Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Yanan Wang <wangyanan55@huawei.com>
To: <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	Marc Zyngier <maz@kernel.org>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will@kernel.org>, James Morse <james.morse@arm.com>,
	"Julien Thierry" <julien.thierry.kdev@gmail.com>,
	Suzuki K Poulose <suzuki.poulose@arm.com>,
	Gavin Shan <gshan@redhat.com>,
	Quentin Perret <qperret@google.com>
Cc: lushenming@huawei.com, jiangkunkun@huawei.com,
	Yanan Wang <wangyanan55@huawei.com>,
	yezengruan@huawei.com, wangjingyi11@huawei.com,
	yuzenghui@huawei.com, wanghaibin.wang@huawei.com,
	zhukeqian1@huawei.com
Subject: [PATCH v2 3/3] KVM: arm64: Add usage of stage 2 fault lookup level in user_mem_abort()
Date: Wed, 2 Dec 2020 04:10:34 +0800	[thread overview]
Message-ID: <20201201201034.116760-4-wangyanan55@huawei.com> (raw)
In-Reply-To: <20201201201034.116760-1-wangyanan55@huawei.com>

If we get a FSC_PERM fault, just using (logging_active && writable) to
determine calling kvm_pgtable_stage2_map(). There will be two more cases
we should consider.

(1) After logging_active is configged back to false from true. When we
get a FSC_PERM fault with write_fault and adjustment of hugepage is needed,
we should merge tables back to a block entry. This case is ignored by still
calling kvm_pgtable_stage2_relax_perms(), which will lead to an endless
loop and guest panic due to soft lockup.

(2) We use (FSC_PERM && logging_active && writable) to determine
collapsing a block entry into a table by calling kvm_pgtable_stage2_map().
But sometimes we may only need to relax permissions when trying to write
to a page other than a block.
In this condition,using kvm_pgtable_stage2_relax_perms() will be fine.

The ISS filed bit[1:0] in ESR_EL2 regesiter indicates the stage2 lookup
level at which a D-abort or I-abort occurred. By comparing granule of
the fault lookup level with vma_pagesize, we can strictly distinguish
conditions of calling kvm_pgtable_stage2_relax_perms() or
kvm_pgtable_stage2_map(), and the above two cases will be well considered.

Suggested-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
---
 arch/arm64/include/asm/esr.h         |  1 +
 arch/arm64/include/asm/kvm_emulate.h |  5 +++++
 arch/arm64/kvm/mmu.c                 | 11 +++++++++--
 3 files changed, 15 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/include/asm/esr.h b/arch/arm64/include/asm/esr.h
index 22c81f1edda2..85a3e49f92f4 100644
--- a/arch/arm64/include/asm/esr.h
+++ b/arch/arm64/include/asm/esr.h
@@ -104,6 +104,7 @@
 /* Shared ISS fault status code(IFSC/DFSC) for Data/Instruction aborts */
 #define ESR_ELx_FSC		(0x3F)
 #define ESR_ELx_FSC_TYPE	(0x3C)
+#define ESR_ELx_FSC_LEVEL	(0x03)
 #define ESR_ELx_FSC_EXTABT	(0x10)
 #define ESR_ELx_FSC_SERROR	(0x11)
 #define ESR_ELx_FSC_ACCESS	(0x08)
diff --git a/arch/arm64/include/asm/kvm_emulate.h b/arch/arm64/include/asm/kvm_emulate.h
index 5ef2669ccd6c..00bc6f1234ba 100644
--- a/arch/arm64/include/asm/kvm_emulate.h
+++ b/arch/arm64/include/asm/kvm_emulate.h
@@ -350,6 +350,11 @@ static __always_inline u8 kvm_vcpu_trap_get_fault_type(const struct kvm_vcpu *vc
 	return kvm_vcpu_get_esr(vcpu) & ESR_ELx_FSC_TYPE;
 }
 
+static __always_inline u8 kvm_vcpu_trap_get_fault_level(const struct kvm_vcpu *vcpu)
+{
+	return kvm_vcpu_get_esr(vcpu) & ESR_ELx_FSC_LEVEL;
+}
+
 static __always_inline bool kvm_vcpu_abt_issea(const struct kvm_vcpu *vcpu)
 {
 	switch (kvm_vcpu_trap_get_fault(vcpu)) {
diff --git a/arch/arm64/kvm/mmu.c b/arch/arm64/kvm/mmu.c
index 1a01da9fdc99..75814a02d189 100644
--- a/arch/arm64/kvm/mmu.c
+++ b/arch/arm64/kvm/mmu.c
@@ -754,10 +754,12 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 	gfn_t gfn;
 	kvm_pfn_t pfn;
 	bool logging_active = memslot_is_logging(memslot);
-	unsigned long vma_pagesize;
+	unsigned long fault_level = kvm_vcpu_trap_get_fault_level(vcpu);
+	unsigned long vma_pagesize, fault_granule;
 	enum kvm_pgtable_prot prot = KVM_PGTABLE_PROT_R;
 	struct kvm_pgtable *pgt;
 
+	fault_granule = 1UL << ARM64_HW_PGTABLE_LEVEL_SHIFT(fault_level);
 	write_fault = kvm_is_write_fault(vcpu);
 	exec_fault = kvm_vcpu_trap_is_exec_fault(vcpu);
 	VM_BUG_ON(write_fault && exec_fault);
@@ -896,7 +898,12 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 	else if (cpus_have_const_cap(ARM64_HAS_CACHE_DIC))
 		prot |= KVM_PGTABLE_PROT_X;
 
-	if (fault_status == FSC_PERM && !(logging_active && writable)) {
+	/*
+	 * Under the premise of getting a FSC_PERM fault, we just need to relax
+	 * permissions only if vma_pagesize equals fault_granule. Otherwise,
+	 * kvm_pgtable_stage2_map() should be called to change block size.
+	 */
+	if (fault_status == FSC_PERM && vma_pagesize == fault_granule) {
 		ret = kvm_pgtable_stage2_relax_perms(pgt, fault_ipa, prot);
 	} else {
 		ret = kvm_pgtable_stage2_map(pgt, fault_ipa, vma_pagesize,
-- 
2.19.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2020-12-01 20:12 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-01 20:10 [PATCH v2 0/3] Fix several bugs in KVM stage 2 translation Yanan Wang
2020-12-01 20:10 ` [PATCH v2 1/3] KVM: arm64: Fix possible memory leak in kvm stage2 Yanan Wang
2020-12-01 20:10 ` [PATCH v2 2/3] KVM: arm64: Fix handling of merging tables into a block entry Yanan Wang
2020-12-01 20:10 ` Yanan Wang [this message]
2020-12-01 20:59 ` [PATCH v2 0/3] Fix several bugs in KVM stage 2 translation Will Deacon
2020-12-02 12:00   ` wangyanan (Y)
2020-12-02 12:23     ` Marc Zyngier
2020-12-02 12:50       ` wangyanan (Y)
2020-12-02 12:24 ` Marc Zyngier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201201201034.116760-4-wangyanan55@huawei.com \
    --to=wangyanan55@huawei.com \
    --cc=catalin.marinas@arm.com \
    --cc=gshan@redhat.com \
    --cc=james.morse@arm.com \
    --cc=jiangkunkun@huawei.com \
    --cc=julien.thierry.kdev@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lushenming@huawei.com \
    --cc=maz@kernel.org \
    --cc=qperret@google.com \
    --cc=suzuki.poulose@arm.com \
    --cc=wanghaibin.wang@huawei.com \
    --cc=wangjingyi11@huawei.com \
    --cc=will@kernel.org \
    --cc=yezengruan@huawei.com \
    --cc=yuzenghui@huawei.com \
    --cc=zhukeqian1@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox