From: Marc Zyngier <maz@kernel.org>
To: Neil Armstrong <narmstrong@baylibre.com>,
Kevin Hilman <khilman@baylibre.com>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Guillaume Tucker <guillaume.tucker@collabora.com>,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
linux-amlogic@lists.infradead.org, kernel-team@android.com,
linux-arm-kernel@lists.infradead.org,
Jerome Brunet <jbrunet@baylibre.com>
Subject: [PATCH 1/2] drm/meson: dw-hdmi: Disable clocks on driver teardown
Date: Fri, 20 Nov 2020 09:42:04 +0000 [thread overview]
Message-ID: <20201120094205.525228-2-maz@kernel.org> (raw)
In-Reply-To: <20201120094205.525228-1-maz@kernel.org>
The HDMI driver request clocks early, but never disable them, leaving
the clocks on even when the driver is removed.
Fix it by slightly refactoring the clock code, and register a devm
action that will eventually disable/unprepare the enabled clocks.
Signed-off-by: Marc Zyngier <maz@kernel.org>
---
drivers/gpu/drm/meson/meson_dw_hdmi.c | 43 ++++++++++++++++++---------
1 file changed, 29 insertions(+), 14 deletions(-)
diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c b/drivers/gpu/drm/meson/meson_dw_hdmi.c
index 7f8eea494147..29623b309cb1 100644
--- a/drivers/gpu/drm/meson/meson_dw_hdmi.c
+++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c
@@ -145,8 +145,6 @@ struct meson_dw_hdmi {
struct reset_control *hdmitx_apb;
struct reset_control *hdmitx_ctrl;
struct reset_control *hdmitx_phy;
- struct clk *hdmi_pclk;
- struct clk *venci_clk;
struct regulator *hdmi_supply;
u32 irq_stat;
struct dw_hdmi *hdmi;
@@ -946,6 +944,29 @@ static void meson_disable_regulator(void *data)
regulator_disable(data);
}
+static void meson_disable_clk(void *data)
+{
+ clk_disable_unprepare(data);
+}
+
+static int meson_enable_clk(struct device *dev, char *name)
+{
+ struct clk *clk;
+ int ret;
+
+ clk = devm_clk_get(dev, name);
+ if (IS_ERR(clk)) {
+ dev_err(dev, "Unable to get %s pclk\n", name);
+ return PTR_ERR(clk);
+ }
+
+ ret = clk_prepare_enable(clk);
+ if (!ret)
+ ret = devm_add_action_or_reset(dev, meson_disable_clk, clk);
+
+ return ret;
+}
+
static int meson_dw_hdmi_bind(struct device *dev, struct device *master,
void *data)
{
@@ -1026,19 +1047,13 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master,
if (IS_ERR(meson_dw_hdmi->hdmitx))
return PTR_ERR(meson_dw_hdmi->hdmitx);
- meson_dw_hdmi->hdmi_pclk = devm_clk_get(dev, "isfr");
- if (IS_ERR(meson_dw_hdmi->hdmi_pclk)) {
- dev_err(dev, "Unable to get HDMI pclk\n");
- return PTR_ERR(meson_dw_hdmi->hdmi_pclk);
- }
- clk_prepare_enable(meson_dw_hdmi->hdmi_pclk);
+ ret = meson_enable_clk(dev, "isfr");
+ if (ret)
+ return ret;
- meson_dw_hdmi->venci_clk = devm_clk_get(dev, "venci");
- if (IS_ERR(meson_dw_hdmi->venci_clk)) {
- dev_err(dev, "Unable to get venci clk\n");
- return PTR_ERR(meson_dw_hdmi->venci_clk);
- }
- clk_prepare_enable(meson_dw_hdmi->venci_clk);
+ ret = meson_enable_clk(dev, "venci");
+ if (ret)
+ return ret;
dw_plat_data->regm = devm_regmap_init(dev, NULL, meson_dw_hdmi,
&meson_dw_hdmi_regmap_config);
--
2.28.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-11-20 9:43 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-20 9:42 [PATCH 0/2] More meson HDMI fixes Marc Zyngier
2020-11-20 9:42 ` Marc Zyngier [this message]
2020-11-20 12:26 ` [PATCH 1/2] drm/meson: dw-hdmi: Disable clocks on driver teardown Neil Armstrong
2020-11-23 14:03 ` Jerome Brunet
2020-11-23 14:15 ` Marc Zyngier
2020-11-20 9:42 ` [PATCH 2/2] drm/meson: dw-hdmi: Enable the iahb clock early enough Marc Zyngier
2020-11-20 10:54 ` Guillaume Tucker
2020-11-20 11:10 ` Marc Zyngier
2020-11-20 12:18 ` Neil Armstrong
2020-11-20 12:27 ` Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201120094205.525228-2-maz@kernel.org \
--to=maz@kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=guillaume.tucker@collabora.com \
--cc=jbrunet@baylibre.com \
--cc=kernel-team@android.com \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=martin.blumenstingl@googlemail.com \
--cc=narmstrong@baylibre.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).