* [PATCH AUTOSEL 5.8 03/29] mt76: mt7915: use ieee80211_free_txskb to free tx skbs
[not found] <20200929013027.2406344-1-sashal@kernel.org>
@ 2020-09-29 1:30 ` Sasha Levin
2020-09-29 1:30 ` [PATCH AUTOSEL 5.8 07/29] drm/sun4i: mixer: Extend regmap max_register Sasha Levin
` (2 subsequent siblings)
3 siblings, 0 replies; 6+ messages in thread
From: Sasha Levin @ 2020-09-29 1:30 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Sasha Levin, netdev, Toke Høiland-Jørgensen,
linux-wireless, linux-mediatek, linux-arm-kernel, Kalle Valo,
Felix Fietkau
From: Felix Fietkau <nbd@nbd.name>
[ Upstream commit b4be5a53ebf478ffcfb4c98c0ccc4a8d922b9a02 ]
Using dev_kfree_skb for tx skbs breaks AQL. This worked until now only
by accident, because a mac80211 issue breaks AQL on drivers with firmware
rate control that report the rate via ieee80211_tx_status_ext as struct
rate_info.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200812144943.91974-1-nbd@nbd.name
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt76/mt7915/init.c | 8 ++++++--
drivers/net/wireless/mediatek/mt76/mt7915/mac.c | 2 +-
2 files changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/init.c b/drivers/net/wireless/mediatek/mt76/mt7915/init.c
index aadf56e80bae8..d7a3b05ab50c3 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/init.c
@@ -691,8 +691,12 @@ void mt7915_unregister_device(struct mt7915_dev *dev)
spin_lock_bh(&dev->token_lock);
idr_for_each_entry(&dev->token, txwi, id) {
mt7915_txp_skb_unmap(&dev->mt76, txwi);
- if (txwi->skb)
- dev_kfree_skb_any(txwi->skb);
+ if (txwi->skb) {
+ struct ieee80211_hw *hw;
+
+ hw = mt76_tx_status_get_hw(&dev->mt76, txwi->skb);
+ ieee80211_free_txskb(hw, txwi->skb);
+ }
mt76_put_txwi(&dev->mt76, txwi);
}
spin_unlock_bh(&dev->token_lock);
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mac.c b/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
index a264e304a3dfb..5800b2d1fb233 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
@@ -844,7 +844,7 @@ mt7915_tx_complete_status(struct mt76_dev *mdev, struct sk_buff *skb,
if (sta || !(info->flags & IEEE80211_TX_CTL_NO_ACK))
mt7915_tx_status(sta, hw, info, NULL);
- dev_kfree_skb(skb);
+ ieee80211_free_txskb(hw, skb);
}
void mt7915_txp_skb_unmap(struct mt76_dev *dev,
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH AUTOSEL 5.8 08/29] net: dsa: microchip: look for phy-mode in port nodes
[not found] <20200929013027.2406344-1-sashal@kernel.org>
2020-09-29 1:30 ` [PATCH AUTOSEL 5.8 03/29] mt76: mt7915: use ieee80211_free_txskb to free tx skbs Sasha Levin
2020-09-29 1:30 ` [PATCH AUTOSEL 5.8 07/29] drm/sun4i: mixer: Extend regmap max_register Sasha Levin
@ 2020-09-29 1:30 ` Sasha Levin
2020-09-29 5:56 ` Helmut Grohne
2020-09-29 1:30 ` [PATCH AUTOSEL 5.8 23/29] cpuidle: psci: Fix suspicious RCU usage Sasha Levin
3 siblings, 1 reply; 6+ messages in thread
From: Sasha Levin @ 2020-09-29 1:30 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Sasha Levin, devicetree, Alexandre Belloni, Helmut Grohne, netdev,
David S . Miller, linux-arm-kernel
From: Helmut Grohne <helmut.grohne@intenta.de>
[ Upstream commit edecfa98f602a597666e3c5cab2677ada38d93c5 ]
Documentation/devicetree/bindings/net/dsa/dsa.txt says that the phy-mode
property should be specified on port nodes. However, the microchip
drivers read it from the switch node.
