[PATCH AUTOSEL 4.9 06/30] ARM: 8997/2: hw_breakpoint: Handle inexact watchpoint addresses

[PATCH AUTOSEL 4.9 06/30] ARM: 8997/2: hw_breakpoint: Handle inexact watchpoint addresses

[Sasha Levin]

From: Douglas Anderson <dianders@chromium.org>

[ Upstream commit 22c9e58299e5f18274788ce54c03d4fb761e3c5d ]

This is commit fdfeff0f9e3d ("arm64: hw_breakpoint: Handle inexact
watchpoint addresses") but ported to arm32, which has the same
problem.

This problem was found by Android CTS tests, notably the
"watchpoint_imprecise" test [1].  I tested locally against a copycat
(simplified) version of the test though.

[1] https://android.googlesource.com/platform/bionic/+/master/tests/sys_ptrace_test.cpp

Link: https://lkml.kernel.org/r/20191019111216.1.I82eae759ca6dc28a245b043f485ca490e3015321@changeid

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/kernel/hw_breakpoint.c | 100 +++++++++++++++++++++++---------
 1 file changed, 72 insertions(+), 28 deletions(-)

diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c
index 283084f6286d9..671dbc28e5d46 100644
--- a/arch/arm/kernel/hw_breakpoint.c
+++ b/arch/arm/kernel/hw_breakpoint.c
@@ -688,6 +688,40 @@ static void disable_single_step(struct perf_event *bp)
 	arch_install_hw_breakpoint(bp);
 }
 
+/*
+ * Arm32 hardware does not always report a watchpoint hit address that matches
+ * one of the watchpoints set. It can also report an address "near" the
+ * watchpoint if a single instruction access both watched and unwatched
+ * addresses. There is no straight-forward way, short of disassembling the
+ * offending instruction, to map that address back to the watchpoint. This
+ * function computes the distance of the memory access from the watchpoint as a
+ * heuristic for the likelyhood that a given access triggered the watchpoint.
+ *
+ * See this same function in the arm64 platform code, which has the same
+ * problem.
+ *
+ * The function returns the distance of the address from the bytes watched by
+ * the watchpoint. In case of an exact match, it returns 0.
+ */
+static u32 get_distance_from_watchpoint(unsigned long addr, u32 val,
+					struct arch_hw_breakpoint_ctrl *ctrl)
+{
+	u32 wp_low, wp_high;
+	u32 lens, lene;
+
+	lens = __ffs(ctrl->len);
+	lene = __fls(ctrl->len);
+
+	wp_low = val + lens;
+	wp_high = val + lene;
+	if (addr < wp_low)
+		return wp_low - addr;
+	else if (addr > wp_high)
+		return addr - wp_high;
+	else
+		return 0;
+}
+
 static int watchpoint_fault_on_uaccess(struct pt_regs *regs,
 				       struct arch_hw_breakpoint *info)
 {
@@ -697,23 +731,25 @@ static int watchpoint_fault_on_uaccess(struct pt_regs *regs,
 static void watchpoint_handler(unsigned long addr, unsigned int fsr,
 			       struct pt_regs *regs)
 {
-	int i, access;
-	u32 val, ctrl_reg, alignment_mask;
+	int i, access, closest_match = 0;
+	u32 min_dist = -1, dist;
+	u32 val, ctrl_reg;
 	struct perf_event *wp, **slots;
 	struct arch_hw_breakpoint *info;
 	struct arch_hw_breakpoint_ctrl ctrl;
 
 	slots = this_cpu_ptr(wp_on_reg);
 
+	/*
+	 * Find all watchpoints that match the reported address. If no exact
+	 * match is found. Attribute the hit to the closest watchpoint.
+	 */
+	rcu_read_lock();
 	for (i = 0; i < core_num_wrps; ++i) {
-		rcu_read_lock();
-
 		wp = slots[i];
-
 		if (wp == NULL)
-			goto unlock;
+			continue;
 
-		info = counter_arch_bp(wp);
 		/*
 		 * The DFAR is an unknown value on debug architectures prior
 		 * to 7.1. Since we only allow a single watchpoint on these
@@ -722,33 +758,31 @@ static void watchpoint_handler(unsigned long addr, unsigned int fsr,
 		 */
 		if (debug_arch < ARM_DEBUG_ARCH_V7_1) {
 			BUG_ON(i > 0);
+			info = counter_arch_bp(wp);
 			info->trigger = wp->attr.bp_addr;
 		} else {
-			if (info->ctrl.len == ARM_BREAKPOINT_LEN_8)
-				alignment_mask = 0x7;
-			else
-				alignment_mask = 0x3;
-
-			/* Check if the watchpoint value matches. */
-			val = read_wb_reg(ARM_BASE_WVR + i);
-			if (val != (addr & ~alignment_mask))
-				goto unlock;
-
-			/* Possible match, check the byte address select. */
-			ctrl_reg = read_wb_reg(ARM_BASE_WCR + i);
-			decode_ctrl_reg(ctrl_reg, &ctrl);
-			if (!((1 << (addr & alignment_mask)) & ctrl.len))
-				goto unlock;
-
 			/* Check that the access type matches. */
 			if (debug_exception_updates_fsr()) {
 				access = (fsr & ARM_FSR_ACCESS_MASK) ?
 					  HW_BREAKPOINT_W : HW_BREAKPOINT_R;
 				if (!(access & hw_breakpoint_type(wp)))
-					goto unlock;
+					continue;
 			}
 
+			val = read_wb_reg(ARM_BASE_WVR + i);
+			ctrl_reg = read_wb_reg(ARM_BASE_WCR + i);
+			decode_ctrl_reg(ctrl_reg, &ctrl);
+			dist = get_distance_from_watchpoint(addr, val, &ctrl);
+			if (dist < min_dist) {
+				min_dist = dist;
+				closest_match = i;
+			}
+			/* Is this an exact match? */
+			if (dist != 0)
+				continue;
+
 			/* We have a winner. */
+			info = counter_arch_bp(wp);
 			info->trigger = addr;
 		}
 
@@ -770,13 +804,23 @@ static void watchpoint_handler(unsigned long addr, unsigned int fsr,
 		 * we can single-step over the watchpoint trigger.
 		 */
 		if (!is_default_overflow_handler(wp))
-			goto unlock;
-
+			continue;
 step:
 		enable_single_step(wp, instruction_pointer(regs));
-unlock:
-		rcu_read_unlock();
 	}
+
+	if (min_dist > 0 && min_dist != -1) {
+		/* No exact match found. */
+		wp = slots[closest_match];
+		info = counter_arch_bp(wp);
+		info->trigger = addr;
+		pr_debug("watchpoint fired: address = 0x%x\n", info->trigger);
+		perf_bp_event(wp, regs);
+		if (is_default_overflow_handler(wp))
+			enable_single_step(wp, instruction_pointer(regs));
+	}
+
+	rcu_read_unlock();
 }
 
 static void watchpoint_single_step_handler(unsigned long pc)
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 4.9 14/30] cpufreq: sti-cpufreq: add stih418 support

[Sasha Levin]

From: Alain Volmat <avolmat@me.com>

[ Upstream commit 01a163c52039e9426c7d3d3ab16ca261ad622597 ]

The STiH418 can be controlled the same way as STiH407 &
STiH410 regarding cpufreq.

Signed-off-by: Alain Volmat <avolmat@me.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpufreq/sti-cpufreq.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/cpufreq/sti-cpufreq.c b/drivers/cpufreq/sti-cpufreq.c
index b366e6d830ea3..2cb3346e82d35 100644
--- a/drivers/cpufreq/sti-cpufreq.c
+++ b/drivers/cpufreq/sti-cpufreq.c
@@ -144,7 +144,8 @@ static const struct reg_field sti_stih407_dvfs_regfields[DVFS_MAX_REGFIELDS] = {
 static const struct reg_field *sti_cpufreq_match(void)
 {
 	if (of_machine_is_compatible("st,stih407") ||
-	    of_machine_is_compatible("st,stih410"))
+	    of_machine_is_compatible("st,stih410") ||
+	    of_machine_is_compatible("st,stih418"))
 		return sti_stih407_dvfs_regfields;
 
 	return NULL;
@@ -260,7 +261,8 @@ static int sti_cpufreq_init(void)
 	int ret;
 
 	if ((!of_machine_is_compatible("st,stih407")) &&
-		(!of_machine_is_compatible("st,stih410")))
+		(!of_machine_is_compatible("st,stih410")) &&
+		(!of_machine_is_compatible("st,stih418")))
 		return -ENODEV;
 
 	ddata.cpu = get_cpu_device(0);
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 4.9 16/30] arm64/mm: return cpu_all_mask when node is NUMA_NO_NODE

[Sasha Levin]

From: Zhengyuan Liu <liuzhengyuan@tj.kylinos.cn>

[ Upstream commit a194c5f2d2b3a05428805146afcabe5140b5d378 ]

The @node passed to cpumask_of_node() can be NUMA_NO_NODE, in that
case it will trigger the following WARN_ON(node >= nr_node_ids) due to
mismatched data types of @node and @nr_node_ids. Actually we should
return cpu_all_mask just like most other architectures do if passed
NUMA_NO_NODE.

Also add a similar check to the inline cpumask_of_node() in numa.h.

Signed-off-by: Zhengyuan Liu <liuzhengyuan@tj.kylinos.cn>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Link: https://lore.kernel.org/r/20200921023936.21846-1-liuzhengyuan@tj.kylinos.cn
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/include/asm/numa.h | 3 +++
 arch/arm64/mm/numa.c          | 6 +++++-
 2 files changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/include/asm/numa.h b/arch/arm64/include/asm/numa.h
index 600887e491fdf..496070f97c541 100644
--- a/arch/arm64/include/asm/numa.h
+++ b/arch/arm64/include/asm/numa.h
@@ -25,6 +25,9 @@ const struct cpumask *cpumask_of_node(int node);
 /* Returns a pointer to the cpumask of CPUs on Node 'node'. */
 static inline const struct cpumask *cpumask_of_node(int node)
 {
+	if (node == NUMA_NO_NODE)
+		return cpu_all_mask;
+
 	return node_to_cpumask_map[node];
 }
 #endif
diff --git a/arch/arm64/mm/numa.c b/arch/arm64/mm/numa.c
index b1e42bad69ac3..fddae9b8e1bf1 100644
--- a/arch/arm64/mm/numa.c
+++ b/arch/arm64/mm/numa.c
@@ -58,7 +58,11 @@ EXPORT_SYMBOL(node_to_cpumask_map);
  */
 const struct cpumask *cpumask_of_node(int node)
 {
-	if (WARN_ON(node >= nr_node_ids))
+
+	if (node == NUMA_NO_NODE)
+		return cpu_all_mask;
+
+	if (WARN_ON(node < 0 || node >= nr_node_ids))
 		return cpu_none_mask;
 
 	if (WARN_ON(node_to_cpumask_map[node] == NULL))
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 4.9 28/30] ARM: dts: s5pv210: remove DMA controller bus node name to fix dtschema warnings

[Sasha Levin]

From: Krzysztof Kozlowski <krzk@kernel.org>

[ Upstream commit ea4e792f3c8931fffec4d700cf6197d84e9f35a6 ]

There is no need to keep DMA controller nodes under AMBA bus node.
Remove the "amba" node to fix dtschema warnings like:

  amba: $nodename:0: 'amba' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Jonathan Bakker <xc-racer2@live.ca>
Link: https://lore.kernel.org/r/20200907161141.31034-6-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/s5pv210.dtsi | 49 +++++++++++++++-------------------
 1 file changed, 21 insertions(+), 28 deletions(-)

diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi
index 0c10ba517cd04..57f64a7160290 100644
--- a/arch/arm/boot/dts/s5pv210.dtsi
+++ b/arch/arm/boot/dts/s5pv210.dtsi
@@ -129,35 +129,28 @@ wakeup-interrupt-controller {
 			};
 		};
 
-		amba {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges;
-
-			pdma0: dma@e0900000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0xe0900000 0x1000>;
-				interrupt-parent = <&vic0>;
-				interrupts = <19>;
-				clocks = <&clocks CLK_PDMA0>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
+		pdma0: dma@e0900000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0xe0900000 0x1000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <19>;
+			clocks = <&clocks CLK_PDMA0>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
+		};
 
-			pdma1: dma@e0a00000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0xe0a00000 0x1000>;
-				interrupt-parent = <&vic0>;
-				interrupts = <20>;
-				clocks = <&clocks CLK_PDMA1>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
+		pdma1: dma@e0a00000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0xe0a00000 0x1000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <20>;
+			clocks = <&clocks CLK_PDMA1>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
 		};
 
 		spi0: spi@e1300000 {
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 4.9 29/30] ARM: dts: s5pv210: move PMU node out of clock controller

[Sasha Levin]

From: Krzysztof Kozlowski <krzk@kernel.org>

[ Upstream commit bb98fff84ad1ea321823759edaba573a16fa02bd ]

The Power Management Unit (PMU) is a separate device which has little
common with clock controller.  Moving it to one level up (from clock
controller child to SoC) allows to remove fake simple-bus compatible and
dtbs_check warnings like:

  clock-controller@e0100000: $nodename:0:
    'clock-controller@e0100000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Jonathan Bakker <xc-racer2@live.ca>
Link: https://lore.kernel.org/r/20200907161141.31034-8-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/s5pv210.dtsi | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi
index 57f64a7160290..afc3eac0aba78 100644
--- a/arch/arm/boot/dts/s5pv210.dtsi
+++ b/arch/arm/boot/dts/s5pv210.dtsi
@@ -101,19 +101,16 @@ chipid@e0000000 {
 		};
 
 		clocks: clock-controller@e0100000 {
-			compatible = "samsung,s5pv210-clock", "simple-bus";
+			compatible = "samsung,s5pv210-clock";
 			reg = <0xe0100000 0x10000>;
 			clock-names = "xxti", "xusbxti";
 			clocks = <&xxti>, <&xusbxti>;
 			#clock-cells = <1>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+		};
 
-			pmu_syscon: syscon@e0108000 {
-				compatible = "samsung-s5pv210-pmu", "syscon";
-				reg = <0xe0108000 0x8000>;
-			};
+		pmu_syscon: syscon@e0108000 {
+			compatible = "samsung-s5pv210-pmu", "syscon";
+			reg = <0xe0108000 0x8000>;
 		};
 
 		pinctrl0: pinctrl@e0200000 {
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 4.9 30/30] ARM: dts: s5pv210: remove dedicated 'audio-subsystem' node

[Sasha Levin]

From: Krzysztof Kozlowski <krzk@kernel.org>

[ Upstream commit 6c17a2974abf68a58517f75741b15c4aba42b4b8 ]

The 'audio-subsystem' node is an artificial creation, not representing
real hardware.  The hardware is described by its nodes - AUDSS clock
controller and I2S0.

Remove the 'audio-subsystem' node along with its undocumented compatible
to fix dtbs_check warnings like:

  audio-subsystem: $nodename:0: 'audio-subsystem' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Jonathan Bakker <xc-racer2@live.ca>
Link: https://lore.kernel.org/r/20200907161141.31034-9-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/s5pv210.dtsi | 65 +++++++++++++++-------------------
 1 file changed, 29 insertions(+), 36 deletions(-)

diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi
index afc3eac0aba78..798f676041e09 100644
--- a/arch/arm/boot/dts/s5pv210.dtsi
+++ b/arch/arm/boot/dts/s5pv210.dtsi
@@ -220,43 +220,36 @@ i2c2: i2c@e1a00000 {
 			status = "disabled";
 		};
 
-		audio-subsystem {
-			compatible = "samsung,s5pv210-audss", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			clk_audss: clock-controller@eee10000 {
-				compatible = "samsung,s5pv210-audss-clock";
-				reg = <0xeee10000 0x1000>;
-				clock-names = "hclk", "xxti",
-						"fout_epll",
-						"sclk_audio0";
-				clocks = <&clocks DOUT_HCLKP>, <&xxti>,
-						<&clocks FOUT_EPLL>,
-						<&clocks SCLK_AUDIO0>;
-				#clock-cells = <1>;
-			};
+		clk_audss: clock-controller@eee10000 {
+			compatible = "samsung,s5pv210-audss-clock";
+			reg = <0xeee10000 0x1000>;
+			clock-names = "hclk", "xxti",
+				      "fout_epll",
+				      "sclk_audio0";
+			clocks = <&clocks DOUT_HCLKP>, <&xxti>,
+				 <&clocks FOUT_EPLL>,
+				 <&clocks SCLK_AUDIO0>;
+			#clock-cells = <1>;
+		};
 
-			i2s0: i2s@eee30000 {
-				compatible = "samsung,s5pv210-i2s";
-				reg = <0xeee30000 0x1000>;
-				interrupt-parent = <&vic2>;
-				interrupts = <16>;
-				dma-names = "rx", "tx", "tx-sec";
-				dmas = <&pdma1 9>, <&pdma1 10>, <&pdma1 11>;
-				clock-names = "iis",
-						"i2s_opclk0",
-						"i2s_opclk1";
-				clocks = <&clk_audss CLK_I2S>,
-						<&clk_audss CLK_I2S>,
-						<&clk_audss CLK_DOUT_AUD_BUS>;
-				samsung,idma-addr = <0xc0010000>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2s0_bus>;
-				#sound-dai-cells = <0>;
-				status = "disabled";
-			};
+		i2s0: i2s@eee30000 {
+			compatible = "samsung,s5pv210-i2s";
+			reg = <0xeee30000 0x1000>;
+			interrupt-parent = <&vic2>;
+			interrupts = <16>;
+			dma-names = "rx", "tx", "tx-sec";
+			dmas = <&pdma1 9>, <&pdma1 10>, <&pdma1 11>;
+			clock-names = "iis",
+				      "i2s_opclk0",
+				      "i2s_opclk1";
+			clocks = <&clk_audss CLK_I2S>,
+				 <&clk_audss CLK_I2S>,
+				 <&clk_audss CLK_DOUT_AUD_BUS>;
+			samsung,idma-addr = <0xc0010000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s0_bus>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
 		};
 
 		i2s1: i2s@e2100000 {
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel