linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Miles Chen <miles.chen@mediatek.com>
To: Catalin Marinas <catalin.marinas@arm.com>,
	Russell King <linux@armlinux.org.uk>,
	Minchan Kim <minchan@kernel.org>
Cc: Steve Capper <steve.capper@linaro.org>,
	wsd_upstream@mediatek.com, Will Deacon <will.deacon@arm.com>,
	linux-kernel@vger.kernel.org,
	Miles Chen <miles.chen@mediatek.com>,
	Simon Horman <horms@verge.net.au>,
	linux-mediatek@lists.infradead.org,
	Suren Baghdasaryan <surenb@google.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/4] arm: mm: reordering memory type table
Date: Fri, 23 Oct 2020 17:14:35 +0800	[thread overview]
Message-ID: <20201023091437.8225-3-miles.chen@mediatek.com> (raw)
In-Reply-To: <20201023091437.8225-1-miles.chen@mediatek.com>

From: Minchan Kim <minchan@kernel.org>

To use bit 5 in page table as L_PTE_SPECIAL, we need a room for that.
It seems we don't need 4 bits for the memory type with ARMv6+.
If it's true, let's reorder bits to make bit 5 free.

We will use the bit for L_PTE_SPECIAL in next patch.

A note from Catalin in [1]:
"
> Anyway, on ARMv7 or ARMv6+LPAE, the non-shared device gets mapped to
> shared device in hardware. Looking through the arm32 code, it seems that
> MT_DEVICE_NONSHARED is used by arch/arm/mach-shmobile/setup-r8a7779.c
> and IIUC that's a v7 platform (R-Car H1, Cortex-A9). I think the above
> should be defined to L_PTE_MT_DEV_SHARED, unless I miss any place where
> DEV_NONSHARED is relevant on ARMv6 (adding Simon to confirm on shmbile).
"

[1] https://lore.kernel.org/patchwork/patch/986574/

Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Simon Horman <horms@verge.net.au>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
---
 arch/arm/include/asm/pgtable-2level.h | 21 +++++++++++++++++----
 arch/arm/mm/proc-macros.S             |  4 ++--
 2 files changed, 19 insertions(+), 6 deletions(-)

diff --git a/arch/arm/include/asm/pgtable-2level.h b/arch/arm/include/asm/pgtable-2level.h
index 27a8635abea0..cdcd55cca37d 100644
--- a/arch/arm/include/asm/pgtable-2level.h
+++ b/arch/arm/include/asm/pgtable-2level.h
@@ -161,14 +161,27 @@
 #define L_PTE_MT_BUFFERABLE	(_AT(pteval_t, 0x01) << 2)	/* 0001 */
 #define L_PTE_MT_WRITETHROUGH	(_AT(pteval_t, 0x02) << 2)	/* 0010 */
 #define L_PTE_MT_WRITEBACK	(_AT(pteval_t, 0x03) << 2)	/* 0011 */
+#define L_PTE_MT_DEV_SHARED	(_AT(pteval_t, 0x04) << 2)	/* 0100 */
+#define L_PTE_MT_VECTORS	(_AT(pteval_t, 0x05) << 2)	/* 0101 */
 #define L_PTE_MT_MINICACHE	(_AT(pteval_t, 0x06) << 2)	/* 0110 (sa1100, xscale) */
 #define L_PTE_MT_WRITEALLOC	(_AT(pteval_t, 0x07) << 2)	/* 0111 */
-#define L_PTE_MT_DEV_SHARED	(_AT(pteval_t, 0x04) << 2)	/* 0100 */
-#define L_PTE_MT_DEV_NONSHARED	(_AT(pteval_t, 0x0c) << 2)	/* 1100 */
+#if defined(CONFIG_CPU_V7) || defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
+/*
+ * On ARMv7 or ARMv7+LPAE, the non-shared and shared device types get
+ * mapped to the same TEX remapping index. On classic ARMv7, the
+ * shareability is controlled by the PRRR[17:16] field, indexed by
+ * L_PTE_SHARED. On ARMv7+LPAE the device mapping is always shareable.
+ */
+#define L_PTE_MT_DEV_NONSHARED	L_PTE_MT_DEV_SHARED
+#define L_PTE_MT_DEV_WC		L_PTE_MT_BUFFERABLE
+#define L_PTE_MT_DEV_CACHED	L_PTE_MT_WRITEBACK
+#define L_PTE_MT_MASK		(_AT(pteval_t, 0x07) << 2)
+#else
 #define L_PTE_MT_DEV_WC		(_AT(pteval_t, 0x09) << 2)	/* 1001 */
 #define L_PTE_MT_DEV_CACHED	(_AT(pteval_t, 0x0b) << 2)	/* 1011 */
-#define L_PTE_MT_VECTORS	(_AT(pteval_t, 0x0f) << 2)	/* 1111 */
-#define L_PTE_MT_MASK		(_AT(pteval_t, 0x0f) << 2)
+#define L_PTE_MT_DEV_NONSHARED	(_AT(pteval_t, 0x0c) << 2)	/* 1100 */
+#define L_PTE_MT_MASK           (_AT(pteval_t, 0x0f) << 2)
+#endif
 
