public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: Maxime Ripard <maxime@cerno.tech>
To: Daniel Vetter <daniel.vetter@intel.com>,
	David Airlie <airlied@linux.ie>, Eric Anholt <eric@anholt.net>,
	Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	Maxime Ripard <maxime@cerno.tech>
Cc: Tim Gover <tim.gover@raspberrypi.com>,
	Dave Stevenson <dave.stevenson@raspberrypi.com>,
	dri-devel@lists.freedesktop.org,
	Hoegeun Kwon <hoegeun.kwon@samsung.com>,
	bcm-kernel-feedback-list@broadcom.com,
	linux-rpi-kernel@lists.infradead.org,
	Phil Elwell <phil@raspberrypi.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 2/2] drm/vc4: kms: Don't disable the muxing of an active CRTC
Date: Fri, 20 Nov 2020 15:42:45 +0100	[thread overview]
Message-ID: <20201120144245.398711-3-maxime@cerno.tech> (raw)
In-Reply-To: <20201120144245.398711-1-maxime@cerno.tech>

The current HVS muxing code will consider the CRTCs in a given state to
setup their muxing in the HVS, and disable the other CRTCs muxes.

However, it's valid to only update a single CRTC with a state, and in this
situation we would mux out a CRTC that was enabled but left untouched by
the new state.

Fix this by setting a flag on the CRTC state when the muxing has been
changed, and only change the muxing configuration when that flag is there.

Fixes: 87ebcd42fb7b ("drm/vc4: crtc: Assign output to channel automatically")
Reviewed-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_drv.h |  3 ++
 drivers/gpu/drm/vc4/vc4_kms.c | 81 +++++++++++++++++++----------------
 2 files changed, 48 insertions(+), 36 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_drv.h b/drivers/gpu/drm/vc4/vc4_drv.h
index fcfeef0949af..c5f2944d5bc6 100644
--- a/drivers/gpu/drm/vc4/vc4_drv.h
+++ b/drivers/gpu/drm/vc4/vc4_drv.h
@@ -532,6 +532,9 @@ struct vc4_crtc_state {
 		unsigned int top;
 		unsigned int bottom;
 	} margins;
+
+	/* Transitional state below, only valid during atomic commits */
+	bool update_muxing;
 };
 
 #define VC4_HVS_CHANNEL_DISABLED ((unsigned int)-1)
diff --git a/drivers/gpu/drm/vc4/vc4_kms.c b/drivers/gpu/drm/vc4/vc4_kms.c
index 0bbd7b554275..ba310c0ab5f6 100644
--- a/drivers/gpu/drm/vc4/vc4_kms.c
+++ b/drivers/gpu/drm/vc4/vc4_kms.c
@@ -239,10 +239,7 @@ static void vc5_hvs_pv_muxing_commit(struct vc4_dev *vc4,
 {
 	struct drm_crtc_state *crtc_state;
 	struct drm_crtc *crtc;
-	unsigned char dsp2_mux = 0;
-	unsigned char dsp3_mux = 3;
-	unsigned char dsp4_mux = 3;
-	unsigned char dsp5_mux = 3;
+	unsigned char mux;
 	unsigned int i;
 	u32 reg;
 
@@ -250,50 +247,59 @@ static void vc5_hvs_pv_muxing_commit(struct vc4_dev *vc4,
 		struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(crtc_state);
 		struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
 
-		if (!crtc_state->active)
+		if (!vc4_state->update_muxing)
 			continue;
 
 		switch (vc4_crtc->data->hvs_output) {
 		case 2:
-			dsp2_mux = (vc4_state->assigned_channel == 2) ? 0 : 1;
+			mux = (vc4_state->assigned_channel == 2) ? 0 : 1;
+			reg = HVS_READ(SCALER_DISPECTRL);
+			HVS_WRITE(SCALER_DISPECTRL,
+				  (reg & ~SCALER_DISPECTRL_DSP2_MUX_MASK) |
+				  VC4_SET_FIELD(mux, SCALER_DISPECTRL_DSP2_MUX));
 			break;
 
 		case 3:
-			dsp3_mux = vc4_state->assigned_channel;
+			if (vc4_state->assigned_channel == VC4_HVS_CHANNEL_DISABLED)
+				mux = 3;
+			else
+				mux = vc4_state->assigned_channel;
+
+			reg = HVS_READ(SCALER_DISPCTRL);
+			HVS_WRITE(SCALER_DISPCTRL,
+				  (reg & ~SCALER_DISPCTRL_DSP3_MUX_MASK) |
+				  VC4_SET_FIELD(mux, SCALER_DISPCTRL_DSP3_MUX));
 			break;
 
 		case 4:
-			dsp4_mux = vc4_state->assigned_channel;
+			if (vc4_state->assigned_channel == VC4_HVS_CHANNEL_DISABLED)
+				mux = 3;
+			else
+				mux = vc4_state->assigned_channel;
+
+			reg = HVS_READ(SCALER_DISPEOLN);
+			HVS_WRITE(SCALER_DISPEOLN,
+				  (reg & ~SCALER_DISPEOLN_DSP4_MUX_MASK) |
+				  VC4_SET_FIELD(mux, SCALER_DISPEOLN_DSP4_MUX));
+
 			break;
 
 		case 5:
-			dsp5_mux = vc4_state->assigned_channel;
+			if (vc4_state->assigned_channel == VC4_HVS_CHANNEL_DISABLED)
+				mux = 3;
+			else
+				mux = vc4_state->assigned_channel;
+
+			reg = HVS_READ(SCALER_DISPDITHER);
+			HVS_WRITE(SCALER_DISPDITHER,
+				  (reg & ~SCALER_DISPDITHER_DSP5_MUX_MASK) |
+				  VC4_SET_FIELD(mux, SCALER_DISPDITHER_DSP5_MUX));
 			break;
 
 		default:
 			break;
 		}
 	}
-
-	reg = HVS_READ(SCALER_DISPECTRL);
-	HVS_WRITE(SCALER_DISPECTRL,
-		  (reg & ~SCALER_DISPECTRL_DSP2_MUX_MASK) |
-		  VC4_SET_FIELD(dsp2_mux, SCALER_DISPECTRL_DSP2_MUX));
-
-	reg = HVS_READ(SCALER_DISPCTRL);
-	HVS_WRITE(SCALER_DISPCTRL,
-		  (reg & ~SCALER_DISPCTRL_DSP3_MUX_MASK) |
-		  VC4_SET_FIELD(dsp3_mux, SCALER_DISPCTRL_DSP3_MUX));
-
-	reg = HVS_READ(SCALER_DISPEOLN);
-	HVS_WRITE(SCALER_DISPEOLN,
-		  (reg & ~SCALER_DISPEOLN_DSP4_MUX_MASK) |
-		  VC4_SET_FIELD(dsp4_mux, SCALER_DISPEOLN_DSP4_MUX));
-
-	reg = HVS_READ(SCALER_DISPDITHER);
-	HVS_WRITE(SCALER_DISPDITHER,
-		  (reg & ~SCALER_DISPDITHER_DSP5_MUX_MASK) |
-		  VC4_SET_FIELD(dsp5_mux, SCALER_DISPDITHER_DSP5_MUX));
 }
 
 static void
@@ -789,17 +795,20 @@ static int vc4_pv_muxing_atomic_check(struct drm_device *dev,
 		struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
 		unsigned int matching_channels;
 
-		if (old_crtc_state->enable && !new_crtc_state->enable) {
+		/* Nothing to do here, let's skip it */
+		if (old_crtc_state->enable == new_crtc_state->enable)
+			continue;
+
+		/* Muxing will need to be modified, mark it as such */
+		new_vc4_crtc_state->update_muxing = true;
+
+		/* If we're disabling our CRTC, we put back our channel */
+		if (!new_crtc_state->enable) {
 			hvs_new_state->unassigned_channels |= BIT(old_vc4_crtc_state->assigned_channel);
 			new_vc4_crtc_state->assigned_channel = VC4_HVS_CHANNEL_DISABLED;
+			continue;
 		}
 
-		if (!new_crtc_state->enable)
-			continue;
-
-		if (new_vc4_crtc_state->assigned_channel != VC4_HVS_CHANNEL_DISABLED)
-			continue;
-
 		/*
 		 * The problem we have to solve here is that we have
 		 * up to 7 encoders, connected to up to 6 CRTCs.
-- 
2.28.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2020-11-20 14:44 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-20 14:42 [PATCH v4 0/2] drm/vc4: Rework the HVS muxing code Maxime Ripard
2020-11-20 14:42 ` [PATCH v4 1/2] drm/vc4: kms: Store the unassigned channel list in the state Maxime Ripard
2020-11-20 14:42 ` Maxime Ripard [this message]
2020-11-23  7:50   ` [PATCH v4 2/2] drm/vc4: kms: Don't disable the muxing of an active CRTC Thomas Zimmermann
2020-11-23 16:59     ` Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201120144245.398711-3-maxime@cerno.tech \
    --to=maxime@cerno.tech \
    --cc=airlied@linux.ie \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=daniel.vetter@intel.com \
    --cc=dave.stevenson@raspberrypi.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=eric@anholt.net \
    --cc=hoegeun.kwon@samsung.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-rpi-kernel@lists.infradead.org \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=phil@raspberrypi.com \
    --cc=tim.gover@raspberrypi.com \
    --cc=tzimmermann@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox