads:[~2020-09-16 17:55 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-26 6:38 [PATCH] iio: stm32-dac: Replace indio_dev->mlock with own device lock Alexandru Ardelean
2020-08-26 8:57 ` Fabrice Gasnier
2020-08-26 10:01 ` Alexandru Ardelean
2020-08-26 12:00 ` [PATCH v2] " Alexandru Ardelean
2020-08-27 8:55 ` Alexandru Ardelean
2020-08-27 9:03 ` Fabrice Gasnier
2020-08-27 10:00 ` Alexandru Ardelean
2020-08-29 15:46 ` Jonathan Cameron
2020-09-02 6:12 ` Alexandru Ardelean
2020-09-16 9:23 ` Alexandru Ardelean
2020-09-16 10:18 ` Fabrice Gasnier
2020-09-16 17:52 ` Jonathan Cameron [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200916185230.45c0b7d4@archlinux \
--to=jic23@kernel.org \
--cc=alexandre.torgue@st.com \
--cc=alexandru.ardelean@analog.com \
--cc=fabrice.gasnier@st.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=olivier.moysan@st.com \
--cc=sergiu.cuciurean@analog.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).