 #ifndef __ASSEMBLY__
 
diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S
index e2c743aa2eb2..dde1d6374250 100644
--- a/arch/arm/mm/proc-macros.S
+++ b/arch/arm/mm/proc-macros.S
@@ -137,7 +137,7 @@
 	.long	PTE_CACHEABLE					@ L_PTE_MT_WRITETHROUGH
 	.long	PTE_CACHEABLE | PTE_BUFFERABLE			@ L_PTE_MT_WRITEBACK
 	.long	PTE_BUFFERABLE					@ L_PTE_MT_DEV_SHARED
-	.long	0x00						@ unused
+	.long	PTE_CACHEABLE | PTE_BUFFERABLE | PTE_EXT_APX	@ L_PTE_MT_VECTORS
 	.long	0x00						@ L_PTE_MT_MINICACHE (not present)
 	.long	PTE_EXT_TEX(1) | PTE_CACHEABLE | PTE_BUFFERABLE	@ L_PTE_MT_WRITEALLOC
 	.long	0x00						@ unused
@@ -147,7 +147,7 @@
 	.long	PTE_EXT_TEX(2)					@ L_PTE_MT_DEV_NONSHARED
 	.long	0x00						@ unused
 	.long	0x00						@ unused
-	.long	PTE_CACHEABLE | PTE_BUFFERABLE | PTE_EXT_APX	@ L_PTE_MT_VECTORS
+	.long	0x00						@ unused
 	.endm
 
 	.macro	armv6_set_pte_ext pfx
-- 
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2020-10-23  9:29 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-23  9:14 [PATCH v2 0/4] arm: support get_user_pages_fast Miles Chen
2020-10-23  9:14 ` [PATCH v2 1/4] arm: mm: use strict p[gum]d types Miles Chen
2020-10-23  9:14 ` Miles Chen [this message]
2020-10-23 10:16   ` [PATCH v2 2/4] arm: mm: reordering memory type table Russell King - ARM Linux admin
2020-10-27  8:03     ` Miles Chen
2020-10-23  9:14 ` [PATCH v2 3/4] arm: mm: introduce L_PTE_SPECIAL Miles Chen
2020-10-23 10:08   ` Russell King - ARM Linux admin
2020-10-27  7:45     ` Miles Chen
2020-10-27  9:11       ` Russell King - ARM Linux admin
2020-11-01 12:48         ` Miles Chen
2020-10-23  9:14 ` [PATCH v2 4/4] arm: replace vector mem type with read-only type Miles Chen
2020-10-23 10:12   ` Russell King - ARM Linux admin
2020-10-27  7:41     ` Miles Chen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201023091437.8225-3-miles.chen@mediatek.com \
    --to=miles.chen@mediatek.com \
    --cc=catalin.marinas@arm.com \
    --cc=horms@verge.net.au \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux@armlinux.org.uk \
    --cc=minchan@kernel.org \
    --cc=steve.capper@linaro.org \
    --cc=surenb@google.com \
    --cc=will.deacon@arm.com \
    --cc=wsd_upstream@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).