Let the driver use the per-port property and fall back to the old
location with a warning.
Fix in-tree users.
Signed-off-by: Helmut Grohne <helmut.grohne@intenta.de>
Link: https://lore.kernel.org/netdev/20200617082235.GA1523@laureti-dev/
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/at91-sama5d2_icp.dts | 2 +-
drivers/net/dsa/microchip/ksz8795.c | 18 +++++++++++-----
drivers/net/dsa/microchip/ksz9477.c | 29 +++++++++++++++++---------
drivers/net/dsa/microchip/ksz_common.c | 13 +++++++++++-
drivers/net/dsa/microchip/ksz_common.h | 3 ++-
5 files changed, 47 insertions(+), 18 deletions(-)
diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/at91-sama5d2_icp.dts
index 8d19925fc09e4..6783cf16ff818 100644
--- a/arch/arm/boot/dts/at91-sama5d2_icp.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_icp.dts
@@ -116,7 +116,6 @@ spi2: spi@400 {
switch0: ksz8563@0 {
compatible = "microchip,ksz8563";
reg = <0>;
- phy-mode = "mii";
reset-gpios = <&pioA PIN_PD4 GPIO_ACTIVE_LOW>;
spi-max-frequency = <500000>;
@@ -140,6 +139,7 @@ port@2 {
reg = <2>;
label = "cpu";
ethernet = <&macb0>;
+ phy-mode = "mii";
fixed-link {
speed = <100>;
full-duplex;
diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index 87db588bcdd6b..44a4b73806382 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -941,11 +941,19 @@ static void ksz8795_port_setup(struct ksz_device *dev, int port, bool cpu_port)
ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_ENABLE, true);
if (cpu_port) {
+ if (!p->interface && dev->compat_interface) {
+ dev_warn(dev->dev,
+ "Using legacy switch \"phy-mode\" property, because it is missing on port %d node. "
+ "Please update your device tree.\n",
+ port);
+ p->interface = dev->compat_interface;
+ }
+
/* Configure MII interface for proper network communication. */
ksz_read8(dev, REG_PORT_5_CTRL_6, &data8);
data8 &= ~PORT_INTERFACE_TYPE;
data8 &= ~PORT_GMII_1GPS_MODE;
- switch (dev->interface) {
+ switch (p->interface) {
case PHY_INTERFACE_MODE_MII:
p->phydev.speed = SPEED_100;
break;
@@ -961,11 +969,11 @@ static void ksz8795_port_setup(struct ksz_device *dev, int port, bool cpu_port)
default:
data8 &= ~PORT_RGMII_ID_IN_ENABLE;
data8 &= ~PORT_RGMII_ID_OUT_ENABLE;
- if (dev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
- dev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
+ if (p->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+ p->interface == PHY_INTERFACE_MODE_RGMII_RXID)
data8 |= PORT_RGMII_ID_IN_ENABLE;
- if (dev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
- dev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
+ if (p->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+ p->interface == PHY_INTERFACE_MODE_RGMII_TXID)
data8 |= PORT_RGMII_ID_OUT_ENABLE;
data8 |= PORT_GMII_1GPS_MODE;
data8 |= PORT_INTERFACE_RGMII;
diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
index 4a9239b2c2e4a..a5402f4dd5278 100644
--- a/drivers/net/dsa/microchip/ksz9477.c
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -1217,7 +1217,7 @@ static void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port)
/* configure MAC to 1G & RGMII mode */
ksz_pread8(dev, port, REG_PORT_XMII_CTRL_1, &data8);
- switch (dev->interface) {
+ switch (p->interface) {
case PHY_INTERFACE_MODE_MII:
ksz9477_set_xmii(dev, 0, &data8);
ksz9477_set_gbit(dev, false, &data8);
@@ -1238,11 +1238,11 @@ static void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port)
ksz9477_set_gbit(dev, true, &data8);
data8 &= ~PORT_RGMII_ID_IG_ENABLE;
data8 &= ~PORT_RGMII_ID_EG_ENABLE;
- if (dev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
- dev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
+ if (p->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+ p->interface == PHY_INTERFACE_MODE_RGMII_RXID)
data8 |= PORT_RGMII_ID_IG_ENABLE;
- if (dev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
- dev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
+ if (p->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+ p->interface == PHY_INTERFACE_MODE_RGMII_TXID)
data8 |= PORT_RGMII_ID_EG_ENABLE;
p->phydev.speed = SPEED_1000;
break;
@@ -1286,23 +1286,32 @@ static void ksz9477_config_cpu_port(struct dsa_switch *ds)
dev->cpu_port = i;
dev->host_mask = (1 << dev->cpu_port);
dev->port_mask |= dev->host_mask;
+ p = &dev->ports[i];
/* Read from XMII register to determine host port
* interface. If set specifically in device tree
* note the difference to help debugging.
