[RFC PATCH 2/2] clk: sunxi-ng: a64: disable mux and pll notifiers for CPUX reclocking

[Icenowy Zheng <icenowy@aosc.io>]

After the dividers of PLL-CPUX disabled, there's no need for PLL-CPUX to
be gated when tweaking the clock of CPUX, thus reparenting CPUX to
osc24M is also now not needed.

Remove these notifiers.

Preventing reparenting CPUX is said to be able to help solving the issue
that the timer jumps backward according to Ondrej Jirman.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
---
 drivers/clk/sunxi-ng/ccu-sun50i-a64.c | 14 +-------------
 1 file changed, 1 insertion(+), 13 deletions(-)

diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
index 6108d150a0e3..67d570efe5bd 100644
--- a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
@@ -943,7 +943,6 @@ static int sun50i_a64_ccu_probe(struct platform_device *pdev)
 	struct resource *res;
 	void __iomem *reg;
 	u32 val;
-	int ret;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	reg = devm_ioremap_resource(&pdev->dev, res);
@@ -1029,18 +1028,7 @@ static int sun50i_a64_ccu_probe(struct platform_device *pdev)
 		writel(val, reg + SUN50I_A64_CPUX_AXI_REG);
 	}
 
-	ret = sunxi_ccu_probe(pdev->dev.of_node, reg, &sun50i_a64_ccu_desc);
-	if (ret)
-		return ret;
-
-	/* Gate then ungate PLL CPU after any rate changes */
-	ccu_pll_notifier_register(&sun50i_a64_pll_cpu_nb);
-
-	/* Reparent CPU during PLL CPU rate changes */
-	ccu_mux_notifier_register(pll_cpux_clk.common.hw.clk,
-				  &sun50i_a64_cpu_nb);
-
-	return 0;
+	return sunxi_ccu_probe(pdev->dev.of_node, reg, &sun50i_a64_ccu_desc);
 }
 
 static const struct of_device_id sun50i_a64_ccu_ids[] = {
-- 
2.28.0

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel