From: Jonathan Cameron <jic23@kernel.org>
To: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: linux-iio@vger.kernel.org, festevam@gmail.com,
s.hauer@pengutronix.de, linux-kernel@vger.kernel.org,
Sergiu Cuciurean <sergiu.cuciurean@analog.com>,
linux-imx@nxp.com, kernel@pengutronix.de, shawnguo@kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2] iio: adc: fsl-imx25-gcq: Replace indio_dev->mlock with own device lock
Date: Thu, 17 Sep 2020 19:27:39 +0100 [thread overview]
Message-ID: <20200917192739.38a13ae0@archlinux> (raw)
In-Reply-To: <20200916092928.78026-1-alexandru.ardelean@analog.com>
On Wed, 16 Sep 2020 12:29:28 +0300
Alexandru Ardelean <alexandru.ardelean@analog.com> wrote:
> From: Sergiu Cuciurean <sergiu.cuciurean@analog.com>
>
> As part of the general cleanup of indio_dev->mlock, this change replaces
> it with a local lock, to protect against any other accesses during the
> reading of sample. Reading a sample requires multiple consecutive regmap
> operations and a completion callback, so this requires that no other
> read occurs until it completes.
>
> This is part of a bigger cleanup.
> Link: https://lore.kernel.org/linux-iio/CA+U=Dsoo6YABe5ODLp+eFNPGFDjk5ZeQEceGkqjxXcVEhLWubw@mail.gmail.com/
>
> Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com>
> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
This seems simple enough so I've applied it to the togreg branch of iio.git
Thanks,
Jonathan
> ---
> drivers/iio/adc/fsl-imx25-gcq.c | 15 +++++++++++++--
> 1 file changed, 13 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/iio/adc/fsl-imx25-gcq.c b/drivers/iio/adc/fsl-imx25-gcq.c
> index 8cb51cf7a816..ab5139e911c3 100644
> --- a/drivers/iio/adc/fsl-imx25-gcq.c
> +++ b/drivers/iio/adc/fsl-imx25-gcq.c
> @@ -40,6 +40,15 @@ struct mx25_gcq_priv {
> int irq;
> struct regulator *vref[4];
> u32 channel_vref_mv[MX25_NUM_CFGS];
> + /*
> + * Lock to protect the device state during a potential concurrent
> + * read access from userspace. Reading a raw value requires a sequence
> + * of register writes, then a wait for a completion callback,
> + * and finally a register read, during which userspace could issue
> + * another read request. This lock protects a read access from
> + * ocurring before another one has finished.
> + */
> + struct mutex lock;
> };
>
> #define MX25_CQG_CHAN(chan, id) {\
> @@ -137,9 +146,9 @@ static int mx25_gcq_read_raw(struct iio_dev *indio_dev,
>
> switch (mask) {
> case IIO_CHAN_INFO_RAW:
> - mutex_lock(&indio_dev->mlock);
> + mutex_lock(&priv->lock);
> ret = mx25_gcq_get_raw_value(&indio_dev->dev, chan, priv, val);
> - mutex_unlock(&indio_dev->mlock);
> + mutex_unlock(&priv->lock);
> return ret;
>
> case IIO_CHAN_INFO_SCALE:
> @@ -314,6 +323,8 @@ static int mx25_gcq_probe(struct platform_device *pdev)
> return PTR_ERR(priv->regs);
> }
>
> + mutex_init(&priv->lock);
> +
> init_completion(&priv->completed);
>
> ret = mx25_gcq_setup_cfgs(pdev, priv);
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
prev parent reply other threads:[~2020-09-17 18:29 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20200826120609.203724-1-alexandru.ardelean@analog.com>
2020-09-16 9:29 ` [PATCH v2] iio: adc: fsl-imx25-gcq: Replace indio_dev->mlock with own device lock Alexandru Ardelean
2020-09-17 18:27 ` Jonathan Cameron [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200917192739.38a13ae0@archlinux \
--to=jic23@kernel.org \
--cc=alexandru.ardelean@analog.com \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=sergiu.cuciurean@analog.com \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).