*/
interface = ksz9477_get_interface(dev, i);
- if (!dev->interface)
- dev->interface = interface;
- if (interface && interface != dev->interface)
+ if (!p->interface) {
+ if (dev->compat_interface) {
+ dev_warn(dev->dev,
+ "Using legacy switch \"phy-mode\" property, because it is missing on port %d node. "
+ "Please update your device tree.\n",
+ i);
+ p->interface = dev->compat_interface;
+ } else {
+ p->interface = interface;
+ }
+ }
+ if (interface && interface != p->interface)
dev_info(dev->dev,
"use %s instead of %s\n",
- phy_modes(dev->interface),
+ phy_modes(p->interface),
phy_modes(interface));
/* enable cpu port */
ksz9477_port_setup(dev, i, true);
- p = &dev->ports[dev->cpu_port];
p->vid_member = dev->port_mask;
p->on = 1;
}
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index 7b6c0dce75360..3dcf42f78b51b 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -413,6 +413,8 @@ int ksz_switch_register(struct ksz_device *dev,
const struct ksz_dev_ops *ops)
{
phy_interface_t interface;
+ struct device_node *port;
+ unsigned int port_num;
int ret;
if (dev->pdata)
@@ -446,10 +448,19 @@ int ksz_switch_register(struct ksz_device *dev,
/* Host port interface will be self detected, or specifically set in
* device tree.
*/
+ for (port_num = 0; port_num < dev->port_cnt; ++port_num)
+ dev->ports[port_num].interface = PHY_INTERFACE_MODE_NA;
if (dev->dev->of_node) {
ret = of_get_phy_mode(dev->dev->of_node, &interface);
if (ret == 0)
- dev->interface = interface;
+ dev->compat_interface = interface;
+ for_each_available_child_of_node(dev->dev->of_node, port) {
+ if (of_property_read_u32(port, "reg", &port_num))
+ continue;
+ if (port_num >= dev->port_cnt)
+ return -EINVAL;
+ of_get_phy_mode(port, &dev->ports[port_num].interface);
+ }
dev->synclko_125 = of_property_read_bool(dev->dev->of_node,
"microchip,synclko-125");
}
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
index 7d11dd32ec0d1..7382b1d0c1d81 100644
--- a/drivers/net/dsa/microchip/ksz_common.h
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -39,6 +39,7 @@ struct ksz_port {
u32 freeze:1; /* MIB counter freeze is enabled */
struct ksz_port_mib mib;
+ phy_interface_t interface;
};
struct ksz_device {
@@ -72,7 +73,7 @@ struct ksz_device {
int mib_cnt;
int mib_port_cnt;
int last_port; /* ports after that not used */
- phy_interface_t interface;
+ phy_interface_t compat_interface;
u32 regs_size;
bool phy_errata_9477;
bool synclko_125;
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH AUTOSEL 5.8 23/29] cpuidle: psci: Fix suspicious RCU usage
[not found] <20200929013027.2406344-1-sashal@kernel.org>
` (2 preceding siblings ...)
2020-09-29 1:30 ` [PATCH AUTOSEL 5.8 08/29] net: dsa: microchip: look for phy-mode in port nodes Sasha Levin
@ 2020-09-29 1:30 ` Sasha Levin
3 siblings, 0 replies; 6+ messages in thread
From: Sasha Levin @ 2020-09-29 1:30 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Sasha Levin, Ulf Hansson, Paul E . McKenney, linux-pm,
Naresh Kamboju, Rafael J . Wysocki, linux-arm-kernel
From: Ulf Hansson <ulf.hansson@linaro.org>
[ Upstream commit 36050d8984ab743f9990a2eb97a0062fdc3d7bbd ]
The commit eb1f00237aca ("lockdep,trace: Expose tracepoints"), started to
expose us for tracepoints. This lead to the following RCU splat on an ARM64
Qcom board.
[ 5.529634] WARNING: suspicious RCU usage
[ 5.537307] sdhci-pltfm: SDHCI platform and OF driver helper
[ 5.541092] 5.9.0-rc3 #86 Not tainted
[ 5.541098] -----------------------------
[ 5.541105] ../include/trace/events/lock.h:37 suspicious rcu_dereference_check() usage!
[ 5.541110]
[ 5.541110] other info that might help us debug this:
[ 5.541110]
[ 5.541116]
[ 5.541116] rcu_scheduler_active = 2, debug_locks = 1
[ 5.541122] RCU used illegally from extended quiescent state!
[ 5.541129] no locks held by swapper/0/0.
[ 5.541134]
[ 5.541134] stack backtrace:
[ 5.541143] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.9.0-rc3 #86
[ 5.541149] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
[ 5.541157] Call trace:
[ 5.568185] sdhci_msm 7864900.sdhci: Got CD GPIO
[ 5.574186] dump_backtrace+0x0/0x1c8
[ 5.574206] show_stack+0x14/0x20
[ 5.574229] dump_stack+0xe8/0x154
[ 5.574250] lockdep_rcu_suspicious+0xd4/0xf8
[ 5.574269] lock_acquire+0x3f0/0x460
[ 5.574292] _raw_spin_lock_irqsave+0x80/0xb0
[ 5.574314] __pm_runtime_suspend+0x4c/0x188
[ 5.574341] psci_enter_domain_idle_state+0x40/0xa0
[ 5.574362] cpuidle_enter_state+0xc0/0x610
[ 5.646487] cpuidle_enter+0x38/0x50
[ 5.650651] call_cpuidle+0x18/0x40
[ 5.654467] do_idle+0x228/0x278
[ 5.657678] cpu_startup_entry+0x24/0x70
[ 5.661153] rest_init+0x1a4/0x278
[ 5.665061] arch_call_rest_init+0xc/0x14
[ 5.668272] start_kernel+0x508/0x540
Following the path in pm_runtime_put_sync_suspend() from
psci_enter_domain_idle_state(), it seems like we end up using the RCU.
Therefore, let's simply silence the splat by informing the RCU about it
with RCU_NONIDLE.
Note that, this is a temporary solution. Instead we should strive to avoid
using RCU_NONIDLE (and similar), but rather push rcu_idle_enter|exit()
further down, closer to the arch specific code. However, as the CPU PM
notifiers are also using the RCU, additional rework is needed.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/cpuidle/cpuidle-psci.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/cpuidle/cpuidle-psci.c b/drivers/cpuidle/cpuidle-psci.c
index 3806f911b61c0..915172e3ec906 100644
--- a/drivers/cpuidle/cpuidle-psci.c
+++ b/drivers/cpuidle/cpuidle-psci.c
@@ -64,7 +64,7 @@ static int psci_enter_domain_idle_state(struct cpuidle_device *dev,
return -1;
/* Do runtime PM to manage a hierarchical CPU toplogy. */
- pm_runtime_put_sync_suspend(pd_dev);
+ RCU_NONIDLE(pm_runtime_put_sync_suspend(pd_dev));
state = psci_get_domain_state();
if (!state)
@@ -72,7 +72,7 @@ static int psci_enter_domain_idle_state(struct cpuidle_device *dev,
ret = psci_cpu_suspend_enter(state) ? -1 : idx;
- pm_runtime_get_sync(pd_dev);
+ RCU_NONIDLE(pm_runtime_get_sync(pd_dev));
cpu_pm_exit();
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 6+ messages in thread