* [PATCH v3] phy: amlogic: phy-meson-gxl-usb2: keep ID pull-up even in Host mode
@ 2020-11-20 15:38 Neil Armstrong
2020-11-30 11:01 ` Vinod Koul
0 siblings, 1 reply; 2+ messages in thread
From: Neil Armstrong @ 2020-11-20 15:38 UTC (permalink / raw)
To: vkoul, kishon
Cc: Neil Armstrong, Martin Blumenstingl, Kevin Hilman, linux-kernel,
linux-amlogic, linux-arm-kernel
In order to keep OTG ID detection even when in Host mode, the ID line of
the PHY (if the current phy is an OTG one) pull-up should be kept
enable in both modes.
This fixes OTG switch on GXL, GXM & AXG platforms, otherwise once switched
to Host, the ID detection doesn't work anymore to switch back to Device.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
drivers/phy/amlogic/phy-meson-gxl-usb2.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/phy/amlogic/phy-meson-gxl-usb2.c b/drivers/phy/amlogic/phy-meson-gxl-usb2.c
index 875afb2672c7..2b3c0d730f20 100644
--- a/drivers/phy/amlogic/phy-meson-gxl-usb2.c
+++ b/drivers/phy/amlogic/phy-meson-gxl-usb2.c
@@ -158,7 +158,8 @@ static int phy_meson_gxl_usb2_set_mode(struct phy *phy,
U2P_R0_DM_PULLDOWN);
regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_DP_PULLDOWN,
U2P_R0_DP_PULLDOWN);
- regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_ID_PULLUP, 0);
+ regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_ID_PULLUP,
+ U2P_R0_ID_PULLUP);
break;
case PHY_MODE_USB_DEVICE:
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH v3] phy: amlogic: phy-meson-gxl-usb2: keep ID pull-up even in Host mode
2020-11-20 15:38 [PATCH v3] phy: amlogic: phy-meson-gxl-usb2: keep ID pull-up even in Host mode Neil Armstrong
@ 2020-11-30 11:01 ` Vinod Koul
0 siblings, 0 replies; 2+ messages in thread
From: Vinod Koul @ 2020-11-30 11:01 UTC (permalink / raw)
To: Neil Armstrong
Cc: Martin Blumenstingl, Kevin Hilman, linux-kernel, kishon,
linux-amlogic, linux-arm-kernel
On 20-11-20, 16:38, Neil Armstrong wrote:
> In order to keep OTG ID detection even when in Host mode, the ID line of
> the PHY (if the current phy is an OTG one) pull-up should be kept
> enable in both modes.
>
> This fixes OTG switch on GXL, GXM & AXG platforms, otherwise once switched
> to Host, the ID detection doesn't work anymore to switch back to Device.
Applied, thanks
--
~Vinod
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-11-30 11:02 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-11-20 15:38 [PATCH v3] phy: amlogic: phy-meson-gxl-usb2: keep ID pull-up even in Host mode Neil Armstrong
2020-11-30 11:01 ` Vinod Koul
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).