[PATCHv2 0/9] Genpd related code changes to drop am335x pdata

[PATCHv2 0/9] Genpd related code changes to drop am335x pdata

[Tony Lindgren]

Hi all,

Here's v2 set of changes for v5.11 merge window to drop the remaining
am335x platform data.

Changes since v1:
- Simplify wkup_m3_rproc.c changes as suggested by Philipp Zabel
- Do not configure pm_clk for omap_prm.c except for simple-pm-bus

These patches depend on:

[PATCH 2/4] ARM: OMAP2+: Fix missing select PM_GENERIC_DOMAINS_OF

And the related device tree changes have been posted as:

[PATCH 00/18] Drop remaining pdata for am335x and use genpd

Regards,

Tony


Tero Kristo (1):
  soc: ti: omap-prm: am3: add genpd support for remaining PRM instances

Tony Lindgren (8):
  ARM: OMAP2+: Check for inited flag
  ARM: OMAP2+: Probe PRCM first to probe l4_wkup with simple-pm-bus
  clk: ti: am33xx: Keep am3 l3 main clock always on for genpd
  bus: ti-sysc: Support modules without control registers
  bus: ti-sysc: Implement GPMC debug quirk to drop platform data
  soc: ti: omap-prm: Add pm_clk for genpd
  soc: ti: pm33xx: Enable basic PM runtime support for genpd
  remoteproc/wkup_m3: Use reset control driver if available

 arch/arm/mach-omap2/omap_hwmod.c      |  6 ++
 arch/arm/mach-omap2/pdata-quirks.c    | 11 ++++
 drivers/bus/ti-sysc.c                 | 17 ++++++
 drivers/clk/ti/clk-33xx.c             |  2 +
 drivers/remoteproc/wkup_m3_rproc.c    | 41 +++++++++-----
 drivers/soc/ti/omap_prm.c             | 80 ++++++++++++++++++++++++++-
 drivers/soc/ti/pm33xx.c               | 17 +++++-
 include/linux/platform_data/ti-sysc.h |  1 +
 8 files changed, 157 insertions(+), 18 deletions(-)

-- 
2.29.2

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 1/9] ARM: OMAP2+: Check for inited flag

[Tony Lindgren]

If we have no hwmods configured and omap_hwmod_init() is not called,
we don't want to call omap_hwmod_setup_all() as it will fail with
checks for configured MPU at least.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/omap_hwmod.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -627,6 +627,9 @@ static struct clockdomain *_get_clkdm(struct omap_hwmod *oh)
 {
 	struct clk_hw_omap *clk;
 
+	if (!oh)
+		return NULL;
+
 	if (oh->clkdm) {
 		return oh->clkdm;
 	} else if (oh->_clk) {
@@ -3677,6 +3680,9 @@ static void __init omap_hwmod_setup_earlycon_flags(void)
  */
 static int __init omap_hwmod_setup_all(void)
 {
+	if (!inited)
+		return 0;
+
 	_ensure_mpu_hwmod_is_setup(NULL);
 
 	omap_hwmod_for_each(_init, NULL);
-- 
2.29.2

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 2/9] ARM: OMAP2+: Probe PRCM first to probe l4_wkup with simple-pm-bus

[Tony Lindgren]

In preparation for probing the interconnects with simple-pm-bus to
make use of genpd, we need to probe the always-on PRCM first for the
clocks needed by l4_wkup instance.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/pdata-quirks.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -580,6 +580,8 @@ static void pdata_quirks_check(struct pdata_init *quirks)
 
 void __init pdata_quirks_init(const struct of_device_id *omap_dt_match_table)
 {
+	struct device_node *np;
+
 	/*
 	 * We still need this for omap2420 and omap3 PM to work, others are
 	 * using drivers/misc/sram.c already.
@@ -591,6 +593,15 @@ void __init pdata_quirks_init(const struct of_device_id *omap_dt_match_table)
 	if (of_machine_is_compatible("ti,omap3"))
 		omap3_mcbsp_init();
 	pdata_quirks_check(auxdata_quirks);
+
+	/* Populate always-on PRCM in l4_wkup to probe l4_wkup */
+	np = of_find_node_by_name(NULL, "prcm");
+	if (!np)
+		np = of_find_node_by_name(NULL, "prm");
+	if (np)
+		of_platform_populate(np, omap_dt_match_table,
+				     omap_auxdata_lookup, NULL);
+
 	of_platform_populate(NULL, omap_dt_match_table,
 			     omap_auxdata_lookup, NULL);
 	pdata_quirks_check(pdata_quirks);
-- 
2.29.2

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 3/9] clk: ti: am33xx: Keep am3 l3 main clock always on for genpd

[Tony Lindgren]

In order for suspend and resume to work with genpd on am3, we must keep
l3 main clock always on. Otherwise prm_omap driver will shut down the l3
main clock on suspend when simple-pm-bus and GENPD_FLAG_PM_CLK are used.
Note that we already keep the l3 main clock always on with the legacy
platform code.

Later on we may want to start managing the l3 main clock with a dedicated
interconnect driver instead of using simple-pm-bus and GENPD_FLAG_PM_CLK.

Cc: linux-clk@vger.kernel.org
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/clk/ti/clk-33xx.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/clk/ti/clk-33xx.c b/drivers/clk/ti/clk-33xx.c
--- a/drivers/clk/ti/clk-33xx.c
+++ b/drivers/clk/ti/clk-33xx.c
@@ -266,6 +266,8 @@ static const char *enable_init_clks[] = {
 	"dpll_ddr_m2_ck",
 	"dpll_mpu_m2_ck",
 	"l3_gclk",
+	/* AM3_L3_L3_MAIN_CLKCTRL, needed during suspend */
+	"l3-clkctrl:00bc:0",
 	"l4hs_gclk",
 	"l4fw_gclk",
 	"l4ls_gclk",
-- 
2.29.2

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 3/9] clk: ti: am33xx: Keep am3 l3 main clock always on for genpd

[Stephen Boyd]

Quoting Tony Lindgren (2020-11-10 03:20:36)
> In order for suspend and resume to work with genpd on am3, we must keep
> l3 main clock always on. Otherwise prm_omap driver will shut down the l3
> main clock on suspend when simple-pm-bus and GENPD_FLAG_PM_CLK are used.
> Note that we already keep the l3 main clock always on with the legacy
> platform code.
> 
> Later on we may want to start managing the l3 main clock with a dedicated
> interconnect driver instead of using simple-pm-bus and GENPD_FLAG_PM_CLK.
> 
> Cc: linux-clk@vger.kernel.org
> Cc: Michael Turquette <mturquette@baylibre.com>
> Cc: Stephen Boyd <sboyd@kernel.org>
> Cc: Tero Kristo <t-kristo@ti.com>
> Signed-off-by: Tony Lindgren <tony@atomide.com>
> ---

Acked-by: Stephen Boyd <sboyd@kernel.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 4/9] bus: ti-sysc: Support modules without control registers

[Tony Lindgren]

Some modules like MPU have a powerdomain and functional clock but not
necessarily any control registers. Let's allow configuring interconnect
target modules with no control registers.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/bus/ti-sysc.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -853,8 +853,12 @@ static int sysc_ioremap(struct sysc *ddata)
  */
 static int sysc_map_and_check_registers(struct sysc *ddata)
 {
+	struct device_node *np = ddata->dev->of_node;
 	int error;
 
+	if (!of_get_property(np, "reg", NULL))
+		return 0;
+
 	error = sysc_parse_and_check_child_range(ddata);
 	if (error)
 		return error;
@@ -2911,6 +2915,9 @@ static int sysc_probe(struct platform_device *pdev)
 	if (!ddata)
 		return -ENOMEM;
 
+	ddata->offsets[SYSC_REVISION] = -ENODEV;
+	ddata->offsets[SYSC_SYSCONFIG] = -ENODEV;
+	ddata->offsets[SYSC_SYSSTATUS] = -ENODEV;
 	ddata->dev = &pdev->dev;
 	platform_set_drvdata(pdev, ddata);
 
-- 
2.29.2

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 5/9] bus: ti-sysc: Implement GPMC debug quirk to drop platform data

[Tony Lindgren]

We need to enable no-reset-on-init quirk for GPMC if the config
option for CONFIG_OMAP_GPMC_DEBUG is set. Otherwise the GPMC
driver code is unable to show the bootloader configured timings.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/bus/ti-sysc.c                 | 10 ++++++++++
 include/linux/platform_data/ti-sysc.h |  1 +
 2 files changed, 11 insertions(+)

diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -1383,6 +1383,8 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
 		   SYSC_QUIRK_CLKDM_NOAUTO),
 	SYSC_QUIRK("dwc3", 0x488c0000, 0, 0x10, -ENODEV, 0x500a0200, 0xffffffff,
 		   SYSC_QUIRK_CLKDM_NOAUTO),
+	SYSC_QUIRK("gpmc", 0, 0, 0x10, 0x14, 0x00000060, 0xffffffff,
+		   SYSC_QUIRK_GPMC_DEBUG),
 	SYSC_QUIRK("hdmi", 0, 0, 0x10, -ENODEV, 0x50030200, 0xffffffff,
 		   SYSC_QUIRK_OPT_CLKS_NEEDED),
 	SYSC_QUIRK("hdq1w", 0, 0, 0x14, 0x18, 0x00000006, 0xffffffff,
@@ -1818,6 +1820,14 @@ static void sysc_init_module_quirks(struct sysc *ddata)
 		return;
 	}
 
+#ifdef CONFIG_OMAP_GPMC_DEBUG
+	if (ddata->cfg.quirks & SYSC_QUIRK_GPMC_DEBUG) {
+		ddata->cfg.quirks |= SYSC_QUIRK_NO_RESET_ON_INIT;
+
+		return;
+	}
+#endif
+
 	if (ddata->cfg.quirks & SYSC_MODULE_QUIRK_I2C) {
 		ddata->pre_reset_quirk = sysc_pre_reset_quirk_i2c;
 		ddata->post_reset_quirk = sysc_post_reset_quirk_i2c;
diff --git a/include/linux/platform_data/ti-sysc.h b/include/linux/platform_data/ti-sysc.h
--- a/include/linux/platform_data/ti-sysc.h
+++ b/include/linux/platform_data/ti-sysc.h
@@ -50,6 +50,7 @@ struct sysc_regbits {
 	s8 emufree_shift;
 };
 
+#define SYSC_QUIRK_GPMC_DEBUG		BIT(26)
 #define SYSC_MODULE_QUIRK_ENA_RESETDONE	BIT(25)
 #define SYSC_MODULE_QUIRK_PRUSS		BIT(24)
 #define SYSC_MODULE_QUIRK_DSS_RESET	BIT(23)
-- 
2.29.2

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 6/9] soc: ti: omap-prm: Add pm_clk for genpd

[Tony Lindgren]

In order to probe l3 and l4 interconnects with simple-pm-bus, we want
genpd to manage the clocks for the interconnects. For interconnect target
modules, we already have ti-sysc manage the clocks so let's skipe managing
clocks for ti-sysc modules.

Cc: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/soc/ti/omap_prm.c | 44 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 44 insertions(+)

diff --git a/drivers/soc/ti/omap_prm.c b/drivers/soc/ti/omap_prm.c
--- a/drivers/soc/ti/omap_prm.c
+++ b/drivers/soc/ti/omap_prm.c
@@ -7,6 +7,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/clk.h>
 #include <linux/device.h>
 #include <linux/io.h>
 #include <linux/iopoll.h>
@@ -14,6 +15,7 @@
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
+#include <linux/pm_clock.h>
 #include <linux/pm_domain.h>
 #include <linux/reset-controller.h>
 #include <linux/delay.h>
@@ -41,6 +43,7 @@ struct omap_prm_domain {
 	u16 pwrstst;
 	const struct omap_prm_domain_map *cap;
 	u32 pwrstctrl_saved;
+	unsigned int uses_pm_clk:1;
 };
 
 struct omap_rst_map {
@@ -325,6 +328,38 @@ static int omap_prm_domain_power_off(struct generic_pm_domain *domain)
 	return 0;
 }
 
+/*
+ * Note that ti-sysc already manages the module clocks separately so
+ * no need to manage those. Interconnect instances need clocks managed
+ * for simple-pm-bus.
+ */
+static int omap_prm_domain_attach_clock(struct device *dev,
+					struct omap_prm_domain *prmd)
+{
+	struct device_node *np = dev->of_node;
+	int error;
+
+	if (!of_device_is_compatible(np, "simple-pm-bus"))
+		return 0;
+
+	if (!of_property_read_bool(np, "clocks"))
+		return 0;
+
+	error = pm_clk_create(dev);
+	if (error)
+		return error;
+
+	error = of_pm_clk_add_clks(dev);
+	if (error < 0) {
+		pm_clk_destroy(dev);
+		return error;
+	}
+
+	prmd->uses_pm_clk = 1;
+
+	return 0;
+}
+
 static int omap_prm_domain_attach_dev(struct generic_pm_domain *domain,
 				      struct device *dev)
 {
@@ -349,6 +384,10 @@ static int omap_prm_domain_attach_dev(struct generic_pm_domain *domain,
 	genpd_data = dev_gpd_data(dev);
 	genpd_data->data = NULL;
 
+	ret = omap_prm_domain_attach_clock(dev, prmd);
+	if (ret)
+		return ret;
+
 	return 0;
 }
 
@@ -356,7 +395,11 @@ static void omap_prm_domain_detach_dev(struct generic_pm_domain *domain,
 				       struct device *dev)
 {
 	struct generic_pm_domain_data *genpd_data;
+	struct omap_prm_domain *prmd;
 
+	prmd = genpd_to_prm_domain(domain);
+	if (prmd->uses_pm_clk)
+		pm_clk_destroy(dev);
 	genpd_data = dev_gpd_data(dev);
 	genpd_data->data = NULL;
 }
@@ -393,6 +436,7 @@ static int omap_prm_domain_init(struct device *dev, struct omap_prm *prm)
 	prmd->pd.power_off = omap_prm_domain_power_off;
 	prmd->pd.attach_dev = omap_prm_domain_attach_dev;
 	prmd->pd.detach_dev = omap_prm_domain_detach_dev;
+	prmd->pd.flags = GENPD_FLAG_PM_CLK;
 
 	pm_genpd_init(&prmd->pd, NULL, true);
 	error = of_genpd_add_provider_simple(np, &prmd->pd);
-- 
2.29.2

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 7/9] soc: ti: omap-prm: am3: add genpd support for remaining PRM instances

[Tony Lindgren]

From: Tero Kristo <t-kristo@ti.com>

Add genpd support for per, wkup, mpu, rtc and cefuse instances.

Cc: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/soc/ti/omap_prm.c | 36 +++++++++++++++++++++++++++++++++---
 1 file changed, 33 insertions(+), 3 deletions(-)

diff --git a/drivers/soc/ti/omap_prm.c b/drivers/soc/ti/omap_prm.c
--- a/drivers/soc/ti/omap_prm.c
+++ b/drivers/soc/ti/omap_prm.c
@@ -124,6 +124,10 @@ static const struct omap_prm_domain_map omap_prm_onoff_noauto = {
 	.statechange = 1,
 };
 
+static const struct omap_prm_domain_map omap_prm_alwon = {
+	.usable_modes = BIT(OMAP_PRMD_ON_ACTIVE),
+};
+
 static const struct omap_rst_map rst_map_0[] = {
 	{ .rst = 0, .st = 0 },
 	{ .rst = -1 },
@@ -190,14 +194,40 @@ static const struct omap_rst_map am3_wkup_rst_map[] = {
 };
 
 static const struct omap_prm_data am3_prm_data[] = {
-	{ .name = "per", .base = 0x44e00c00, .rstctrl = 0x0, .rstmap = am3_per_rst_map, .flags = OMAP_PRM_HAS_RSTCTRL, .clkdm_name = "pruss_ocp" },
-	{ .name = "wkup", .base = 0x44e00d00, .rstctrl = 0x0, .rstst = 0xc, .rstmap = am3_wkup_rst_map, .flags = OMAP_PRM_HAS_RSTCTRL | OMAP_PRM_HAS_NO_CLKDM },
-	{ .name = "device", .base = 0x44e00f00, .rstctrl = 0x0, .rstst = 0x8, .rstmap = rst_map_01, .flags = OMAP_PRM_HAS_RSTCTRL | OMAP_PRM_HAS_NO_CLKDM },
+	{
+		.name = "per", .base = 0x44e00c00,
+		.pwrstctrl = 0xc, .pwrstst = 0x8, .dmap = &omap_prm_noinact,
+		.rstctrl = 0x0, .rstmap = am3_per_rst_map,
+		.flags = OMAP_PRM_HAS_RSTCTRL, .clkdm_name = "pruss_ocp"
+	},
+	{
+		.name = "wkup", .base = 0x44e00d00,
+		.pwrstctrl = 0x4, .pwrstst = 0x4, .dmap = &omap_prm_alwon,
+		.rstctrl = 0x0, .rstst = 0xc, .rstmap = am3_wkup_rst_map,
+		.flags = OMAP_PRM_HAS_RSTCTRL | OMAP_PRM_HAS_NO_CLKDM
+	},
+	{
+		.name = "mpu", .base = 0x44e00e00,
+		.pwrstctrl = 0x0, .pwrstst = 0x4, .dmap = &omap_prm_noinact,
+	},
+	{
+		.name = "device", .base = 0x44e00f00,
+		.rstctrl = 0x0, .rstst = 0x8, .rstmap = rst_map_01,
+		.flags = OMAP_PRM_HAS_RSTCTRL | OMAP_PRM_HAS_NO_CLKDM
+	},
+	{
+		.name = "rtc", .base = 0x44e01000,
+		.pwrstctrl = 0x0, .pwrstst = 0x4, .dmap = &omap_prm_alwon,
+	},
 	{
 		.name = "gfx", .base = 0x44e01100,
 		.pwrstctrl = 0, .pwrstst = 0x10, .dmap = &omap_prm_noinact,
 		.rstctrl = 0x4, .rstst = 0x14, .rstmap = rst_map_0, .clkdm_name = "gfx_l3",
 	},
+	{
+		.name = "cefuse", .base = 0x44e01200,
+		.pwrstctrl = 0x0, .pwrstst = 0x4, .dmap = &omap_prm_onoff_noauto,
+	},
 	{ },
 };
 
