From: Tzung-Bi Shih <tzungbi@google.com>
To: ohad@wizery.com, bjorn.andersson@linaro.org
Cc: mathieu.poirier@linaro.org, erin.lo@mediatek.com,
linux-remoteproc@vger.kernel.org, tzungbi@google.com,
linux-mediatek@lists.infradead.org, pihsun@chromium.org,
matthias.bgg@gmail.com, linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3] remoteproc/mediatek: read IPI buffer offset from FW
Date: Mon, 30 Nov 2020 11:40:25 +0800 [thread overview]
Message-ID: <20201130034025.3232229-1-tzungbi@google.com> (raw)
Reads the IPI buffer offset from the FW binary. The information resides
in addr of .ipi_buffer section.
Moves scp_ipi_init() to scp_load() phase. The IPI buffer can be
initialized only if the offset is clear.
To backward compatible to MT8183 SCP, specify the offset in the board
specific mtk_scp_of_data. Reads the default offset if the firmware
doesn't have it.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
---
Previous discussion:
https://patchwork.kernel.org/project/linux-remoteproc/patch/20201127092941.1646260-1-tzungbi@google.com/
Changes from v2:
- to backward-compatible, reads the default offset if the firmware doesn't
have it
drivers/remoteproc/mtk_common.h | 2 +
drivers/remoteproc/mtk_scp.c | 79 +++++++++++++++++++++++----------
2 files changed, 57 insertions(+), 24 deletions(-)
diff --git a/drivers/remoteproc/mtk_common.h b/drivers/remoteproc/mtk_common.h
index b3397d327786..5169ddce2dc7 100644
--- a/drivers/remoteproc/mtk_common.h
+++ b/drivers/remoteproc/mtk_common.h
@@ -78,6 +78,8 @@ struct mtk_scp_of_data {
u32 host_to_scp_reg;
u32 host_to_scp_int_bit;
+
+ size_t ipi_buf_offset;
};
struct mtk_scp {
diff --git a/drivers/remoteproc/mtk_scp.c b/drivers/remoteproc/mtk_scp.c
index 5f42b9ce7185..5392c2fff682 100644
--- a/drivers/remoteproc/mtk_scp.c
+++ b/drivers/remoteproc/mtk_scp.c
@@ -21,7 +21,7 @@
#include "remoteproc_internal.h"
#define MAX_CODE_SIZE 0x500000
-#define SCP_FW_END 0x7C000
+#define SECTION_NAME_IPI_BUFFER ".ipi_buffer"
/**
* scp_get() - get a reference to SCP.
@@ -119,16 +119,29 @@ static void scp_ipi_handler(struct mtk_scp *scp)
wake_up(&scp->ack_wq);
}
-static int scp_ipi_init(struct mtk_scp *scp)
+static int scp_elf_read_ipi_buf_addr(struct mtk_scp *scp,
+ const struct firmware *fw,
+ size_t *offset);
+
+static int scp_ipi_init(struct mtk_scp *scp, const struct firmware *fw)
{
- size_t send_offset = SCP_FW_END - sizeof(struct mtk_share_obj);
- size_t recv_offset = send_offset - sizeof(struct mtk_share_obj);
+ int ret;
+ size_t offset;
+
+ /* read the ipi buf addr from FW itself first */
+ ret = scp_elf_read_ipi_buf_addr(scp, fw, &offset);
+ if (ret) {
+ /* use default ipi buf addr if the FW doesn't have it */
+ offset = scp->data->ipi_buf_offset;
+ if (!offset)
+ return ret;
+ }
+ dev_info(scp->dev, "IPI buf addr %#010zx\n", offset);
- /* shared buffer initialization */
- scp->recv_buf =
- (struct mtk_share_obj __iomem *)(scp->sram_base + recv_offset);
- scp->send_buf =
- (struct mtk_share_obj __iomem *)(scp->sram_base + send_offset);
+ scp->recv_buf = (struct mtk_share_obj __iomem *)
+ (scp->sram_base + offset);
+ scp->send_buf = (struct mtk_share_obj __iomem *)
+ (scp->sram_base + offset + sizeof(*scp->recv_buf));
memset_io(scp->recv_buf, 0, sizeof(*scp->recv_buf));
memset_io(scp->send_buf, 0, sizeof(*scp->send_buf));
@@ -271,6 +284,32 @@ static int scp_elf_load_segments(struct rproc *rproc, const struct firmware *fw)
return ret;
}
+static int scp_elf_read_ipi_buf_addr(struct mtk_scp *scp,
+ const struct firmware *fw,
+ size_t *offset)
+{
+ struct elf32_hdr *ehdr;
+ struct elf32_shdr *shdr, *shdr_strtab;
+ int i;
+ const u8 *elf_data = fw->data;
+ const char *strtab;
+
+ ehdr = (struct elf32_hdr *)elf_data;
+ shdr = (struct elf32_shdr *)(elf_data + ehdr->e_shoff);
+ shdr_strtab = shdr + ehdr->e_shstrndx;
+ strtab = (const char *)(elf_data + shdr_strtab->sh_offset);
+
+ for (i = 0; i < ehdr->e_shnum; i++, shdr++) {
+ if (strcmp(strtab + shdr->sh_name,
+ SECTION_NAME_IPI_BUFFER) == 0) {
+ *offset = shdr->sh_addr;
+ return 0;
+ }
+ }
+
+ return -ENOENT;
+}
+
static int mt8183_scp_before_load(struct mtk_scp *scp)
{
/* Clear SCP to host interrupt */
@@ -350,11 +389,15 @@ static int scp_load(struct rproc *rproc, const struct firmware *fw)
ret = scp->data->scp_before_load(scp);
if (ret < 0)
- return ret;
+ goto leave;
ret = scp_elf_load_segments(rproc, fw);
- clk_disable_unprepare(scp->clk);
+ if (ret)
+ goto leave;
+ ret = scp_ipi_init(scp, fw);
+leave:
+ clk_disable_unprepare(scp->clk);
return ret;
}
@@ -680,19 +723,6 @@ static int scp_probe(struct platform_device *pdev)
goto release_dev_mem;
}
- ret = clk_prepare_enable(scp->clk);
- if (ret) {
- dev_err(dev, "failed to enable clocks\n");
- goto release_dev_mem;
- }
-
- ret = scp_ipi_init(scp);
- clk_disable_unprepare(scp->clk);
- if (ret) {
- dev_err(dev, "Failed to init ipi\n");
- goto release_dev_mem;
- }
-
/* register SCP initialization IPI */
ret = scp_ipi_register(scp, SCP_IPI_INIT, scp_init_ipi_handler, scp);
if (ret) {
@@ -760,6 +790,7 @@ static const struct mtk_scp_of_data mt8183_of_data = {
.scp_stop = mt8183_scp_stop,
.host_to_scp_reg = MT8183_HOST_TO_SCP,
.host_to_scp_int_bit = MT8183_HOST_IPC_INT_BIT,
+ .ipi_buf_offset = 0x7bdb0,
};
static const struct mtk_scp_of_data mt8192_of_data = {
--
2.29.2.454.gaff20da3a2-goog
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2020-11-30 3:42 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-30 3:40 Tzung-Bi Shih [this message]
2020-12-01 19:03 ` [PATCH v3] remoteproc/mediatek: read IPI buffer offset from FW Mathieu Poirier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201130034025.3232229-1-tzungbi@google.com \
--to=tzungbi@google.com \
--cc=bjorn.andersson@linaro.org \
--cc=erin.lo@mediatek.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=mathieu.poirier@linaro.org \
--cc=matthias.bgg@gmail.com \
--cc=ohad@wizery.com \
--cc=pihsun@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox