[PATCH V2 1/2] arm64: dts: imx8mm-beacon-som: Configure RTC aliases

[PATCH V2 1/2] arm64: dts: imx8mm-beacon-som: Configure RTC aliases

[Adam Ford]

On the i.MX8MM Beacon SOM, there is an RTC chip which is fed power
from the baseboard during power off.  The SNVS RTC integrated into
the SoC is not fed power.  Depending on the order the modules are
loaded, this can be a problem if the external RTC isn't rtc0.

Make the alias for rtc0 point to the external RTC all the time and
rtc1 point to the SVNS in order to correctly hold date/time over
a power-cycle.

Signed-off-by: Adam Ford <aford173@gmail.com>
---
V2:  Remove fixes tag

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
index 5565775270f9..9bdefbba9e90 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
@@ -4,6 +4,11 @@
  */
 
 / {
+	aliases {
+		rtc0 = &rtc;
+		rtc1 = &snvs_rtc;
+	};
+
 	usdhc1_pwrseq: usdhc1_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		pinctrl-names = "default";
@@ -219,7 +224,7 @@ eeprom@50 {
 		reg = <0x50>;
 	};
 
-	rtc@51 {
+	rtc: rtc@51 {
 		compatible = "nxp,pcf85263";
 		reg = <0x51>;
 	};
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH V2 2/2] arm64: dts: imx8mm-beacon-som: Assign PMIC clock

[Adam Ford]

The PMIC throws an errors because the clock isn't assigned to it.
Fix this by assigning the clocks info.

Signed-off-by: Adam Ford <aford173@gmail.com>
---
V2:  Remove fixes tag

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
index 9bdefbba9e90..d897913537ca 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
@@ -111,6 +111,10 @@ pmic@4b {
 		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 		rohm,reset-snvs-powered;
 
+		#clock-cells = <0>;
+		clocks = <&osc_32k 0>;
+		clock-output-names = "clk-32k-out";
+
 		regulators {
 			buck1_reg: BUCK1 {
 				regulator-name = "buck1";
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH V2 1/2] arm64: dts: imx8mm-beacon-som: Configure RTC aliases

[Shawn Guo]

On Thu, Nov 26, 2020 at 04:45:34AM -0600, Adam Ford wrote:
> On the i.MX8MM Beacon SOM, there is an RTC chip which is fed power
> from the baseboard during power off.  The SNVS RTC integrated into
> the SoC is not fed power.  Depending on the order the modules are
> loaded, this can be a problem if the external RTC isn't rtc0.
> 
> Make the alias for rtc0 point to the external RTC all the time and
> rtc1 point to the SVNS in order to correctly hold date/time over
> a power-cycle.
> 
> Signed-off-by: Adam Ford <aford173@gmail.com>

Applied both, thanks.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel