From: Will Deacon <will@kernel.org>
To: linux-arm-kernel@lists.infradead.org
Cc: Catalin Marinas <catalin.marinas@arm.com>,
David Brazdil <dbrazdil@google.com>,
Will Deacon <will@kernel.org>,
Suzuki K Poulose <suzuki.poulose@arm.com>
Subject: [PATCH 08/19] arm64: Introduce separate file for spectre mitigations and reporting
Date: Fri, 18 Sep 2020 17:47:18 +0100 [thread overview]
Message-ID: <20200918164729.31994-9-will@kernel.org> (raw)
In-Reply-To: <20200918164729.31994-1-will@kernel.org>
The spectre mitigation code is spread over a few different files, which
makes it both hard to follow, but also hard to remove it should we want
to do that in future.
Introduce a new file for housing the spectre mitigations, and populate
it with the spectre-v1 reporting code to start with.
Signed-off-by: Will Deacon <will@kernel.org>
---
arch/arm64/kernel/Makefile | 2 +-
arch/arm64/kernel/cpu_errata.c | 6 ------
arch/arm64/kernel/proton-pack.c | 32 ++++++++++++++++++++++++++++++++
3 files changed, 33 insertions(+), 7 deletions(-)
create mode 100644 arch/arm64/kernel/proton-pack.c
diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile
index ed8799bdd41f..15b0fcbb6883 100644
--- a/arch/arm64/kernel/Makefile
+++ b/arch/arm64/kernel/Makefile
@@ -19,7 +19,7 @@ obj-y := debug-monitors.o entry.o irq.o fpsimd.o \
return_address.o cpuinfo.o cpu_errata.o \
cpufeature.o alternative.o cacheinfo.o \
smp.o smp_spin_table.o topology.o smccc-call.o \
- ssbd.o syscall.o
+ ssbd.o syscall.o proton-pack.o
targets += efi-entry.o
diff --git a/arch/arm64/kernel/cpu_errata.c b/arch/arm64/kernel/cpu_errata.c
index b275f2d5e7a3..5eb9a9126dc4 100644
--- a/arch/arm64/kernel/cpu_errata.c
+++ b/arch/arm64/kernel/cpu_errata.c
@@ -949,12 +949,6 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
}
};
-ssize_t cpu_show_spectre_v1(struct device *dev, struct device_attribute *attr,
- char *buf)
-{
- return sprintf(buf, "Mitigation: __user pointer sanitization\n");
-}
-
ssize_t cpu_show_spectre_v2(struct device *dev, struct device_attribute *attr,
char *buf)
{
diff --git a/arch/arm64/kernel/proton-pack.c b/arch/arm64/kernel/proton-pack.c
new file mode 100644
index 000000000000..c37bf468e4a4
--- /dev/null
+++ b/arch/arm64/kernel/proton-pack.c
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Handle detection, reporting and mitigation of Spectre v1, v2 and v4, as
+ * detailed at:
+ *
+ * https://developer.arm.com/support/arm-security-updates/speculative-processor-vulnerability
+ *
+ * This code was originally written hastily under an awful lot of stress and so
+ * aspects of it are somewhat hacky. Unfortunately, changing anything in here
+ * instantly makes me feel ill. Thanks, Jann. Thann.
+ *
+ * Copyright (C) 2018 ARM Ltd, All Rights Reserved.
+ * Copyright (C) 2020 Google LLC
+ *
+ * "If there's something strange in your neighbourhood, who you gonna call?"
+ *
+ * Authors: Will Deacon <will@kernel.org> and Marc Zyngier <maz@kernel.org>
+ */
+
+#include <linux/device.h>
+
+/*
+ * Spectre v1.
+ *
+ * The kernel can't protect userspace for this one: it's each person for
+ * themselves. Advertise what we're doing and be done with it.
+ */
+ssize_t cpu_show_spectre_v1(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ return sprintf(buf, "Mitigation: __user pointer sanitization\n");
+}
--
2.28.0.681.g6f77f65b4e-goog
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-09-18 16:51 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-18 16:47 [PATCH 00/19] Fix and rewrite arm64 spectre mitigations Will Deacon
2020-09-18 16:47 ` [PATCH 01/19] arm64: Make use of ARCH_WORKAROUND_1 even when KVM is not enabled Will Deacon
2020-09-18 16:47 ` [PATCH 02/19] arm64: Run ARCH_WORKAROUND_1 enabling code on all CPUs Will Deacon
2020-09-21 12:54 ` Sasha Levin
2020-09-18 16:47 ` [PATCH 03/19] arm64: Run ARCH_WORKAROUND_2 " Will Deacon
2020-09-18 17:13 ` Suzuki K Poulose
2020-09-18 16:47 ` [PATCH 04/19] arm64: Remove Spectre-related CONFIG_* options Will Deacon
2020-09-18 16:47 ` [PATCH 05/19] KVM: arm64: Replace CONFIG_KVM_INDIRECT_VECTORS with CONFIG_RANDOMIZE_BASE Will Deacon
2020-09-18 16:47 ` [PATCH 06/19] KVM: arm64: Simplify install_bp_hardening_cb() Will Deacon
2020-09-18 16:47 ` [PATCH 07/19] arm64: Rename ARM64_HARDEN_BRANCH_PREDICTOR to ARM64_SPECTRE_V2 Will Deacon
2020-09-18 16:47 ` Will Deacon [this message]
2020-09-18 16:47 ` [PATCH 09/19] arm64: Rewrite Spectre-v2 mitigation code Will Deacon
2020-09-18 16:47 ` [PATCH 10/19] KVM: arm64: Set CSV2 for guests on hardware unaffected by Spectre-v2 Will Deacon
2020-09-18 16:47 ` [PATCH 11/19] arm64: Group start_thread() functions together Will Deacon
2020-09-18 16:47 ` [PATCH 12/19] arm64: Treat SSBS as a non-strict system feature Will Deacon
2020-09-18 16:47 ` [PATCH 13/19] arm64: Rename ARM64_SSBD to ARM64_SPECTRE_V4 Will Deacon
2020-09-18 16:47 ` [PATCH 14/19] arm64: Move SSBD prctl() handler alongside other spectre mitigation code Will Deacon
2020-09-18 16:47 ` [PATCH 15/19] arm64: Rewrite Spectre-v4 " Will Deacon
2020-09-18 16:47 ` [PATCH 16/19] KVM: arm64: Simplify handling of ARCH_WORKAROUND_2 Will Deacon
2020-09-18 16:47 ` [PATCH 17/19] KVM: arm64: Get rid of kvm_arm_have_ssbd() Will Deacon
2020-09-18 16:47 ` [PATCH 18/19] KVM: arm64: Convert ARCH_WORKAROUND_2 to arm64_get_spectre_v4_state() Will Deacon
2020-09-18 16:47 ` [PATCH 19/19] arm64: Get rid of arm64_ssbd_state Will Deacon
2020-09-18 16:59 ` [PATCH 00/19] Fix and rewrite arm64 spectre mitigations Will Deacon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200918164729.31994-9-will@kernel.org \
--to=will@kernel.org \
--cc=catalin.marinas@arm.com \
--cc=dbrazdil@google.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=suzuki.poulose@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).