-- 
2.29.2

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 8/9] soc: ti: pm33xx: Enable basic PM runtime support for genpd

[Tony Lindgren]

To prepare for moving to use genpd, let's enable basic PM
runtime support.

Cc: Dave Gerlach <d-gerlach@ti.com>
Cc: Santosh Shilimkar <ssantosh@kernel.org>
Cc: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/soc/ti/pm33xx.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/drivers/soc/ti/pm33xx.c b/drivers/soc/ti/pm33xx.c
--- a/drivers/soc/ti/pm33xx.c
+++ b/drivers/soc/ti/pm33xx.c
@@ -19,6 +19,7 @@
 #include <linux/of_address.h>
 #include <linux/platform_data/pm33xx.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/rtc.h>
 #include <linux/rtc/rtc-omap.h>
 #include <linux/sizes.h>
@@ -555,16 +556,26 @@ static int am33xx_pm_probe(struct platform_device *pdev)
 	suspend_wfi_flags |= WFI_FLAG_WAKE_M3;
 #endif /* CONFIG_SUSPEND */
 
+	pm_runtime_enable(dev);
+	ret = pm_runtime_get_sync(dev);
+	if (ret < 0) {
+		pm_runtime_put_noidle(dev);
+		goto err_pm_runtime_disable;
+	}
+
 	ret = pm_ops->init(am33xx_do_sram_idle);
 	if (ret) {
 		dev_err(dev, "Unable to call core pm init!\n");
 		ret = -ENODEV;
-		goto err_put_wkup_m3_ipc;
+		goto err_pm_runtime_put;
 	}
 
 	return 0;
 
-err_put_wkup_m3_ipc:
+err_pm_runtime_put:
+	pm_runtime_put_sync(dev);
+err_pm_runtime_disable:
+	pm_runtime_disable(dev);
 	wkup_m3_ipc_put(m3_ipc);
 err_free_sram:
 	am33xx_pm_free_sram();
@@ -574,6 +585,8 @@ static int am33xx_pm_probe(struct platform_device *pdev)
 
 static int am33xx_pm_remove(struct platform_device *pdev)
 {
+	pm_runtime_put_sync(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
 	if (pm_ops->deinit)
 		pm_ops->deinit();
 	suspend_set_ops(NULL);
-- 
2.29.2

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 9/9] remoteproc/wkup_m3: Use reset control driver if available

[Tony Lindgren]

In order to move wkup_m3 to probe without platform data, let's add
support for using optional reset control driver if configured in the
dts. With this change and the related dts change, we can start
dropping the platform data for am335x.

And once wkup_m3 no longer needs platform data, we can simply drop the
related legacy reset platform data callbacks from wkup_m3 driver later
on after also am437x no longer depends on it.

Cc: linux-remoteproc@vger.kernel.org
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Dave Gerlach <d-gerlach@ti.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---

Please review and ack if no issues. If you guys instead want to set up an
immutable remoteproc branch with just this patch in it against v5.10-rc1
that works too :)

---
 drivers/remoteproc/wkup_m3_rproc.c | 41 ++++++++++++++++++++----------
 1 file changed, 28 insertions(+), 13 deletions(-)

diff --git a/drivers/remoteproc/wkup_m3_rproc.c b/drivers/remoteproc/wkup_m3_rproc.c
--- a/drivers/remoteproc/wkup_m3_rproc.c
+++ b/drivers/remoteproc/wkup_m3_rproc.c
@@ -17,6 +17,7 @@
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/remoteproc.h>
+#include <linux/reset.h>
 
 #include <linux/platform_data/wkup_m3.h>
 
@@ -43,11 +44,13 @@ struct wkup_m3_mem {
  * @rproc: rproc handle
  * @pdev: pointer to platform device
  * @mem: WkupM3 memory information
+ * @rsts: reset control
  */
 struct wkup_m3_rproc {
 	struct rproc *rproc;
 	struct platform_device *pdev;
 	struct wkup_m3_mem mem[WKUPM3_MEM_MAX];
+	struct reset_control *rsts;
 };
 
 static int wkup_m3_rproc_start(struct rproc *rproc)
@@ -56,13 +59,16 @@ static int wkup_m3_rproc_start(struct rproc *rproc)
 	struct platform_device *pdev = wkupm3->pdev;
 	struct device *dev = &pdev->dev;
 	struct wkup_m3_platform_data *pdata = dev_get_platdata(dev);
+	int error = 0;
 
-	if (pdata->deassert_reset(pdev, pdata->reset_name)) {
+	error = reset_control_deassert(wkupm3->rsts);
+
+	if (!wkupm3->rsts && pdata->deassert_reset(pdev, pdata->reset_name)) {
 		dev_err(dev, "Unable to reset wkup_m3!\n");
-		return -ENODEV;
+		error = -ENODEV;
 	}
 
-	return 0;
+	return error;
 }
 
 static int wkup_m3_rproc_stop(struct rproc *rproc)
@@ -71,13 +77,16 @@ static int wkup_m3_rproc_stop(struct rproc *rproc)
 	struct platform_device *pdev = wkupm3->pdev;
 	struct device *dev = &pdev->dev;
 	struct wkup_m3_platform_data *pdata = dev_get_platdata(dev);
+	int error = 0;
 
-	if (pdata->assert_reset(pdev, pdata->reset_name)) {
+	error = reset_control_assert(wkupm3->rsts);
+
+	if (!wkupm3->rsts && pdata->assert_reset(pdev, pdata->reset_name)) {
 		dev_err(dev, "Unable to assert reset of wkup_m3!\n");
-		return -ENODEV;
+		error = -ENODEV;
 	}
 
-	return 0;
+	return error;
 }
 
 static void *wkup_m3_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len)
@@ -132,12 +141,6 @@ static int wkup_m3_rproc_probe(struct platform_device *pdev)
 	int ret;
 	int i;
 
-	if (!(pdata && pdata->deassert_reset && pdata->assert_reset &&
-	      pdata->reset_name)) {
-		dev_err(dev, "Platform data missing!\n");
-		return -ENODEV;
-	}
-
 	ret = of_property_read_string(dev->of_node, "ti,pm-firmware",
 				      &fw_name);
 	if (ret) {
@@ -165,6 +168,18 @@ static int wkup_m3_rproc_probe(struct platform_device *pdev)
 	wkupm3->rproc = rproc;
 	wkupm3->pdev = pdev;
 
+	wkupm3->rsts = devm_reset_control_get_optional_shared(dev, "rstctrl");
+	if (IS_ERR(wkupm3->rsts))
+		return PTR_ERR(wkupm3->rsts);
+	if (!wkupm3->rsts) {
+		if (!(pdata && pdata->deassert_reset && pdata->assert_reset &&
+		      pdata->reset_name)) {
+			dev_err(dev, "Platform data missing!\n");
+			ret = -ENODEV;
+			goto err_put_rproc;
+		}
+	}
+
 	for (i = 0; i < ARRAY_SIZE(mem_names); i++) {
 		res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
 						   mem_names[i]);
@@ -173,7 +188,7 @@ static int wkup_m3_rproc_probe(struct platform_device *pdev)
 			dev_err(&pdev->dev, "devm_ioremap_resource failed for resource %d\n",
 				i);
 			ret = PTR_ERR(wkupm3->mem[i].cpu_addr);
-			goto err;
+			goto err_put_rproc;
 		}
 		wkupm3->mem[i].bus_addr = res->start;
 		wkupm3->mem[i].size = resource_size(res);
-- 
2.29.2

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel